hello, all of users:
I tested zaphfc under voyage-linux, which is debain based and kernel is 2.6.23.
i run t under normal motherboard, it is no problem, but i move it under PC
engines 2c2. it has a critical problem. most of time, loading zaphfc will
cause system down, sometimes, it can load with asterisk, but i can not make
calls. two port and four port cards are no problem.
------------my test tools: -------------------
bristuff-0.4.0-RC3b
debian voyage-linux with kernel 2.6.23
PC engines alix 2c2
---------------------------------------------------
Dmesg----------------------------------
zaphfc: 1 hfc-pci card(s) in this box.
Registered tone zone 3 (Netherlands)
zaphfc: card 0 layer 1 state = F4
zaphfc[0]: b channel buffer underrun: 0, 0
zaphfc[0]: b channel buffer overflow: 24, 24
zaphfc[0]: b channel buffer overflow: 450, 450
zaphfc[0]: tx sync changed: 16, 0
zaphfc: card 0 layer 1 state = F5
zaphfc: card 0 layer 1 state = F6
zaphfc: card 0 layer 1 state = F7
zaphfc: card 0 layer 1 state = F8
zaphfc: card 0 layer 1 state = F3
zaphfc: card 0 layer 1 state = F4
zaphfc: card 0 layer 1 state = F5
zaphfc: card 0 layer 1 state = F8
zaphfc: card 0 layer 1 state = F8
zaphfc: card 0 layer 1 state = F8
zaphfc: card 0 layer 1 state = F8
zaphfc: card 0 layer 1 state = F8
zaphfc: card 0 layer 1 state = F8
zaphfc: card 0 layer 1 state = F8
zaphfc: card 0 layer 1 state = F8
zaphfc: card 0 layer 1 state = F6
zaphfc: card 0 layer 1 state = F7
ttyS0: 1 input overrun(s)
zaphfc: card 0 layer 1 state = F8
zaphfc: card 0 layer 1 state = F3
zaphfc: card 0 layer 1 state = F4
zaphfc: card 0 layer 1 state = F5
zaphfc: card 0 layer 1 state = F7
vi[3385]: segfault at 08083000 eip 080497a2 esp bfbd7f40 error 6
anyone has idea for that?
thanks!
zhu
---------------------------------
雅虎邮箱，您的终生邮箱！_______________________________________________
Bristuff-users mailing list
[email protected]
http://lists.three-dimensional.net/mailman/listinfo/bristuff-users
