about Ethernet bridging in Linux 2.4.19
Hello,
I've made a bridge between an Intel 802.3 onboard controller (eth0) and
a 802.11b 3Com Wi-Fi card (eth2). Everything works well : DHCP, Samba,
IP masquerading from that bridge interface to Internet's interface
(eth1)...
But I can't join computers connected on eth0 from eth2, and the
Ethernet-connected computers can't ping my PowerBook on �AirPort�
network.
The IP address of the server is 192.168.1.1, the wired-Ethernet segment
is from 1.2 to 1.9, the TiBook uses 1.10; the server masquerades the
traffic coming from intranet to eth1. I use Debian Woody on a SMP/i686
server.
Please note that dhcpd works very well on the bridge (some people
reported it wasn't ok on their server).
May you help me ?
Thanks
Damien Persohn [EMAIL PROTECTED]
__________________________________________________
Modem offert : 150,92 euros rembours�s sur le Pack eXtense de Wanadoo !
Haut d�bit � partir de 30 euros/mois : http://www.ifrance.com/_reloc/w
_______________________________________________
Bridge mailing list
[EMAIL PROTECTED]
http://www.math.leidenuniv.nl/mailman/listinfo/bridge
