Hello,

no, i wasen't able to ping the Bridge. But i have solved the problem. The have 
been some firewall rules that stoped the trafic to and from the bridge. If i 
make a iptables --flush and then call ipmasq, all will be right. I do not 
understand why this works this way, but it works. 
I think i will go to lern a liddle bit more about iptables to understand why 
this happens in this way.

thanks for your help

Aike

Am Dienstag, 10. Juni 2003 21:36 schrieb Leon Stankowski:
> Have you confirmed that all your routes on the bridge are set up
> appropriately?  Can you ping the bridge from each side?
>
> I'm assuming your network is 192.168.0.0/24 and that your external gateway
> is something like 192.168.0.1 so you should have the following routes:
>
> Destination    Gateway         Genmask         Flags Metric Ref Use Iface
> 192.168.0.0    *               255.255.255.0   U     0      0     0 br0
> 127.0.0.1      *               255.0.0.0       U     0      0     0 lo
> default        192.168.0.1     0.0.0.0         UG    0      0     0 br0
>
> Best,
> Leon
>
> -------Original message-------
> Date: Mon, 9 Jun 2003 12:37:07 +0200
> From: Aike Terjung <[EMAIL PROTECTED]>
> Subject: [Bridge] can not ping into the network from the bridge
> To: [EMAIL PROTECTED]
> Message-ID: <[EMAIL PROTECTED]>
> Content-Type: text/plain;  charset="iso-8859-1"
>
> Hello,
>
> ich have some problems with the bridging function. I had build a new Kernel
> with bridging. The bridge should connect a wlan to a normal wierd ethernet.
> i
> have done the following:
>
> brctl addbr br0
> brctl addif br0 eth0
> brctl addif br0 wlan0
> ifconfig eth0 0.0.0.0
> ifconfig wlan0 0.0.0.0
> ifconfig br0 192.168.0.10 up
>
> after that, the bridge itself seens to work, i am able to ping from a
>  Computer in the Wlan to a computer in the Wired-lan, ok. But the computer
>  with the bridge shuld be the gateway, mailserver e.t.c. for the bridged
>  Network, and it is no more possible to ping from it to hosts in the
>  Networks. I always get a "send to: Operation is not permitted" error
>  message.
>
> can anybody say me what i am doing wrong?
>
> thanks verry much
>
> Aike Terjung
>
> _______________________________________________
> Bridge mailing list
> [EMAIL PROTECTED]
> http://www.math.leidenuniv.nl/mailman/listinfo/bridge

_______________________________________________
Bridge mailing list
[EMAIL PROTECTED]
http://www.math.leidenuniv.nl/mailman/listinfo/bridge

Reply via email to