Revision: 45495
http://brlcad.svn.sourceforge.net/brlcad/?rev=45495&view=rev
Author: bhinesley
Date: 2011-07-14 19:38:16 +0000 (Thu, 14 Jul 2011)
Log Message:
-----------
remove trailing ws
Modified Paths:
--------------
brlcad/trunk/src/libged/edit.c
Modified: brlcad/trunk/src/libged/edit.c
===================================================================
--- brlcad/trunk/src/libged/edit.c 2011-07-14 16:34:48 UTC (rev 45494)
+++ brlcad/trunk/src/libged/edit.c 2011-07-14 19:38:16 UTC (rev 45495)
@@ -33,7 +33,7 @@
*
* ARGS:
* see manual for given COMMAND_NAME
- *
+ *
* DESCRIPTION
* Used to change objects through the use of subcommands.
*
@@ -53,7 +53,7 @@
* *OBJECT:
* [PATH/]OBJECT [OFFSET_DIST]
* [PATH/]OBJECT [x [y [z]]]
- *
+ *
* *POS:
* {x [y [z]]} | {[-x {x | X_OBJ}] [-y {y | Y_OBJ}]
* [-z {z | Z_OBJ}]}
@@ -71,11 +71,11 @@
* If FROM is "-k .", then each individual [PATH/]OBJECT argument
* uses its own bounding box center (or natural origin if
* "-n -k ." is used). Likewise, if TO is "-a ." or "-n -a ."
- *
+ *
* FROM_POS and TO_POS represent 3d points in "x y z"
* coordinates. To specify one or more specific axis while
* ignoring the others, the options "-x x", "-y y", "-z z" may be
- * used as FROM_POS or TO_POS.
+ * used as FROM_POS or TO_POS.
*
* OPTIONS
* -n FROM_OBJECT | TO_OBJECT
@@ -100,18 +100,18 @@
*
*
* VISUAL EXAMPLE:
- * translate -n -k rcc.s -a sph.s table.c/box.c
- *
+ * translate -n -k rcc.s -a sph.s table.c/box.c
+ *
* Move the instance of box.c in table.c from the natural origin
* of rcc.s to the bounding box center of sph.s:
- *
- * |.| <=keypoint: natural origin of rcc.s
- *
- * o <= center of sph.2
- * [] <=box.c start
- *
- * [] <=box.c moved
- *
+ *
+ * |.| <=keypoint: natural origin of rcc.s
+ *
+ * o <= center of sph.2
+ * [] <=box.c start
+ *
+ * [] <=box.c moved
+ *
* EXAMPLES
*
* # move all instances of sph.s to x=1, y=2, z=3
@@ -122,7 +122,7 @@
* translate -k sph.s -a 1 2 3 sph.s
* translate -k . -a 1 2 3 sph.s
*
- * # A very practical use of
+ * # A very practical use of
* translate -k . -a . -x sph2.s sph1.s
*
* # move all instances of sph.s from a point 5 units above
@@ -176,14 +176,14 @@
* # move all sph.s from the bounding box center of sph.s to
* # the natural origin of sph.s
* translate -k sph.s -n -a sph.s sph.s
- *
+ *
* # these all have the same effect as above
* translate -n -a . sph.s
* translate -k . -n -a . sph.s
*
* # move all instances of bowl.c, from sph.s's bounding
* # box center to y=5, without changing the x and z coodinates.
