Hi, All:
I am tring to use STP function on bridge device that refer the
BRIDGE-STP-HOWTO. And I use PING program to test it from PC1 to
PC2. But the forward function is become too long when bridge topology
change.
How can I tuning the STP to make client connect to another again faster?
I have been use follow command. But it seen not this issue. Bcause, if I run
" arp -d " on PC1 and the reply will be immediately. Or if I run one ping
from
PC3 to PC2 (PC3 didn't have PC2 arp entry). The PC1 will also get reply
immediately.
Does any one know what's problem?
/usr/sbin/brctl setbridgeprio mybr 0
/usr/sbin/brctl sethello mybr 1
/usr/sbin/brctl setmaxage mybr 4
/usr/sbin/brctl setfd mybr 4
/usr/sbin/brctl stp mybr on
Two bridge machines are install with linux-2.4.26 and use the ebtables patch
(ebtables-brnf-6-vs-2.4.26).
Network environment:
PC1 --------- Bridge 1 ---- PC2
|----- Bridge 2 ---|
PC3 ----
Very thank for your help
Regards,
Matt.
_______________________________________________
Bridge mailing list
[EMAIL PROTECTED]
http://lists.osdl.org/mailman/listinfo/bridge
