To integrate MRP into the bridge, first the bridge needs to be aware of ports that are part of an MRP ring and which rings are on the bridge. Therefore extend bridge interface with the following: - add new flag(BR_MPP_AWARE) to the net bridge ports, this bit will be set when the port is added to an MRP instance. In this way it knows if the frame was received on MRP ring port - add new flag(BR_MRP_LOST_CONT) to the net bridge ports, this bit will be set when the port lost the continuity of MRP Test frames. - add a list of MRP instances
Signed-off-by: Horatiu Vultur <[email protected]> --- include/linux/if_bridge.h | 2 ++ net/bridge/br_private.h | 4 ++++ 2 files changed, 6 insertions(+) diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h index 9e57c4411734..b3a8d3054af0 100644 --- a/include/linux/if_bridge.h +++ b/include/linux/if_bridge.h @@ -47,6 +47,8 @@ struct br_ip_list { #define BR_BCAST_FLOOD BIT(14) #define BR_NEIGH_SUPPRESS BIT(15) #define BR_ISOLATED BIT(16) +#define BR_MRP_AWARE BIT(17) +#define BR_MRP_LOST_CONT BIT(18) #define BR_DEFAULT_AGEING_TIME (300 * HZ) diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h index 1f97703a52ff..835a70f8d3ea 100644 --- a/net/bridge/br_private.h +++ b/net/bridge/br_private.h @@ -428,6 +428,10 @@ struct net_bridge { int offload_fwd_mark; #endif struct hlist_head fdb_list; + +#if IS_ENABLED(CONFIG_BRIDGE_MRP) + struct list_head __rcu mrp_list; +#endif }; struct br_input_skb_cb { -- 2.17.1
