Shawn Delaney schreef: > In the documentation I've seen so far a bridge is created with no IP address > for its enslaved interfaces and optionally with an IP address on the bridge > interface. For example, I create a bridge like so: > > brctl addbr br0 > brctl addif br0 eth0 > brctl addif br0 eth1 > > ifconfig eth0 0.0.0.0 > ifconfig eth1 0.0.0.0 > ifconfig br0 10.0.0.10 netmask 255.255.0.0 > > > This works fine. However if I do the following: > > ifconfig eth0 10.0.0.10 netmask 255.255.0.0 > ifconfig eth1 10.1.0.10 netmask 255.255.0.0 > ifconfig br0 0.0.0.0 > > Sounds like you want to make a brouter. You can use the ebtables broute table for that. See: http://ebtables.sourceforge.net/examples/basic.html#ex_brouter
cheers, Bart -- Bart De Schuymer www.artinalgorithms.be _______________________________________________ Bridge mailing list [email protected] https://lists.linux-foundation.org/mailman/listinfo/bridge