- * translate -k sph.s -a -y 5 bowl.c
+ * translate -k sph.s -a -y 5 bowl.c
*
* # move instance of two.c, from instance of sph.s's
* # matrix-modified natural origin to x=5
@@ -205,7 +205,7 @@
* translate -k sph.s -a sph.s sph.s
* translate -n -k . -n -a . sph.s
* translate -n -k sph.s -n -a sph.s sph.s
- *
+ *
* # center sph1.s and sph2.s on natural origin of rcc.s
* translate -k . -n -a rcc.s sph1.s sph2.s
*
@@ -216,17 +216,17 @@
*
* # move each of sph.s, sph2.s and sph3.s a relative x+5
* translate -k . -r 5 sph.s sph2.s sph3.s
- *
+ *
* # same as above
* translate -n -k . -r 5 sph.s sph2.s sph3.s
*
* # move sph.s to a point z+10 above bounding box center of
* # /sph2.s
* translate -k sph2.s -r -z 10 sph.s
- *
+ *
* # move the bounding box center of all instances of sph.s
* # to the natural origin of rcc.s, and move sph2.s from
- * # the bounding box center of sph.s to the natural origin of
+ * # the bounding box center of sph.s to the natural origin of
* # rcc.s (both sph.s and sph2.s stay the same relative distance
* # from each other; they have shifted together)
* translate -n -a rcc.s sph.s sph2.s
@@ -243,7 +243,7 @@
* translate -k -x 93.2 -a -x -41.7 one.c/two.c
* translate -k 93.2 0 0 -a -41.7 0 0 one.c/two.c
* translate -k 93.2 21 32 -a -41.7 21 32 one.c/two.c
- *
+ *
* # same result as above, using a relative distance
* translate -134.9 one.c/two.c
* translate -r -134.9 one.c/two.c
@@ -272,7 +272,7 @@
* *OBJECT:
* [PATH/]OBJECT [OFFSET_DIST]
* [PATH/]OBJECT [x [y [z]]]
- *
+ *
* *POS:
* {x [y [z]]} | {[-x {x | X_OBJECT}] [-y {y | Y_OBJECT}]
* [-z {z | Z_OBJECT}]}
@@ -282,7 +282,7 @@
* combination objects. OBJECTs rotate around CENTER at ANGLE,
* which is optionally constrained to rotating around AXIS. *POS
* represents either position, distance, degrees, or radians,
- * depending on the context and supplied arguments.
+ * depending on the context and supplied arguments.
*
* AXIS_FROM_POS is always treated as an absolute position.
* AXIS_TO_POS may be either an absolute position (-a), or a
@@ -350,7 +350,7 @@
* ANGLE_ORIGIN; the y-axis of the drawing. In essense,
* ANGLE_FROM helps define the y-axis, and AXIS defines the
* x-axis.
- *
+ *
* If AXIS is provided, then ANGLE_FROM is aligned to it in
* such a way that the 90 degree angle created by the
* following points is maintained (as illustrated below):
@@ -363,9 +363,9 @@
* Default: | Default 90 degree angle:
* |
* +z ANGLE_ORIGIN | AXIS_TO->ANGLE_ORIGIN
- * | / (from OBJECT) | 90 /
+ * | / (from OBJECT) | 90 /
* AXIS_FROM | o | \o ANGLE_FROM
- * \| | ^ /
+ * \| | ^ /
* AXIS_TO o o | o o _______
* \ / \ \ | \ |compass
* o \ ANGLE_FROM | AXIS_FROM | +z
@@ -444,11 +444,11 @@
* +y cube sphere1
* ___|___ / /
* |q2 | q1| o
- * -x __|___|___|___________+x
- * |q3 | q4| o
- * |___|___| /
+ * -x __|___|___|___________+x
+ * |q3 | q4| o
+ * |___|___| /
* | sphere2
- * -y
+ * -y
*
* # Rotate the cube 45 degrees counterclockwise around its
* # bounding box center, on the z-axis. The corner in q1 will
@@ -560,7 +560,7 @@
* scale [[SCALE_FROM] SCALE_TO] [CENTER] [FACTOR_FROM]
* FACTOR_TO OBJECT ...
* scale [[[-n] -k {SCALE_FROM_OBJECT | SCALE_FROM_POS}]
- * [-n] [-a | -r] {SCALE_TO_OBJECT | SCALE_TO_POS}]
+ * [-n] [-a | -r] {SCALE_TO_OBJECT | SCALE_TO_POS}]
* [[-n] -c {CENTER_OBJECT | CENTER_POS}]
* [[-n] -k {FACTOR_FROM_OBJECT | FACTOR_FROM_POS}]
* [-n] [-a | -r] {FACTOR_TO_OBJECT | FACTOR_TO_POS} OBJECT
@@ -573,7 +573,7 @@
* FACTOR_TO_POS:
* {xyz_factor | {x y [z]}} | {[-x {x | X_OBJ}]
* [-y {y | Y_OBJ}] [-z {z | Z_OBJ}]}
- *
+ *
* *POS (except FACTOR_TO_POS):
* {x [y [z]]} | {[-x {x | X_OBJ}] [-y {y | Y_OBJ}]
* [-z {z | Z_OBJ}]}
@@ -599,8 +599,8 @@
* order to halve it. Specifying a FACTOR_TO_POS of (30,30,30)
* would result in the x-axes of all OBJECT's being stretched to
* quintuple their original lengths, y-axes tripled in length,
- * and z-axes double in length.
