On Sat, Mar 15, 2025 at 09:00:33PM +0100, Eric Woudstra wrote:
> Check conntrack bridge is functional in various vlan setups.
Only conntrack bridge support is tested here, patch 2/3 does not seem
to be covered :(
> Signed-off-by: Eric Woudstra <ericwo...@gmail.com>
> ---
> .../testing/selftests/net/netfilter/Makefile | 1 +
> .../net/netfilter/conntrack_bridge.sh | 176 ++++++++++++++++++
> 2 files changed, 177 insertions(+)
> create mode 100755 tools/testing/selftests/net/netfilter/conntrack_bridge.sh
>
> diff --git a/tools/testing/selftests/net/netfilter/Makefile
> b/tools/testing/selftests/net/netfilter/Makefile
> index ffe161fac8b5..bee403d423f5 100644
> --- a/tools/testing/selftests/net/netfilter/Makefile
> +++ b/tools/testing/selftests/net/netfilter/Makefile
> @@ -8,6 +8,7 @@ MNL_LDLIBS := $(shell $(HOSTPKG_CONFIG) --libs libmnl
> 2>/dev/null || echo -lmnl)
>
> TEST_PROGS := br_netfilter.sh bridge_brouter.sh
> TEST_PROGS += br_netfilter_queue.sh
> +TEST_PROGS += conntrack_bridge.sh
> TEST_PROGS += conntrack_dump_flush.sh
> TEST_PROGS += conntrack_icmp_related.sh
> TEST_PROGS += conntrack_ipip_mtu.sh
> diff --git a/tools/testing/selftests/net/netfilter/conntrack_bridge.sh
> b/tools/testing/selftests/net/netfilter/conntrack_bridge.sh
> new file mode 100755
> index 000000000000..806551ef8cc2
> --- /dev/null
> +++ b/tools/testing/selftests/net/netfilter/conntrack_bridge.sh
> @@ -0,0 +1,176 @@
> +#!/bin/bash
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Check conntrack bridge is functional in various vlan setups.
> +#
> +# Setup is:
> +#
> +# nsclient1 -> nsbr -> nsclient2
> +# ping nsclient2 from nsclient1, checking that conntrack established
> +# packets are seen.
> +#
> +
> +source lib.sh
> +
> +if ! nft --version > /dev/null 2>&1;then
> + echo "SKIP: Could not run test without nft tool"
> + exit $ksft_skip
> +fi
> +
> +cleanup() {
> + cleanup_all_ns
> +}
> +
> +trap cleanup EXIT
> +
> +setup_ns nsclient1 nsclient2 nsbr
> +
> +ret=0
> +
> +add_addr()
> +{
> + ns=$1
> + dev=$2
> + i=$3
> +
> + ip -net "$ns" link set "$dev" up
> + ip -net "$ns" addr add "192.168.1.$i/24" dev "$dev"
> + ip -net "$ns" addr add "dead:1::$i/64" dev "$dev" nodad
> + ip -net "$ns" route add default dev "$dev"
> +}
> +
> +del_addr()
> +{
> + ns=$1
> + dev=$2
> + i=$3
> +
> + ip -net "$ns" route del default dev "$dev"
> + ip -net "$ns" addr del "dead:1::$i/64" dev "$dev" nodad
> + ip -net "$ns" addr del "192.168.1.$i/24" dev "$dev"
> + ip -net "$ns" link set "$dev" down
> +}
> +
> +send_pings()
> +{
> + for ad in "$@"; do
> + if ! ip netns exec "$nsclient1" ping -c 1 -s 962 -q "$ad"
> >/dev/null; then
> + echo "ERROR: netns routing/connectivity broken to $ad"
> 1>&2
> + exit 1
> + fi
> + done
> +}
> +
> +check_counter()
> +{
> + ns=$1
> + name=$2
> + expect=$3
> + local lret=0
> +
> + if ! ip netns exec "$ns" nft list counter bridge filter "$name" | grep
> -q "$expect"; then
> + echo "ERROR: counter $name in $ns has unexpected value
