Revision: 77557
http://sourceforge.net/p/brlcad/code/77557
Author: starseeker
Date: 2020-10-22 21:34:20 +0000 (Thu, 22 Oct 2020)
Log Message:
-----------
Break out CPack logic into its own file
Modified Paths:
--------------
brlcad/branches/extbuild/CMakeLists.txt
brlcad/branches/extbuild/misc/CMake/CMakeLists.txt
Added Paths:
-----------
brlcad/branches/extbuild/misc/CMake/BRLCAD_CPack.cmake
Modified: brlcad/branches/extbuild/CMakeLists.txt
===================================================================
--- brlcad/branches/extbuild/CMakeLists.txt 2020-10-22 21:21:03 UTC (rev
77556)
+++ brlcad/branches/extbuild/CMakeLists.txt 2020-10-22 21:34:20 UTC (rev
77557)
@@ -2195,161 +2195,11 @@
# CPack is used to produce tgz files, RPMS, etc. If SUBBUILD is enabled this
# becomes the responsibility of the parent project.
if(NOT BRLCAD_IS_SUBBUILD)
+ include(BRLCAD_CPack)
+endif(NOT BRLCAD_IS_SUBBUILD)
- configure_file("${BRLCAD_CMAKE_DIR}/source_archive_setup.cmake.in"
"${CMAKE_CURRENT_BINARY_DIR}/CMakeTmp/source_archive_setup.cmake" @ONLY)
- DISTCLEAN("${CMAKE_CURRENT_BINARY_DIR}/CMakeTmp/source_archive_setup.cmake")
- set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "BRL-CAD - a powerful cross-platform
open source solid modeling system")
- set(CPACK_PACKAGE_VENDOR "BRL-CAD Development Team")
- set(CPACK_RESOURCE_FILE_README "${CMAKE_CURRENT_SOURCE_DIR}/README")
- set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_CURRENT_SOURCE_DIR}/COPYING")
- set(CPACK_PACKAGE_VERSION_MAJOR ${BRLCAD_VERSION_MAJOR})
- set(CPACK_PACKAGE_VERSION_MINOR ${BRLCAD_VERSION_MINOR})
- set(CPACK_PACKAGE_VERSION_PATCH ${BRLCAD_VERSION_PATCH})
-
- # By default, we want debugging information
- set(CPACK_STRIP_FILES FALSE)
-
- # If we're not on Windows, set the install prefix and create
- # TGZ and TBZ2 packages by default
- if(NOT WIN32)
- set(CPACK_PACKAGING_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}")
- set(CPACK_GENERATOR TGZ TBZ2)
- endif(NOT WIN32)
-
- # If we have RPMBUILD and it's not explicitly disabled, assume we're making
an RPM.
- find_program(RPMBUILD_EXEC rpmbuild)
- mark_as_advanced(RPMBUILD_EXEC)
- if(RPMBUILD_EXEC AND NOT CPACK_RPM_SKIP)
-
- # Build an RPM by default if we have the tool. Out of the box, just
- # build a "vanilla" RPM. For situations where we want more detail
- # and versioning of the RPM, set the variable CMAKE_RPM_VERSION
- # to the numerical "version" of the RPM: 1, 2, etc..
-
- # Since RPM packages present a particular problem with bad umask
- # settings and RPM package building is enabled, raise the issue again
- # with a longer wait time.
- if (NOT UMASK_OK)
- message(" ")
- message(WARNING "umask is set to ${umask_curr} and RPM package building
is enabled - this is not a 'standard' umask setting for BRL-CAD RPM packages.
Double check that these umask permissions will have the desired results when
installed - RPM packages can impact permissions on system directories such as
/usr\nIf the umask settings need to be changed, it is recommended that the
build directory be cleared and cmake re-run after the umask setting has been
changed.")
- if(SLEEP_EXEC)
- execute_process(COMMAND ${SLEEP_EXEC} 5)
- endif(SLEEP_EXEC)
- endif (NOT UMASK_OK)
-
- set(CPACK_GENERATOR ${CPACK_GENERATOR} RPM)
- set(CPACK_RPM_PACKAGE_LICENSE "LGPL 2.1")
- set(CPACK_RPM_PACKAGE_GROUP "Applications/Engineering")
- set(CPACK_RPM_PACKAGE_ARCHITECTURE "${CMAKE_SYSTEM_PROCESSOR}")
-
- # We do NOT want to strip the binaries added to the RPM -
- # see https://cmake.org/Wiki/CMake:CPackPackageGenerators and
- # https://public.kitware.com/Bug/view.php?id=7435
- set(CPACK_RPM_SPEC_INSTALL_POST /bin/true)
-
- if(CPACK_RPM_VERSION)
- if(DEFINED BRLCAD_VERSION_AMEND)
- set(CPACK_RPM_PACKAGE_NAME
"brlcad_${BRLCAD_VERSION_MAJOR}_${BRLCAD_VERSION_MINOR}_${BRLCAD_VERSION_PATCH}_${BRLCAD_VERSION_AMEND}")
- else(DEFINED BRLCAD_VERSION_AMEND)
- set(CPACK_RPM_PACKAGE_NAME
"brlcad_${BRLCAD_VERSION_MAJOR}_${BRLCAD_VERSION_MINOR}_${BRLCAD_VERSION_PATCH}")
- endif(DEFINED BRLCAD_VERSION_AMEND)
-
- # If we've got a Redhat release, include some info about the
- # specific release in the name. Otherwise, just go generic.