- *
+ * and z-axes double in length.
+ *
* (see DESCRIPTION of translate command for other information)
*
* OPTIONS
@@ -649,7 +649,7 @@
* scale -k 5 10 15 -a 7 11 -2 -k 0 0 0 -r 4 2 34 cube
* scale -k 5 10 15 -a 7 11 -2 -k 3 6 9 -r 7 8 43 cube
* scale -k 5 10 15 -a 7 11 -2 -c cube -k 3 6 9 -r 7 8 43 cube
- *
+ *
*/
#include "common.h"
@@ -759,8 +759,8 @@
rt_db_free_internal(&intern);
return GED_ERROR;
}
-
- MAT_DELTAS_ADD_VEC(leaf_to_modify->tr_l.tl_mat, delta);
+
+ MAT_DELTAS_ADD_VEC(leaf_to_modify->tr_l.tl_mat, delta);
} else {
/* no path; move all obj instances (obj's entire tree
* modified) */
@@ -778,7 +778,7 @@
VSCALE(delta, delta, gedp->ged_wdbp->dbip->dbi_local2base);
MAT_DELTAS_VEC(dmat, delta);
- bn_mat_inv(invXform, gtd.gtd_xform);
+ bn_mat_inv(invXform, gtd.gtd_xform);
bn_mat_mul(tmpMat, invXform, dmat);
bn_mat_mul(emat, tmpMat, gtd.gtd_xform);
@@ -838,7 +838,7 @@
char cl_options[EDIT_MAX_ARG_OPTIONS];
/* flag which coords from the vector/object are being used */
- unsigned int coords_used : 3;
+ unsigned int coords_used : 3;
/* flag the argument type and type modifiers */
unsigned int type : 10;
@@ -995,7 +995,7 @@
if (args->common.objects.next)
edit_arg_free_all(args->common.objects.next);
}
-
+
#if 0
int
edit_translate(struct ged *gedp, point_t *from, point_t *to,
@@ -1020,7 +1020,7 @@
return GED_OK;
}
#endif
-
+
/**
* A wrapper for the edit commands. It adds the capability to perform
* batch operations, and accepts objects and distances in addition to
@@ -1066,7 +1066,7 @@
#if 0
struct db_i *dbip = gedp->ged_wdbp->dbip;
- static const char *id_obj_as_arg = ". ";
+ static const char *id_obj_as_arg = ". ";
static const char *id_tuple[] = {"-x", "-y", "-z"};
const char *const cmd_name = argv[0];
@@ -1185,10 +1185,10 @@
}
no_more_args: /* for breaking out, above */
- /*
+ /*
* Validate arguments
*/
-
+
/* need to use either absolute||relative positioning; not both */
if (abs_flag && rel_flag) {
bu_vls_printf(gedp->ged_result_str,
@@ -1199,7 +1199,7 @@
/* set default positioning type */
if (!abs_flag && !rel_flag)
rel_flag = 1;
-
+
/* set delta coordinates for edit */
if ((bu_optind + 1) > argc) {
bu_vls_printf(gedp->ged_result_str, "missing x coordinate");
This was sent by the SourceForge.net collaborative development platform, the
world's largest Open Source development site.
------------------------------------------------------------------------------
AppSumo Presents a FREE Video for the SourceForge Community by Eric
Ries, the creator of the Lean Startup Methodology on "Lean Startup
Secrets Revealed." This video shows you how to validate your ideas,
optimize your ideas and identify your business strategy.
http://p.sf.net/sfu/appsumosfdev2dev
_______________________________________________
BRL-CAD Source Commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/brlcad-commits
