Revision: 56909
http://sourceforge.net/p/brlcad/code/56909
Author: brlcad
Date: 2013-08-16 20:44:15 +0000 (Fri, 16 Aug 2013)
Log Message:
-----------
fix indentation
Modified Paths:
--------------
brlcad/trunk/src/libbn/tests/bn_poly_multiply.c
brlcad/trunk/src/libbn/tests/bn_tri_tri_isect.c
brlcad/trunk/src/libbn/tests/bn_tri_tri_isect_coplanar.c
Modified: brlcad/trunk/src/libbn/tests/bn_poly_multiply.c
===================================================================
--- brlcad/trunk/src/libbn/tests/bn_poly_multiply.c 2013-08-16 20:41:59 UTC
(rev 56908)
+++ brlcad/trunk/src/libbn/tests/bn_poly_multiply.c 2013-08-16 20:44:15 UTC
(rev 56909)
@@ -44,51 +44,51 @@
poly_init(void)
{
- /*stores coefficients (zeros) to polynomial for input and output.*/
- output[0] = bn_Zero_poly;
- input[0] = bn_Zero_poly;
- input[0].dgr = 2;
- input[0].cf[0] = input[0].cf[1] = input[0].cf[2] = input[0].cf[3] = 0.0;
+ /*stores coefficients (zeros) to polynomial for input and output.*/
+ output[0] = bn_Zero_poly;
+ input[0] = bn_Zero_poly;
+ input[0].dgr = 2;
+ input[0].cf[0] = input[0].cf[1] = input[0].cf[2] = input[0].cf[3] = 0.0;
- output[0].dgr = 4;
- output[0].cf[0] = output[0].cf[1] = output[0].cf[2] = output[0].cf[3] =
output[0].cf[4] = 0.0;
+ output[0].dgr = 4;
+ output[0].cf[0] = output[0].cf[1] = output[0].cf[2] = output[0].cf[3] =
output[0].cf[4] = 0.0;
- /*stores negative coefficients to polynomial.*/
- output[1] = bn_Zero_poly;
- input[1] = bn_Zero_poly;
- input[1].dgr = 2;
- output[1].dgr = 4;
+ /*stores negative coefficients to polynomial.*/
+ output[1] = bn_Zero_poly;
+ input[1] = bn_Zero_poly;
+ input[1].dgr = 2;
+ output[1].dgr = 4;
- input[1].cf[0] = -4;
- input[1].cf[1] = -3;
- input[1].cf[2] = -2;
+ input[1].cf[0] = -4;
+ input[1].cf[1] = -3;
+ input[1].cf[2] = -2;
- /**
- * The known output values used for these tests were generated from
- * GNU Octave, version 3.4.3
- */
+ /**
+ * The known output values used for these tests were generated from
+ * GNU Octave, version 3.4.3
+ */
- output[1].cf[0] = 16;
- output[1].cf[1] = 24;
- output[1].cf[2] = 25;
- output[1].cf[3] = 12;
- output[1].cf[4] = 4;
+ output[1].cf[0] = 16;
+ output[1].cf[1] = 24;
+ output[1].cf[2] = 25;
+ output[1].cf[3] = 12;
+ output[1].cf[4] = 4;
- /*stores positive coefficients to to polynomial input.*/
- output[2] = bn_Zero_poly;
- input[2] = bn_Zero_poly;
- input[2].dgr = 2;
- output[2].dgr = 4;
+ /*stores positive coefficients to to polynomial input.*/
+ output[2] = bn_Zero_poly;
+ input[2] = bn_Zero_poly;
+ input[2].dgr = 2;
+ output[2].dgr = 4;
- input[2].cf[0] = 7854;
- input[2].cf[1] = 2136;
- input[2].cf[2] = 1450;
+ input[2].cf[0] = 7854;
+ input[2].cf[1] = 2136;
+ input[2].cf[2] = 1450;
- output[2].cf[0] = 61685316;
- output[2].cf[1] = 33552288;
- output[2].cf[2] = 27339096;
- output[2].cf[3] = 6194400;
- output[2].cf[4] = 2102500;
+ output[2].cf[0] = 61685316;
+ output[2].cf[1] = 33552288;
+ output[2].cf[2] = 27339096;
+ output[2].cf[3] = 6194400;
+ output[2].cf[4] = 2102500;
}
@@ -97,57 +97,57 @@
int
check_results(fastf_t a[], fastf_t b[], int n)
{
- int i;
+ int i;
- for (i = 0; i < n; i++) {
- if (!EQUAL(a[i],b[i]))
