Joakim Tjernlund wrote:
[...]
>
> Sorry but I could not find that discussion but it doesn't sound as
> what I was after. Basically I want the eth0 I/F keeping its IP address
> and take over the roll of the br0 I/F when it has an IP address.
Can you please try to explain the reason why you would like the bridge members
to have an IP,
instead of the br0 interface ?
What is the expected result ? Until now, you described a solution (having an IP
address on the
bridge members), but not the real problem you are trying to solve.
Basically, a bridge is a level 2 link between the bridge members. An IP address
is not required for
the bridge to provide L2 connectivity between the members. But, if the host
hosting the bridge need
to be able to send/receive packets to/from bridge members, then it use the br0
interface. Using br0
to send packets let the bridge decide on which members to forward each packets.
Using br0 to receive
packets allow you not to listen on every members at the same time. For this
reason, it is normal to
give an IP address to th br0 interface and to leave the bridge members without
any IP address.
HTH
Nicolas.
_______________________________________________
Bridge mailing list
[email protected]
https://lists.linux-foundation.org/mailman/listinfo/bridge
