Revision: 41167
http://brlcad.svn.sourceforge.net/brlcad/?rev=41167&view=rev
Author: brlcad
Date: 2010-10-29 06:36:42 +0000 (Fri, 29 Oct 2010)
Log Message:
-----------
quell warnings, mostly unused.
Modified Paths:
--------------
brlcad/trunk/src/conv/step/Axis1Placement.cpp
brlcad/trunk/src/conv/step/Axis1Placement.h
brlcad/trunk/src/conv/step/Axis2Placement3D.cpp
brlcad/trunk/src/conv/step/Loop.cpp
brlcad/trunk/src/conv/step/MassUnit.cpp
brlcad/trunk/src/conv/step/OpenNurbsInterfaces.cpp
brlcad/trunk/src/conv/step/PullbackCurve.cpp
brlcad/trunk/src/conv/step/RationalBSplineSurface.cpp
Modified: brlcad/trunk/src/conv/step/Axis1Placement.cpp
===================================================================
--- brlcad/trunk/src/conv/step/Axis1Placement.cpp 2010-10-29 06:35:31 UTC
(rev 41166)
+++ brlcad/trunk/src/conv/step/Axis1Placement.cpp 2010-10-29 06:36:42 UTC
(rev 41167)
@@ -64,7 +64,7 @@
}
const double *
-Axis1Placement::GetAxis(int i) {
+Axis1Placement::GetAxis() {
return z;
}
Modified: brlcad/trunk/src/conv/step/Axis1Placement.h
===================================================================
--- brlcad/trunk/src/conv/step/Axis1Placement.h 2010-10-29 06:35:31 UTC (rev
41166)
+++ brlcad/trunk/src/conv/step/Axis1Placement.h 2010-10-29 06:36:42 UTC (rev
41167)
@@ -46,7 +46,7 @@
Axis1Placement();
virtual ~Axis1Placement();
Axis1Placement(STEPWrapper *sw,int step_id);
- const double *GetAxis(int i);
+ const double *GetAxis();
virtual const double *GetOrigin();
virtual const double *GetNormal();
virtual const double *GetXAxis();
Modified: brlcad/trunk/src/conv/step/Axis2Placement3D.cpp
===================================================================
--- brlcad/trunk/src/conv/step/Axis2Placement3D.cpp 2010-10-29 06:35:31 UTC
(rev 41166)
+++ brlcad/trunk/src/conv/step/Axis2Placement3D.cpp 2010-10-29 06:36:42 UTC
(rev 41167)
@@ -271,7 +271,7 @@
}
bool
-Axis2Placement3D::LoadONBrep(ON_Brep *brep)
+Axis2Placement3D::LoadONBrep(ON_Brep *UNUSED(brep))
{
//TODO: check other axis2placement3d usage notice being loaded from
advanced brep in some instances
//std::cerr << "Error: ::LoadONBrep(ON_Brep *brep<" << std::hex << brep
<< ">) not implemented for " << entityname << std::endl;
Modified: brlcad/trunk/src/conv/step/Loop.cpp
===================================================================
--- brlcad/trunk/src/conv/step/Loop.cpp 2010-10-29 06:35:31 UTC (rev 41166)
+++ brlcad/trunk/src/conv/step/Loop.cpp 2010-10-29 06:36:42 UTC (rev 41167)
@@ -89,7 +89,7 @@
}
ON_BoundingBox *
-Loop::GetEdgeBounds(ON_Brep *brep) {
+Loop::GetEdgeBounds(ON_Brep *UNUSED(brep)) {
return NULL;
}
Modified: brlcad/trunk/src/conv/step/MassUnit.cpp
===================================================================
--- brlcad/trunk/src/conv/step/MassUnit.cpp 2010-10-29 06:35:31 UTC (rev
41166)
+++ brlcad/trunk/src/conv/step/MassUnit.cpp 2010-10-29 06:36:42 UTC (rev
41167)
@@ -54,8 +54,10 @@
// load base class attributes
if ( !NamedUnit::Load(step,sse) ) {
- ERROR( CLASSNAME << ":Error loading base class ::Unit." );
- return false;
+ std::string err = CLASSNAME;
+ err += ":Error loading base class ::Unit.";
+ ERROR(err);
+ return false;
}
return true;
Modified: brlcad/trunk/src/conv/step/OpenNurbsInterfaces.cpp
===================================================================
--- brlcad/trunk/src/conv/step/OpenNurbsInterfaces.cpp 2010-10-29 06:35:31 UTC
(rev 41166)
+++ brlcad/trunk/src/conv/step/OpenNurbsInterfaces.cpp 2010-10-29 06:36:42 UTC
(rev 41167)
@@ -844,7 +844,7 @@
void
-Point::AddVertex(ON_Brep *brep)
+Point::AddVertex(ON_Brep *UNUSED(brep))
{
std::cerr << "Warning: " << entityname << "::AddVertex() should be
overridden by parent class." << std::endl;
}
@@ -881,6 +881,8 @@
}
} else if (num_control_points > 2) {
