On Tue, Jan 15, 2002 at 04:36:16PM -0600, Jeremy Sanders wrote:
> I tried to setup a firewall last night with one NIC. Let's leave > discussions about whether this is a good idea or not out of it :). I think it is.. :) > The internet router is a Cisco 2610 and it's ethernet interface is > configured for 10 full duplex. Once everything is setup I can ping the > bridge ip address and the box on the other side of the bridge from the > router. I can send 1500 byte pings with about 99% response. About 8 > packets out of 1000 do not get a reply. > > I am using > > kernel 2.4.17 > bridge netfilter patch for 2.4.17 > 802.1q patches for 3c59x and eepro100(tried each) > latest netfilter cvs patch-o-matic selections > > Any ideas? Does it also happen if you don't use bridging? Does it also happen if you don't use the netfilter patch? Any TX/RX errors on the cards or on the Cisco? cheers, Lennert _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
