Hello, all.
I would like to set standby switch like this.
So if main switch is down, I would like to service with Standby Switch.
(using only Main switch and just connects with standby switch when normal state)
and I connected main switch with eth0, Sub switch with eth1,
and additionally connects STANDBY sWITCH with eth2
Main Switch Standby Switch | |
| |
---------------------------
|
Bridge Firewall
|
Sub Switch
Then, How can I change this script?
brctl addbr br0
brctl stp br0 off
brctl addif br0 eth0
brctl addif br0 eth1
ifconfig eth0 down
ifconfig eth1 down
ifconfig eth0 0.0.0.0 promisc up
ifconfig eth1 0.0.0.0 promisc up
ifconfig br0 211.1.1.1 promisc up
route add default gw 211.1.1.1
like this is possible and works well?
doesn't do loop?
brctl addbr br0
brctl stp br0 off
brctl addif br0 eth0
brctl addif br0 eth1
brctl addif br0 eth2
ifconfig eth0 down
ifconfig eth1 down
ifconfig eth2 down
ifconfig eth0 0.0.0.0 promisc up
ifconfig eth1 0.0.0.0 promisc up
ifconfig eth2 0.0.0.0 promisc up
ifconfig br0 211.1.1.1 promisc up
route add default gw 211.1.1.1
_________________________________________________________________
��ŭ�� ������ ������ ����ü ��Ȱ... ���� MSN Ŀ�´�Ƽ���� �����ϼ���! http://groups.msn.com/?pgmarket=ko-kr
_______________________________________________
Bridge mailing list
[EMAIL PROTECTED]
http://www.math.leidenuniv.nl/mailman/listinfo/bridge