ON_NurbsCurve* c = ON_NurbsCurve::New(3, false, degree + 1,
num_control_points);
+ /* FIXME: do something with c */
+ delete c;
} else {
std::cerr << "Error: " << entityname << "::LoadONBrep() - Error
loading polyLine." << std::endl;
}
@@ -927,7 +929,6 @@
std::cerr << "Error: " << entityname << "::LoadONBrep() - Error
loading openNURBS brep." << std::endl;
return false;
}
- ON_BrepFace& face = brep->m_F[GetONId()];
cnt++;
}
return true;
@@ -2167,7 +2168,6 @@
double fd = focal_dist * LocalUnits::length;
ON_3dPoint focus = center + fd * xaxis;
ON_3dPoint directrix = center - fd * xaxis;
- double eccentricity = 1.0; // for parabola eccentricity is always 1.0
ON_3dPoint pnt1;
ON_3dPoint pnt2;
@@ -2462,7 +2462,8 @@
int trimCurve = brep->m_C2.Count();
brep->m_C2.Append(c2d);
- ON_BrepTrim& trim =
brep->NewSingularTrim(brep->m_V[loop_vertex->GetONId()], loop, iso, trimCurve);
+ (void)brep->NewSingularTrim(brep->m_V[loop_vertex->GetONId()], loop, iso,
trimCurve);
+ /* FIXME: do something with this trim */
return true;
}
Modified: brlcad/trunk/src/conv/step/PullbackCurve.cpp
===================================================================
--- brlcad/trunk/src/conv/step/PullbackCurve.cpp 2010-10-29 06:35:31 UTC
(rev 41166)
+++ brlcad/trunk/src/conv/step/PullbackCurve.cpp 2010-10-29 06:36:42 UTC
(rev 41167)
@@ -111,7 +111,7 @@
void
-brep_newton_iterate(const ON_Surface* surf, plane_ray& pr, pt2d_t R,
ON_3dVector& su, ON_3dVector& sv, pt2d_t uv, pt2d_t out_uv)
+brep_newton_iterate(const ON_Surface* UNUSED(surf), plane_ray& pr, pt2d_t R,
ON_3dVector& su, ON_3dVector& sv, pt2d_t uv, pt2d_t out_uv)
{
mat2d_t jacob = { VDOT(pr.n1, ((fastf_t*)su)), VDOT(pr.n1, ((fastf_t*)sv)),
VDOT(pr.n2, ((fastf_t*)su)), VDOT(pr.n2, ((fastf_t*)sv))
};
@@ -748,8 +748,8 @@
ON_Curve*
test1_pullback_curve(const brlcad::SurfaceTree* surfacetree,
const ON_Curve* curve,
- double tolerance,
- double flatness)
+ double UNUSED(tolerance),
+ double UNUSED(flatness))
{
ON_NurbsCurve* orig = curve->NurbsCurve();
bool isRational = false;
@@ -1009,7 +1009,7 @@
ON_Curve*
-refit_edge(const ON_BrepEdge* edge, double tolerance)
+refit_edge(const ON_BrepEdge* edge, double UNUSED(tolerance))
{
double edge_tolerance = 0.01;
ON_Brep *brep = edge->Brep();
@@ -1971,8 +1971,6 @@
bool
check_pullback_data(std::list<PBCData*> &pbcs)
{
- bool resolvable = true;
- bool resolved = false;
std::list<PBCData*>::iterator d = pbcs.begin();
//TODO: remove debugging code
Modified: brlcad/trunk/src/conv/step/RationalBSplineSurface.cpp
===================================================================
--- brlcad/trunk/src/conv/step/RationalBSplineSurface.cpp 2010-10-29
06:35:31 UTC (rev 41166)
+++ brlcad/trunk/src/conv/step/RationalBSplineSurface.cpp 2010-10-29
06:36:42 UTC (rev 41167)
@@ -67,8 +67,6 @@
// the actual entity and not a complex/supertype parent
sse = step->getEntity(sse,ENTITYNAME);
- SdaiRational_b_spline_surface *rbs =
(SdaiRational_b_spline_surface*)sse;
-
if (weights_data.empty()) {
SCLstring attrval;
STEPattribute *attr = step->getAttribute(sse,"weights_data");
This was sent by the SourceForge.net collaborative development platform, the
world's largest Open Source development site.
------------------------------------------------------------------------------
Nokia and AT&T present the 2010 Calling All Innovators-North America contest
Create new apps & games for the Nokia N8 for consumers in U.S. and Canada
$10 million total in prizes - $4M cash, 500 devices, nearly $6M in marketing
Develop with Nokia Qt SDK, Web Runtime, or Java and Publish to Ovi Store
http://p.sf.net/sfu/nokia-dev2dev
_______________________________________________
BRL-CAD Source Commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/brlcad-commits