- if(EXISTS /etc/redhat-release)
- file(READ /etc/redhat-release REDHAT_RELEASE)
- string(REGEX MATCH "[0-9]+" REDHAT_VERSION ${REDHAT_RELEASE})
- string(REGEX MATCH "Enterprise Linux" LINUX_DIST_TYPE ${REDHAT_RELEASE})
- if(LINUX_DIST_TYPE)
- set(LINUX_DIST_TYPE "el")
- else(LINUX_DIST_TYPE)
- set(LINUX_DIST_TYPE "rh")
- endif(LINUX_DIST_TYPE)
- set(CPACK_RPM_PACKAGE_RELEASE
${CPACK_RPM_VERSION}.${LINUX_DIST_TYPE}${REDHAT_VERSION})
- else(EXISTS /etc/redhat-release)
- set(CPACK_RPM_PACKAGE_RELEASE ${CPACK_RPM_VERSION})
- endif(EXISTS /etc/redhat-release)
-
- endif(CPACK_RPM_VERSION)
- endif(RPMBUILD_EXEC AND NOT CPACK_RPM_SKIP)
-
- if(${CMAKE_WORD_SIZE} MATCHES "32BIT" AND ${CMAKE_SYSTEM_PROCESSOR} STREQUAL
"x86_64")
- set(CPACK_PACKAGE_FILE_NAME
"BRL-CAD_${BRLCAD_VERSION}_${CMAKE_SYSTEM_NAME}_x86")
- else(${CMAKE_WORD_SIZE} MATCHES "32BIT" AND ${CMAKE_SYSTEM_PROCESSOR}
STREQUAL "x86_64")
- set(CPACK_PACKAGE_FILE_NAME
"BRL-CAD_${BRLCAD_VERSION}_${CMAKE_SYSTEM_NAME}_${CMAKE_SYSTEM_PROCESSOR}")
- endif(${CMAKE_WORD_SIZE} MATCHES "32BIT" AND ${CMAKE_SYSTEM_PROCESSOR}
STREQUAL "x86_64")
- if(CPACK_RPM_PACKAGE_RELEASE)
- set(CPACK_PACKAGE_FILE_NAME
"${CPACK_PACKAGE_FILE_NAME}_${CPACK_RPM_PACKAGE_RELEASE}")
- endif(CPACK_RPM_PACKAGE_RELEASE)
-
- if(WIN32)
- find_package(NSIS)
- if (NSIS_FOUND)
- set(CPACK_GENERATOR ${CPACK_GENERATOR} NSIS)
- set(CPACK_NSIS_PACKAGE_NAME "BRL-CAD")
- set(CPACK_NSIS_INSTALL_DIRECTORY "BRL-CAD ${BRLCAD_VERSION}")
- set(CPACK_SOURCE_DIR "${CMAKE_SOURCE_DIR}")
- set(CPACK_DATA_DIR "${DATA_DIR}")
- set(CPACK_DOC_DIR "${DOC_DIR}")
- # There is a bug in NSIS that does not handle full unix paths properly.
Make
- # sure there is at least one set of four (4) backslashes.
- set(CPACK_NSIS_MUI_ICON "${CMAKE_SOURCE_DIR}/misc/nsis\\\\brlcad.ico")
- set(CPACK_NSIS_MUI_UNIICON
"${CMAKE_SOURCE_DIR}/misc/nsis\\\\uninstall.ico")
- set(CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL ON)
- set(CPACK_NSIS_DISPLAY_NAME "BRL-CAD")
- set(CPACK_NSIS_MODIFY_PATH ON)
- endif (NSIS_FOUND)
- find_package(Wix)
- if (Wix_FOUND)
- # User report that this version of the installer also supports
- # non-graphical installation with the /passive option.
- #
- # Note: for WiX, start menu shortcuts and desktop icons are handled with
- # properties set on targets. (At the moment, this is not true for NSIS -
- # it uses entries in the misc/CMake/NSIS.template.in file.)
