[Bridge] forward delay

[penny]

Hi everybody:   I'm trying to build a software Access Point , and using bridge utilities to connect the wired and wireless network... I find out that when I ping from wirelss client to wired host , the packet trip time always as slow as 15 sec , and then I find out that it is caused by bridge forward delay set to 15 sec default. I use   ./brctl setfd br0 0 , to disable the bridge forward delay, but the delay of 15 sec still exist.... I read the bridge information by  ./brctl showstp br0 and the content is below:   br0  bridge id  8000.00508bd07a8f  designated root 8000.000143e21429  root port     1   path cost   100  max age    20.00   bridge max age    20.00  hello time     2.00   bridge hello time    2.00  forward delay    15.00   bridge forward delay    0.00 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~   the " bridge forward delay" is change to 0.00 sec , but there still a " forward delay" set to 15 sec can anybody teach me how to disable the forward delay to 0 sec correctly....     thanks sincerely...                                                                                                                       from CL Kao  ageing time   300.00   gc interval     4.00  hello timer     0.00   tcn timer     0.00  topology change timer    0.00   gc timer     2.56  flags      eth0 (1)  port id  8001   state   forwarding  designated root 8000.000143e21429 path cost   100  designated bridge 8000.000143e21429 message age timer    0.97  designated port 802a   forward delay timer    0.00  designated cost    0   hold timer     0.00  flags      wlan0 (2)  port id  8002   state   forwarding  designated root 8000.000143e21429 path cost   100  designated bridge 8000.00508bd07a8f message age timer    0.00  designated port 8002   forward delay timer    0.00  designated cost  100   hold timer     0.97  flags