On Wed, 13 Oct 2010 11:27:18 -0400 Mark Liggett <[email protected]> wrote:
> Hi everyone, > > I'm using Ethernet bridging on an up-to-date F13 system. I've created a > bridge adapter br0 and added eth2 and eth3 to it. Everything works as > expected for a short time before the 2 Ethernet cards used in the bridge > start reporting millions of errors. I confirmed this is the case on 2 > separate systems (although both systems use Intel NICs). To try to resolve > this I've: > > - Compiled and installed the latest Intel igb driver 2.3.4 > - Installed the latest Fedora kernel 2.6.34.7-56 > - Uninstalled the standard bridge-utils 1.2-9, before compiling and > installing version 1.4 > > I've pastebin'd the system config here: http://pastebin.ca/1960777 > > You can see the errors listed on eth2 and eth3. I've tried both setting the > bridge up using /etc/sysconfig/network-scripts as well as manually (using > brctl and ifconfig). > > My bridge/Ethernet interface configs are listed here: > http://pastebin.ca/1960790 > > Any suggestions would be greatly appreciated. > > Thanks, > > Mark Something is wrong with those interfaces. Get the ethtool statistics and other data and report it to the e1000 list. -- _______________________________________________ Bridge mailing list [email protected] https://lists.linux-foundation.org/mailman/listinfo/bridge
