I am looking for away to use the bridge utils and code to allow any configuration of IP in my inside interface to be able to go out to the internet. SO basically, I have 2 interfaces, one hooked up to the internet connection (eth0) and one hooked up to an internal network(eth1) I would like to be able to plug in a laptop with any static IP information and get out to the internet. I know it can be done, I have purchased a router from a company that allows me to do it. I have snooped around the box and found that it uses BRCFG v0.4 but it has extra options such as:
brcfg PP x Enable(1) or Disable(0) IP Plug and Play brcfg IP x1.x1.x1.x1 x2.x2.x2.x2 Enter 2 DNS IP address brcfg PT x Enable(1) or Disable(0) PORTAL web site brcfg IT x.x.x.x Enter the PORTAL site IP address How would I make the bridge do this? There is no source code and they obviously wont release it to me. Can someone help me out, I would like to build my own bridge with this functionality. Thanks! Erich _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://www.math.leidenuniv.nl/mailman/listinfo/bridge
