Hi all,
i am newbie to the ebtables and vlan.
Is possible with ebtables (or by somethik else) to map each vlan on one
physical interface to one IP address?
somethink like this:
i have two subinterfaces on eth1 - eth1.10 and eth1.11
each subinterface has the same IP address - 192.168.0.1
I would like when the traffic will go via eth1.10 interface it will be
translated to the unique public ip address (for ex. 111.111.0.1/24) and
when the traffic will go via eth1.11 it will be translated to another
public ip address (for ex. 111.111.1.1/24).
So question is - is possible to have two identical IP addresses, but
each on diffrent VLAN subinterface? And translate (like masquerading)
the traffic from this ip pools to the uniqe public address. Somethink
like mapping VLAN to the public addresses.
My topology:
192.168.0.0/24
LAN1 <-->(VLAN10)
\
catalist <-trunk-> (eht1.10,11)firewall(ipt/ebt/br/vlan)<->inet
/
LAN2 <-->(VLAN11)
192.168.0.0/24
tx
kolisko
--
---
Michal Kolesár
[EMAIL PROTECTED]
http://kolisko.penguin.cz
+420.777.225.297
Don't send me any attachment in Micro$oft (.DOC, .PPT) format please
Read http://www.fsf.org/philosophy/no-word-attachments.html
Preferable attachments: .PDF, .HTML, .TXT
Thanx for adding this text to Your signature
_______________________________________________
Bridge mailing list
[EMAIL PROTECTED]
http://www.math.leidenuniv.nl/mailman/listinfo/bridge
