Hello all,
I am new to Linux Ethernet bridging. Let me first start with what I am
trying to achieve. Well you see - I am attempting to have 2 main
firewall running at the same time - one as a master and the other one as
a slave. Yes, I would like to make use of Ethernet bridging in this
scenario - as I understand it, all I need are two machines and STP
enabled. I am running Debian Stable/Sarge and have installed Kernel
2.6.8, and I am using brctl as my user space util, I also have ebtables
and iptables on the same machine (the slave) running fine and well. At
the moment I have the main firewall doing little then just a grandeur
network switch with iptables filtering on.
My slave machine is broken into 2 logical bridge devices, br0 (internal
network) with 2 ports and br1 (external network) with 4 ports. I needed
to give both IP addresses as I am forwarding packets from the internal
network (br0) though to the internal via (br1). This slave firewall
machine is doing mail-scanning and ftp/http proxying as well.
My problem exists when I attempt to plug in the slave machine into my
network - I assume that I am receiving masses of packets looping in our
network:
Jun 21 12:46:58 geminus kernel: eth4: Oversized Ethernet frame,
status 0118c600.
Jun 21 12:47:24 geminus kernel: eth0: received packet with own
address as source address
And sluggish tty response when entering into console.
I have attempted to enable STP on both network bridges and I am still
faced with the same scenario. I am either missing something crucial - as
it seems that BOTH seem to be trying to relay traffic...
+------------[Internet]
|
|-[router1]-|
|-[router2]-|
[Master Firewall]---------|-[router3]-|------------[Slave Firewall]
|-[router4]-|
|-[router5]-|
|
[internal network]--------+
I have attempted to assign different bridge priorities to both an yet I
am still having the same issues. Here are some configs of both machines.
-------------------[slave]--------------------
# The internal network interface
auto br0
iface br0 inet static
address 192.168.5.11
netmask 255.255.255.0
bridge_ports eth0 eth1
# The external network interface
auto br1
iface br1 inet static
address [public ip address]
netmask 255.255.0.0
bridge_ports eth2 eth3 eth4 eth5 eth6
#Using ip route2 to do policy based routing.
<<EOF
bridge name bridge id STP enabled interfaces
br0 8000.0008a17aaf17 yes eth0
eth1
br1 8000.000d88687d2c yes eth2
eth3
eth4
eth5
eth6
Bridge table: filter
Bridge chain: INPUT, entries: 2, policy: DROP
-p IPv4 -j ACCEPT
-p ARP -j ACCEPT
Bridge chain: FORWARD, entries: 2, policy: DROP
-p IPv4 -j ACCEPT
-p ARP -j ACCEPT
Bridge chain: OUTPUT, entries: 2, policy: DROP
-p IPv4 -j ACCEPT
-p ARP -j ACCEPT
-------------------[master]--------------------
### bridging interface
auto br0
iface br0 inet static
address 192.168.0.1
netmask 255.255.255.255
bridge_ports eth1 eth2 eth3 eth4 eth5
bridge_maxwait 3
post-up /sbin/ip address del dev br0 192.168.0.1/32
post-up /sbin/ip route add dev br0 via [public ip address] src
[public ip address]
post-up /sbin/ifconfig br0:1 192.168.5.1 netmask 255.255.255.0 up
pre-down /sbin/ip address flush dev br0
<<EOF
bridge name bridge id STP enabled interfaces
br0 0000.000d885348c4 yes eth1
eth2
eth3
eth4
eth5
Bridge table: filter
Bridge chain: INPUT, entries: 0, policy: ACCEPT
Bridge chain: FORWARD, entries: 0, policy: ACCEPT
Bridge chain: OUTPUT, entries: 0, policy: ACCEPT
---------------------------------------------------------------------
If there is more you need please ask me and I'll gladly post it.
--
Kind Regards
Etienne
_______________________________________________
Bridge mailing list
[email protected]
https://lists.osdl.org/mailman/listinfo/bridge
