Hello,
I'm trying to configure an Ubuntu server with 2 wired interfaces set as a
bridge and I want a radius authentication on each interfaces.
I'm able to set my configuration files to have a bridge between the 2
interfaces without authentication.
I'm able to set my configuration files to have an authentication on each
interfaces but without the bridge.
I don't know how to configure my files to have both authentication and
bridge !
Can someone help me ?
I give you my /etc/network/interface not working :
*# loopback interface**
auto lo**
iface lo inet loopback**
# network interface**
auto eth0**
iface eth0 inet manual**
**
auto eth1**
iface eth1 inet manual**
**
auto br0**
iface br0 inet dhcp**
bridge_ports eth0 eth1**
**
wpa-iface eth0 #*How to add eth1 ? If I add a new line it's not working
*wpa-bridge br0**
wpa-driver wired**
wpa-conf /etc/wpa_supplicant/wired.conf*
The wired.conf file for information :
*ctrl_interface=/var/run/wpa_supplicant**
ctrl_interface_group=0**
ap_scan=0**
#On configure la re-authentification rapide pour protocoles EAP**
#fast_reauth=1**
**
network={**
ssid="lan"**
key_mgmt=IEEE8021X**
eapol_flags=0**
eap=MD5**
identity="labo"**
password="test"**
}*
With this configuration, it's working if my interface eth0 is connected, but
it's not working if it's eth1 which is connected.
Could you tell me what I need to add in my configuration file ?
Thanks for your help.
Sebastien.
_______________________________________________
Bridge mailing list
[email protected]
https://lists.linux-foundation.org/mailman/listinfo/bridge
