Re: Brewtus IV Steam Wand Seal

[Greg Shaw]

Thanks for the quick replies and suggestions.  I used Teflon tape and it appears to have fixed the leak, for now… - Sent from my mobile device On Jan 18, 2025, at 12:05 PM, Adam Meade <awmeadem...@gmail.com> wrote:  I bought a high temp Teflon tape that worked well for my machine.  Good luck On Sat, Jan 18, 2025, 3:02 PM Herman Dickens <hermandick...@gmail.com> wrote: It looks like a flared fitting. if the inside of the other fitting is flared it shouldn't need any sealant, although I doubt teflon tape would hurt anything as long as it doesn't get inside of the valve. Herman On Sat, Jan 18, 2025 at 2:53 PM Greg Shaw <grshaw1...@gmail.com> wrote: Hello All I have a Brewtus IV.  The seal on my steam wand started to leak - see the attached picture. My question is, As it looks like some sort of applied sealant and not a gasket, can I use teflon tape or is there a recommended sealant (food safe?) to use? Thanks in advance! -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/brewtus/CALHjB%2BXSUVJGE4GdL8JBm0wC52QCNAZX7BRHj5aLLPZ39tAppQ%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/brewtus/CAM9mha1tmGUbvcFbi7YVLG9uQHrbOqaa0MxDxX33dL81z_91Cg%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/brewtus/CAOJZtCKPf60bZWG3dHaafatO%3DxzrnHNro8jHVHhqmcmrZuwHgw%40mail.gmail.com. -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to brewtus+unsubscr...@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/brewtus/541CA5F6-0CB4-4E67-AA0E-C096528E5A2B%40gmail.com.