The machine is up and running, so my picture should be correct. This new control box seems to be a third version that works with the Brewtus. I bought my 230V version box from http://www.avola-coffeesystems.de and it is called Elektronik Box Rl30/1e-2r/f Stm8 230vac if someone else have the same problem in the future and lives in europe.
/David On Tue, Jan 10, 2023 at 2:47 PM David Bengtsson <[email protected]> wrote: > > Got my new control box. Before I do something. stupid, is this > correct? Old box to the left 12345678 and how I think it should be to > the right. (See attached image) > > /David > > On Mon, Jan 2, 2023 at 4:54 PM David Bengtsson <[email protected]> wrote: > > > > Found an old discussion about a similar problem and I guess I have to > > replace the control box (or at least a relay inside the control box) > > Found the newer version of the Giemme control box in stock in Germany > > so I ordered it and hopefully it is 100 EUR well spent... > > > > On Mon, Jan 2, 2023 at 2:45 PM David Bengtsson <[email protected]> wrote: > > > > > > Hello again, > > > > > > More info about my problem. Maybe someone can give me some advice. The > > > problem I have is related to the water fill up of the boiler. I just > > > tried to use the water tap and I got hot water, but the boiler is not > > > refilling. No sound from the pump! > > > > > > So I guess the sensor that is adjusting the water level is broken or > > > the control box? > > > The fill up is working in the morning when I turn on a cold machine. > > > Pump is running for at least 10 seconds when I power on the machine. > > > > > > How can I fix this? > > > > > > TIA, > > > /David > > > > > > On Thu, Dec 29, 2022 at 8:01 AM David Bengtsson <[email protected]> wrote: > > > > > > > > Hello espresso lovers! > > > > > > > > I have an old Brewtus II and a few days ago it started to act > > > > different. It is still working, but I am getting a bit nervous that > > > > this is the beginning of something bad happening to the machine. > > > > > > > > I have two symptoms: > > > > > > > > 1. When I pull the lever to pull a shot, there is a delay before the > > > > pump starts. This delay is longer if the time since the last shot is > > > > long. Here is a video: https://youtu.be/62q8mFs6D_8 > > > > > > > > 2. I have the machine on a timer. Normally the pump runs for two > > > > seconds or so when it gets powered on in the morning. Now, the pump > > > > runs for at least 10 seconds, filling up the boiler. > > > > > > > > Any ideas what's wrong? Some kind of leak? > > > > > > > > /David -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/brewtus/CAM0ZN6CVBaUL1j5pNS0L8A0KTNwKjW8J%2B%3Dzm-%3DDNsM5gnxwkYw%40mail.gmail.com.
