Hello Olivier,
>> Again a posting to the "cause 34" problems. I can reproduce my >> problem here. Asterisk with 2 B-channels (Zap/g1) > do you mean, with a single BRI port ? Yes single BRI, so 2 B-channels. >> : >> - SIP-phone dials out on first channel, all ok (SIP/10 dials >> Zap/g1/xxx) > ok >> >> - another call comes in on second channel, Asterisk tries to connect >> that call to a mobile phone (Zap/2-1 dials Zap/g1/xxxx), but fails >> cause there is no free zap-channel > Do you mean another call was started before this one ? > At that time, I'm counting 1+1=2 calls which should fit with a single BRI > port While SIP/10 is one phone (using Zap/1 to dial out) another call comes in on the second B-channel. Asterisk tries to connect this call to another external number, but has no free Zap channel. > You must see "cause 34" message, then, right ? Right. > If one of those 2 previous calls is stopped, do you still get "cause 34" > when you're trying to call again ? After all calls are hung up (SIP/10 on Zap/1 and the incoming call on Zap/2) Zap/2 is busy. "zap show channel 2" output: "PRI Flags: Call" Zap/2 is unusable from now on until you restart Asterisk. After a restart you have with "zap show channel 2" the output "PRI Flags: " (so no "Call"). Best regards, Gunnar Schaller _______________________________________________ Bristuff-users mailing list [email protected] http://lists.three-dimensional.net/mailman/listinfo/bristuff-users
