On Mon, 10 Jan 2005 16:45:06 +0100
Gergely Madarasz <[EMAIL PROTECTED]> wrote:
> On Mon, Jan 10, 2005 at 10:05:56AM -0500, Neil Horman wrote:
> > Gergely Madarasz wrote:
> > >Hello,
> > >
> > >I've got a very strange problem. Lately I've been setting up my linux
> > >servers for network (layer2) redundancy with a bridge interface containing
> > >two ethernet interfaces connecting to two switches. So far I didn't have
> > >any problems with it, but now a very strange thing happens with a new
> > >server I'm installing. The server is an ibm x346 having two onboard
> > >BCM5721 cards, the switches are cisco 3550, and I've tested with kernel
> > >versions 2.6.10 and 2.4.28.
It could be the switch? Some switches require configuring the port as monitor
mode (othewise they do MAC filtering).
I have a machine with:
03:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit
Ethernet (rev 02)
Subsystem: IBM: Unknown device 026f
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 28
Memory at c0200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device.
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable
but haven't tried bridging with it.
_______________________________________________
Bridge mailing list
[email protected]
http://lists.osdl.org/mailman/listinfo/bridge
