> Hi > > I'm thinking about using bridge to connect two unmanagement stupid > Switches as a trunk(too have more bandwith), > the problem is that a network loop would be created. > But after thinking about it I found a possible Solution(which I call > Network-Splitting): > > You make 2 bridges on one machnine, every bridge is connect two both > switches, but only the first lets broadcasts trought > and learns new mac adresses. The learned mac adresses a splited on > both bridges so does ca. 50% use bridge1 & ca. 50% bridge2 > bridge1 says says he knows only his 50% and so does also bridge2 > For every Switch it would look like beeing connected to 2 Switches. > > The problem is that i don't know if i have overseen any technical > problem and for this > a tool to delete & add mac adresses to the bridges mac table would be > needed. > > Please tell me if you think it is possible to do it? > > > greets > > Bastian Nominacher _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
