It is not plastic it is ptfe tubing. Mine was too short after years of cutting to reseal the ends and I just got a spool on Amazon. The tubing on mine is 4mm id, 6mm od. Why replace with copper?
On Monday, February 3, 2025 at 9:16:56 PM UTC-8 Omar wrote: > Greetings all, > > Just picked up a used B3 and there's a plastic tube going from the steam > boiler to the brew boiler (the fill connection I think) - I'm not sure if > this is an original part on the B3 but in the B4 videos on WLL and the > parts diagram (here > <https://support.wholelattelove.com/hc/en-us/article_attachments/1500003280561>), > > it's a copper tube that connects the two boilers. > > Is it possible to replace the plastic hose with copper tubing? > > [image: WhatsApp Image 2025-02-04 at 00.11.00.jpeg] > > There's also a magnetic cap on the B4 that sits on the brew boiler (they > say it's used to reduce lime buildup) and it's not on my B3 - can I just > stick a magnet there? > > Thanks again! -- You received this message because you are subscribed to the Google Groups "Brewtus" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion visit https://groups.google.com/d/msgid/brewtus/274306f4-f6e9-46bc-a816-b71b3a70fbd5n%40googlegroups.com.
