[email protected] wrote:
>
> On Mon, May 4, 2009 at 4:06 PM, Jochen Hebbrecht
> <[email protected] <mailto:[email protected]>> wrote:
>
> I changed the configuration and restarted the networking daemon. I'm
> getting this output
>
> joc...@bacardi ~ $ sudo /etc/init.d/networking restart
> * Reconfiguring network
> interfaces...
> ioctl[SIOCGIFINDEX]: No such device
> Failed to open l2_packet connection for the bridge interface 'br0'
> wpa_supplicant: /sbin/wpa_supplicant daemon failed to start
> run-parts: /etc/network/if-pre-up.d/wpasupplicant exited with return
> code 1
>
> Waiting for br0 to get ready (MAXWAIT is 32 seconds).
>
>
> Surely things are getting run in the wrong order.
>
> First, the bridge should be created.
> Then, the interfaces should be configured, joined to the bridge, and
> brought up.
> Then wpa_supplicant should run.
> After wpa_supplicant associates to the wireless access point, then dhcp
> should succeed.
>
> It seems like ubuntu's network scripts don't create the bridge until too
> late.
I agree with Richard.
Jochen, can you please try the following configuration (step #5 in my
previous e-mail) ?
#auto eth0
iface eth0 inet manual
#auto eth1
iface eth1 inet manual
auto br0
iface br0 inet dhcp
bridge_ports eth0 eth1
# the wpa-iface option is expected to instruct wpa_supplicant
# to setup the wifi link using eth1 instead of br0.
wpa-iface eth1
wpa-driver wext
wpa-ssid ##SSID##
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk ##PSK KEY##
# The wpa-bridge option is expected to instruct wpa_supplicant
# to listen on br0 instead of eth1.
wpa-bridge br0
And if this fail, please try the same configuration, without the
wpa-bridge option.
If both fail, please provide the list of files in /etc/network/if*/*.
Nicolas.
_______________________________________________
Bridge mailing list
[email protected]
https://lists.linux-foundation.org/mailman/listinfo/bridge