- #
- # If we need to get fancier about this, look at the following:
- #
https://github.com/Kitware/CMake/blob/master/CMakeCPackOptions.cmake.in#L216
- # https://github.com/Kitware/CMake/tree/master/Utilities/Release/WiX
- set(CPACK_GENERATOR ${CPACK_GENERATOR} WIX)
- set(CPACK_WIX_LICENSE_RTF "${CMAKE_SOURCE_DIR}/misc/wix/License.rtf")
- set(CPACK_WIX_PRODUCT_ICON
"${CMAKE_SOURCE_DIR}/misc/wix/brlcad_product.ico")
- set(CPACK_WIX_PROGRAM_MENU_FOLDER "BRL-CAD ${BRLCAD_VERSION}")
- set(CPACK_WIX_UI_BANNER "${CMAKE_SOURCE_DIR}/misc/wix/brlcad_banner.bmp")
- set(CPACK_WIX_UI_DIALOG "${CMAKE_SOURCE_DIR}/misc/wix/brlcad_dialog.bmp")
- endif (Wix_FOUND)
- if (NOT CPACK_GENERATOR)
- # If nothing else, make a zip file
- set(CPACK_GENERATOR ZIP)
- endif (NOT CPACK_GENERATOR)
- if(CMAKE_CL_64)
- set(CPACK_PACKAGE_FILE_NAME "BRL-CAD_${BRLCAD_VERSION}_win64")
- set(CPACK_PACKAGE_INSTALL_REGISTRY_KEY "BRL-CAD ${BRLCAD_VERSION} win64")
- # Use the setting from
http://public.kitware.com/pipermail/cmake/2013-June/055000.html to
- # provide the correct default 64 bit directory with older CMake versions
- set(CPACK_NSIS_INSTALL_ROOT "$PROGRAMFILES64")
- else(CMAKE_CL_64)
- set(CPACK_PACKAGE_FILE_NAME "BRL-CAD_${BRLCAD_VERSION}_win32")
- set(CPACK_PACKAGE_INSTALL_REGISTRY_KEY "BRL-CAD ${BRLCAD_VERSION} win32")
- set(CPACK_NSIS_PACKAGE_NAME "BRL-CAD (32 Bit)")
- endif(CMAKE_CL_64)
- endif(WIN32)
-
- set(CPACK_SOURCE_GENERATOR TGZ TBZ2 ZIP)
- set(CPACK_SOURCE_PACKAGE_FILE_NAME "brlcad-${BRLCAD_VERSION}")
- set(CPACK_SOURCE_IGNORE_FILES "\\\\.svn/")
-
- configure_file("${BRLCAD_CMAKE_DIR}/BRLCAD_CPackOptions.cmake.in"
"${CMAKE_BINARY_DIR}/BRLCAD_CPackOptions.cmake" @ONLY)
- DISTCLEAN("${CMAKE_BINARY_DIR}/BRLCAD_CPackOptions.cmake")
- set(CPACK_PROJECT_CONFIG_FILE
"${CMAKE_BINARY_DIR}/BRLCAD_CPackOptions.cmake")
-
- include(CPack)
-
- DISTCLEAN("${CMAKE_BINARY_DIR}/CPackConfig.cmake")
- DISTCLEAN("${CMAKE_BINARY_DIR}/CPackSourceConfig.cmake")
- DISTCLEAN("${CMAKE_BINARY_DIR}/DartConfiguration.tcl")
-
+if(NOT BRLCAD_IS_SUBBUILD)
# Some files to ignore for distcheck. For this case
# only, we add CMakeLists.txt (others are handled
# by add_subdirectory wrapper
Added: brlcad/branches/extbuild/misc/CMake/BRLCAD_CPack.cmake
===================================================================
--- brlcad/branches/extbuild/misc/CMake/BRLCAD_CPack.cmake
(rev 0)
+++ brlcad/branches/extbuild/misc/CMake/BRLCAD_CPack.cmake 2020-10-22
21:34:20 UTC (rev 77557)
@@ -0,0 +1,154 @@
+configure_file("${BRLCAD_CMAKE_DIR}/source_archive_setup.cmake.in"
"${CMAKE_CURRENT_BINARY_DIR}/CMakeTmp/source_archive_setup.cmake" @ONLY)
+DISTCLEAN("${CMAKE_CURRENT_BINARY_DIR}/CMakeTmp/source_archive_setup.cmake")
+
+set(CPACK_PACKAGE_DESCRIPTION_SUMMARY "BRL-CAD - a powerful cross-platform
open source solid modeling system")
+set(CPACK_PACKAGE_VENDOR "BRL-CAD Development Team")
+set(CPACK_RESOURCE_FILE_README "${CMAKE_CURRENT_SOURCE_DIR}/README")
+set(CPACK_RESOURCE_FILE_LICENSE "${CMAKE_CURRENT_SOURCE_DIR}/COPYING")
+set(CPACK_PACKAGE_VERSION_MAJOR ${BRLCAD_VERSION_MAJOR})
+set(CPACK_PACKAGE_VERSION_MINOR ${BRLCAD_VERSION_MINOR})
+set(CPACK_PACKAGE_VERSION_PATCH ${BRLCAD_VERSION_PATCH})
+
+# By default, we want debugging information
+set(CPACK_STRIP_FILES FALSE)
+
+# If we're not on Windows, set the install prefix and create
+# TGZ and TBZ2 packages by default
+if(NOT WIN32)
+ set(CPACK_PACKAGING_INSTALL_PREFIX "${CMAKE_INSTALL_PREFIX}")
+ set(CPACK_GENERATOR TGZ TBZ2)
+endif(NOT WIN32)
+
+# If we have RPMBUILD and it's not explicitly disabled, assume we're making an
RPM.
