Added this to the FAQ, thanks for your report.
On Mon, Feb 11, 2002 at 09:54:35AM -0800, Al Peak wrote: > I've found the root of my problem. 3C509B drivers > seem to get inserted into the kernel without correct > default initializations. On both machines which had > these, I found highly assymetric performance, and when > loaded with the full_duplex=1 option, symmetry was > maxed out at 10Mbps. The correct options, for anyone > who might be experiencing the same strangeness that I > previously described, is to load the 3c59x module with > "options=8 full_duplex=1" > > I now measure >90Mbps performance over the bridge > for file transfers, and around 93Mbps for memory > transfers using ttcp (I get between 91 and 94 Mbps > with no bridge). > > __________________________________________________ > Do You Yahoo!? > Send FREE Valentine eCards with Yahoo! Greetings! > http://greetings.yahoo.com > _______________________________________________ > Bridge mailing list > [EMAIL PROTECTED] > http://www.math.leidenuniv.nl/mailman/listinfo/bridge _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
