Greetings,
I'm having an interesting problem with using bridging under 2.4.20, on
an IBM xSeries 305, using the onboard network interfaces (see below)
I can ping through the bridge (ICMP), but IP packets don't seem to get
through from other hosts. (eg ssh, and web connections don't complete.)
The interfaces are:
BROADCOM Corporation NetXtreme BCM5703
eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)]
(PCIX:100MHz:64-bit) 10/100/1000BaseT
(eth1 is similar)
The driver being used is: tg3 (from the default 2.4.20 kernel).
Has anyone else used bridging with this chipset with success?
Paul
--
Paul Schulz - Software Engineer [codito, ergo sum]
Foursticks Pty Ltd - 2/259 Glen Osmond Road, Frewville, SA 5063
Phone: +61 8 8338 5500 Fax: +61 8 8338 5511 Mobile: +61 401 981
301
Email: [EMAIL PROTECTED] Web: www.foursticks.com
_______________________________________________
Bridge mailing list
[EMAIL PROTECTED]
http://www.math.leidenuniv.nl/mailman/listinfo/bridge
