On Wed, 28 Jan 2004 17:38:26 -0800 Josh Lehan <[EMAIL PROTECTED]> wrote:
> Stephen Hemminger wrote: > > > Probably not. What are you trying to do? Might to be bridge the > > physical LAN and do any filtering based on tag using bridge-filtering > > (ebtables). > > I also have a need to add the same physical port to multiple bridges, > but my reason is different. > > I have a block of static IP addresses, but instead of having a separate > routing subnet for the gateway, my gateway has been placed on one of my > own static IP addresses! So, I need to have a bridge in order to do > proper firewalling, since both filtered and unfiltered traffic must flow > on the same subnet. > > Here is my network: > > eth0 = to gateway, raw unfirewalled IP packets > (IP address is on the same subnet as the rest of my static IP addresses) > | br0 > eth1 = to the rest of my machines on my static IP addresses > > eth2 = additional machines on private IP addresses (via NAT) > (on a completely different subnet, using private IP addresses) > > I have successfully firewalled my other static IP addresses by bridging > eth0 and eth1 together into br0. This works beautifully. None of my > machines have connection problems, and they are being defended by a > firewall. > > However, for gaming purposes, I'd like to bridge eth1 and eth2 also > together. This is because non-IP protocols (such as IPX/SPX, used by > many games) are not routed across the subnets. > > What would be really neat is if I could filter by protocol: > IP on eth1 = bridge to eth0/eth1 > Non-IP on eth1 = bridge to eth1/eth2 > > I don't think the current bridging code supports this. > > A workaround would be to find (or write) a simple utility that listens > to all non-IP packets coming in on both eth1 and eth2, and blindly > echoes the raw packets onto the other interface, so that the two > interfaces effectively become bridged with regards to non-IP packets. > This would be all done in userspace, so as not to interfere with the > kernel bridging code. Does such a program already exist? > Put them all in one bridge and write filter rules (ebtables) to do what you want.
_______________________________________________ Bridge mailing list [email protected] http://lists.osdl.org/mailman/listinfo/bridge
