On Fri, 26 Aug 2005 17:56:16 +0800
Ryan McConigley <[EMAIL PROTECTED]> wrote:
>
> I have a question about bridges, vlans and switches. We had been
> using
> a bridge to provide filtering between our student labs and the main
> network. All the filtering does is check that a known IP matches a known
> MAC address, this stops students plugging in laptops and stealing an IP
> address. (And yes, we know about the MAC spoofing issues too) The
> connection was nice and simple, basically:
>
> [Main switch]-----<bridge firewall>-------[Lab
> Switch]
>
> And it was working fine. Then of course, earlier this year, we
> upgraded
> our network and the guy who did it created vlans so now we're bridging from
> Vlan_1 to Vlan_2 on seperate ports on the same switch.
>
> That has apparently been working fine as well, but when one of the uni
> network guys looked at it he freaked and started going on about the
> problems of arp broadcasts and he was insisting we replace it immediately,
> but of course, couldn't provide any suggestions as to how to replace
> it. Since we're in a university and things appeared to be working
> normally, I did what seemed natural... I ignored him. (Mainly because it
> was the middle of semester and changing things then is bad)
>
> Step forward a few months and here I am currently building two
> replacement
> firewalls, so I thought I'd ask the list about problems with bridging vlans
> on the same switch.
There are problems with some switches because they may not treat
VLAN's as real separate networks. The switch is really a bridge,
and if forwards broadcasts between VLAN's you will end up creating
a loop in your network:
[Switch] --->- VLAN1 ->- [ Bridge ]
---<- VLAN2 -<-
And the broadcast will ping pong forever. Spanning Tree would help,
but the Switch may or may not do STP, and the Bridge needs to have STP
turned on.
_______________________________________________
Bridge mailing list
[email protected]
https://lists.osdl.org/mailman/listinfo/bridge
