hello,
i am using bristuff-0.4.0-RC3, centos 5and libpri-1.4.3 and hardware is PC
engines Alix 2c2 with AMD Geode LX800.
bri intense debug span 1 show:
--------------------------------------------------------
< [ fe ff 03 0f 00 00 06 87 ]
1
< Unnumbered frame:
1 < SAPI: 63 C/R: 1 EA: 0
< TEI: 127 EA: 1
1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
< 5 bytes of data
1 received TEI remove TEI = 67
1 Sending TEI Request ri=2853
1
> [ fc ff 03 0f 0b 25 01 ff ]
1
> Unnumbered frame:
1 > SAPI: 63 C/R: 0 EA: 0
> TEI: 127 EA: 1
1 > M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
> 5 bytes of data
1
< [ fe ff 03 0f 0b 25 02 87 ]
1
< Unnumbered frame:
1 < SAPI: 63 C/R: 1 EA: 0
< TEI: 127 EA: 1
1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
< 5 bytes of data
1 received TEI assign TEI = 67 ri=2853
1 Sending Set Asynchronous Balanced Mode Extended
1
> [ 00 87 7f ]
1
> Unnumbered frame:
1 > SAPI: 00 C/R: 0 EA: 0
> TEI: 067 EA: 1
1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of data
1 q921.c:534 q921_send_sabme: q921_state now is Q921_AWAITING_ESTABLISH
1
< [ 00 87 73 ]
1
< Unnumbered frame:
1 < SAPI: 00 C/R: 0 EA: 0
< TEI: 067 EA: 1
1 < M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]
< 0 bytes of data
1 -- Got UA from network peer Link up.
1 -- Restarting T203 counter
== Primary D-Channel on span 1 up
1
< [ 00 87 01 03 ]
1
< Supervisory frame:
1 < SAPI: 00 C/R: 0 EA: 0
< TEI: 067 EA: 1
1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 001 P/F: 1
< 0 bytes of data
[Aug 21 09:58:08] WARNING[6637]: chan_zap.c:8780 zt_pri_error: 1 ACK received
for '1' outside of window of '0' to '0', restarting
1 Sending Set Asynchronous Balanced Mode Extended
1
> [ 00 87 7f ]
1
> Unnumbered frame:
1 > SAPI: 00 C/R: 0 EA: 0
> TEI: 067 EA: 1
1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode
extended) ]
> 0 bytes of data
1 q921.c:534 q921_send_sabme: q921_state now is Q921_AWAITING_ESTABLISH
== Primary D-Channel on span 1 down
1
< [ 02 87 7f ]
1
< Unnumbered frame:
1 < SAPI: 00 C/R: 1 EA: 0
< TEI: 067 EA: 1
1 < M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode
extended) ]
< 0 bytes of data
1 -- Got SABME from network peer.
1 Sending Unnumbered Acknowledgement
1
> [ 02 87 73 ]
1
> Unnumbered frame:
1 > SAPI: 00 C/R: 1 EA: 0
> TEI: 067 EA: 1
1 > M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ]
> 0 bytes of data
1 -- Restarting T203 counter
== Primary D-Channel on span 1 up
== Primary D-Channel on span 1 up
----------------------------------------
*CLI> bri intense debug span 1
Enabled EXTENSIVE debugging on span 1
*CLI> 1 Sending TEI Request ri=8815
1
> [ fc ff 03 0f 22 6f 01 ff ]
1
> Unnumbered frame:
1 > SAPI: 63 C/R: 0 EA: 0
> TEI: 127 EA: 1
1 > M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
> 5 bytes of data
1 Sending TEI verify tei=127
1
> [ fc ff 03 0f 00 00 07 ff ]
1
> Unnumbered frame:
1 > SAPI: 63 C/R: 0 EA: 0
> TEI: 127 EA: 1
1 > M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ]
> 5 bytes of data
----------------------------------------------------
any idea for that?
thanks!
zhu
---------------------------------
雅虎邮箱，您的终生邮箱！_______________________________________________
Bristuff-users mailing list
[email protected]
http://lists.three-dimensional.net/mailman/listinfo/bristuff-users
