Hi, more detailed traces would be welcome.
cheers, Lennert On Thu, May 30, 2002 at 06:01:46PM -0700, pojen wrote: > Hi; > I have a project on MIPS embedded platform that using the 2.4.18 kernel. > There were two net devices on board and we wrote the device driver. > (The ethernet buildin CPU and eth0, eth1 share the same driver code) > Before I do the "nf-0.0.7 against 2.4.18" patch, everything went fine > including the firewall and NAT. > Here is the problem I hit: > > PC1------(eth1--brg0--eth0)-------PC0 > > After the bridge patched and before I applied firewall, > if I bridged eth0, eth1 and then ping, I could catch packages from PC0 and PC1 by >tcpdump. > But only the eth0 received the package replied from PC0. > The PC1 did reply but eth1 somehow did not know it. > If I only include ONE device on bridge, then not problem at all. > > It could be my network device driver problem. But how come only the eth1 got problem? > Any suggestions will appreciate. > > pojen _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