- return -1;
- }
+ for (i = 0; i < n; i++) {
+ if (!EQUAL(a[i],b[i]))
+ return -1;
+ }
- return 0;
+ return 0;
}
/*tests the polynomials to make sure bn_poly_mul() works properly.*/
int test_bn_poly(void)
{
- int val, val1, val2;
- bn_poly_t a, b, c;
- a = bn_Zero_poly, b = bn_Zero_poly, c = bn_Zero_poly;
+ int val, val1, val2;
+ bn_poly_t a, b, c;
+ a = bn_Zero_poly, b = bn_Zero_poly, c = bn_Zero_poly;
- bn_poly_mul(&a, &input[0], &input[0]);
- bn_poly_mul(&b, &input[1], &input[1]);
- bn_poly_mul(&c, &input[2], &input[2]);
+ bn_poly_mul(&a, &input[0], &input[0]);
+ bn_poly_mul(&b, &input[1], &input[1]);
+ bn_poly_mul(&c, &input[2], &input[2]);
- val = check_results(a.cf,output[0].cf, output[0].dgr + 1);
- val1 = check_results( b.cf, output[1].cf, output[1].dgr + 1);
- val2 = check_results(c.cf, output[2].cf, output[2].dgr + 1);
+ val = check_results(a.cf,output[0].cf, output[0].dgr + 1);
+ val1 = check_results( b.cf, output[1].cf, output[1].dgr + 1);
+ val2 = check_results(c.cf, output[2].cf, output[2].dgr + 1);
- if (val == 0 && val1 == 0 && val2 == 0)
- return val;
+ if (val == 0 && val1 == 0 && val2 == 0)
+ return val;
- return -1;
+ return -1;
}
int main(void)
{
- int ret;
+ int ret;
- poly_init();
+ poly_init();
- ret = test_bn_poly();
+ ret = test_bn_poly();
- if( ret == 0){
- bu_log("\nFunction computes correctly\n");
+ if( ret == 0){
+ bu_log("\nFunction computes correctly\n");
- return ret;
- }
+ return ret;
+ }
- else {
- bu_log("\nInvalid output.\n");
- }
- return -1;
+ else {
+ bu_log("\nInvalid output.\n");
+ }
+ return -1;
}
Modified: brlcad/trunk/src/libbn/tests/bn_tri_tri_isect.c
===================================================================
--- brlcad/trunk/src/libbn/tests/bn_tri_tri_isect.c 2013-08-16 20:41:59 UTC
(rev 56908)
+++ brlcad/trunk/src/libbn/tests/bn_tri_tri_isect.c 2013-08-16 20:44:15 UTC
(rev 56909)
@@ -63,9 +63,9 @@
bu_log("result: %d\n", actual_result);
if(expected_result == actual_result) {
- return 0;
+ return 0;
} else {
- return -1;
+ return -1;
}
}
Modified: brlcad/trunk/src/libbn/tests/bn_tri_tri_isect_coplanar.c
===================================================================
--- brlcad/trunk/src/libbn/tests/bn_tri_tri_isect_coplanar.c 2013-08-16
20:41:59 UTC (rev 56908)
+++ brlcad/trunk/src/libbn/tests/bn_tri_tri_isect_coplanar.c 2013-08-16
20:44:15 UTC (rev 56909)
@@ -65,9 +65,9 @@
bu_log("result: %d\n", actual_result);
if(expected_result == actual_result) {
- return 0;
+ return 0;
} else {
- return -1;
+ return -1;
}
}
This was sent by the SourceForge.net collaborative development platform, the
world's largest Open Source development site.
------------------------------------------------------------------------------
Get 100% visibility into Java/.NET code with AppDynamics Lite!
It's a free troubleshooting tool designed for production.
Get down to code-level detail for bottlenecks, with <2% overhead.
Download for free and get started troubleshooting in minutes.
http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk
_______________________________________________
BRL-CAD Source Commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/brlcad-commits
