I guess you should take this up with the tulip people or on linux-kernel, this doesn't seem bridge related.
On Mon, Jun 17, 2002 at 10:34:02AM +0800, ???? wrote: > Hi all: > First please forgive me for my poor english. I am very interesting at using >linux box as high performance router. I have searched a lot of maillists and found >that NAPI is a good answer for my problem. The network card is znyx-346Q(quard port >network card use dec21143 chip), I use linux2.4.18 and patch from >ftp://robur.slu.se/pub/Linux/net-development/NAPI/kernel/napi-patch-ank and the tulip >driver from >ftp://robur.slu.se/pub/Linux/net-development/NAPI/tulip/tulip-NAPI-011103.tar.gz . >Patching and compile is OK, but the znyx network card work abnormanly,when i ftp a >file from the linux box or use it as forwarding box , the network speed is extremly >slow(I use 100M switch). If I use 10M hub, everything seems OK. then I use the >original tulip driver including at the kernel, everything is alos OK either with 100M >switch or 10M hub. Does anybody used this cards, maybe there are some >auto-negotiation problem with this card? I also found somebody use DLINK DFE-570TX, >does this! c! > ard also has the same problem? > thanks a lot. > _______________________________________________ > Bridge mailing list > [EMAIL PROTECTED] > http://www.math.leidenuniv.nl/mailman/listinfo/bridge _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