> (expected $expect)" 1>&2
> + ip netns exec "$ns" nft list counter bridge filter "$name" 1>&2
> + lret=1
> + fi
> + ip netns exec "$ns" nft reset counters >/dev/null
> +
> + return $lret
> +}
> +
> +BR=br0
> +if ! ip -net "$nsbr" link add $BR type bridge; then
> + echo "SKIP: Can't create bridge $BR"
> + exit $ksft_skip
> +fi
> +
> +DEV=veth0
> +ip link add "$DEV" netns "$nsclient1" type veth peer name eth1 netns "$nsbr"
> +ip link add "$DEV" netns "$nsclient2" type veth peer name eth2 netns "$nsbr"
> +
> +ip -net "$nsbr" link set eth1 master $BR up
> +ip -net "$nsbr" link set eth2 master $BR up
> +ip -net "$nsbr" link set $BR up
> +
> +ip netns exec "$nsbr" nft -f - <<EOF
> +table bridge filter {
> + counter established { }
> + chain forward {
> + type filter hook forward priority 0; policy accept;
> + ct state "established" counter name "established"
> + }
> +}
> +EOF
> +
> +a=1;
> +for ns in "$nsclient1" "$nsclient2"; do
> + add_addr "$ns" "$DEV" $a
> + ((a++))
> +done
> +
> +send_pings "192.168.1.2" "dead:1::2"
> +expect="packets 2 bytes 2000"
> +if ! check_counter "$nsbr" "established" "$expect"; then
> + msg+="\nFAIL: without vlan, established packets not seen"
> + ret=1
> +fi
> +
> +a=1;
> +for ns in "$nsclient1" "$nsclient2"; do
> + del_addr "$ns" "$DEV" $a
> + ip -net "$ns" link add link "$DEV" name "$DEV.10" type vlan id 10
> + ip -net "$ns" link set "$DEV" up
> + add_addr "$ns" "$DEV.10" $a
> + ((a++))
> +done
> +
> +send_pings "192.168.1.2" "dead:1::2"
> +expect="packets 2 bytes 2000"
> +if ! check_counter "$nsbr" "established" "$expect"; then
> + msg+="\nFAIL: with single vlan, established packets not seen"
> + ret=1
> +fi
> +
> +a=1;
> +for ns in "$nsclient1" "$nsclient2"; do
> + del_addr "$ns" "$DEV.10" $a
> + ip -net "$ns" link add link "$DEV.10" name "$DEV.10.20" type vlan id 20
> + ip -net "$ns" link set "$DEV.10" up
> + add_addr "$ns" "$DEV.10.20" $a
> + ((a++))
> +done
> +
> +send_pings "192.168.1.2" "dead:1::2"
> +expect="packets 2 bytes 2008"
> +if ! check_counter "$nsbr" "established" "$expect"; then
> + msg+="\nFAIL: with double q vlan, established packets not seen"
> + ret=1
> +fi
> +
> +a=1;
> +for ns in "$nsclient1" "$nsclient2"; do
> + del_addr "$ns" "$DEV.10.20" $a
> + ip -net "$ns" link del "$DEV.10.20"
> + ip -net "$ns" link del "$DEV.10"
> + ip -net "$ns" link add link "$DEV" name "$DEV.10" type vlan id 10
> protocol 802.1ad
> + ip -net "$ns" link add link "$DEV.10" name "$DEV.10.20" type vlan id 20
> + ip -net "$ns" link set "$DEV.10" up
> + add_addr "$ns" "$DEV.10.20" $a
> + ((a++))
> +done
> +
> +send_pings "192.168.1.2" "dead:1::2"
> +expect="packets 2 bytes 2008"
> +if ! check_counter "$nsbr" "established" "$expect"; then
> + msg+="\nFAIL: with 802.1ad vlan, established packets not seen "
> + ret=1
> +fi
> +
> +if [ $ret -eq 0 ];then
> + echo "PASS: established packets seen in all cases"
> +else
> + echo -e "$msg"
> +fi
> +
> +exit $ret
> +
> --
> 2.47.1
>