+find_program(RPMBUILD_EXEC rpmbuild)
+mark_as_advanced(RPMBUILD_EXEC)
+if(RPMBUILD_EXEC AND NOT CPACK_RPM_SKIP)
+
+ # Build an RPM by default if we have the tool. Out of the box, just
+ # build a "vanilla" RPM. For situations where we want more detail
+ # and versioning of the RPM, set the variable CMAKE_RPM_VERSION
+ # to the numerical "version" of the RPM: 1, 2, etc..
+
+ # Since RPM packages present a particular problem with bad umask
+ # settings and RPM package building is enabled, raise the issue again
+ # with a longer wait time.
+ if (NOT UMASK_OK)
+ message(" ")
+ message(WARNING "umask is set to ${umask_curr} and RPM package
building is enabled - this is not a 'standard' umask setting for BRL-CAD RPM
packages. Double check that these umask permissions will have the desired
results when installed - RPM packages can impact permissions on system
directories such as /usr\nIf the umask settings need to be changed, it is
recommended that the build directory be cleared and cmake re-run after the
umask setting has been changed.")
+ if(SLEEP_EXEC)
+ execute_process(COMMAND ${SLEEP_EXEC} 5)
+ endif(SLEEP_EXEC)
+ endif (NOT UMASK_OK)
+
+ set(CPACK_GENERATOR ${CPACK_GENERATOR} RPM)
+ set(CPACK_RPM_PACKAGE_LICENSE "LGPL 2.1")
+ set(CPACK_RPM_PACKAGE_GROUP "Applications/Engineering")
+ set(CPACK_RPM_PACKAGE_ARCHITECTURE "${CMAKE_SYSTEM_PROCESSOR}")
+
+ # We do NOT want to strip the binaries added to the RPM -
+ # see https://cmake.org/Wiki/CMake:CPackPackageGenerators and
+ # https://public.kitware.com/Bug/view.php?id=7435
+ set(CPACK_RPM_SPEC_INSTALL_POST /bin/true)
+
+ if(CPACK_RPM_VERSION)
+ if(DEFINED BRLCAD_VERSION_AMEND)
+ set(CPACK_RPM_PACKAGE_NAME
"brlcad_${BRLCAD_VERSION_MAJOR}_${BRLCAD_VERSION_MINOR}_${BRLCAD_VERSION_PATCH}_${BRLCAD_VERSION_AMEND}")
+ else(DEFINED BRLCAD_VERSION_AMEND)
+ set(CPACK_RPM_PACKAGE_NAME
"brlcad_${BRLCAD_VERSION_MAJOR}_${BRLCAD_VERSION_MINOR}_${BRLCAD_VERSION_PATCH}")
+ endif(DEFINED BRLCAD_VERSION_AMEND)
+
+ # If we've got a Redhat release, include some info about the
+ # specific release in the name. Otherwise, just go generic.
+ if(EXISTS /etc/redhat-release)
+ file(READ /etc/redhat-release REDHAT_RELEASE)
+ string(REGEX MATCH "[0-9]+" REDHAT_VERSION
${REDHAT_RELEASE})
+ string(REGEX MATCH "Enterprise Linux" LINUX_DIST_TYPE
${REDHAT_RELEASE})
+ if(LINUX_DIST_TYPE)
+ set(LINUX_DIST_TYPE "el")
+ else(LINUX_DIST_TYPE)
+ set(LINUX_DIST_TYPE "rh")
+ endif(LINUX_DIST_TYPE)
+ set(CPACK_RPM_PACKAGE_RELEASE
${CPACK_RPM_VERSION}.${LINUX_DIST_TYPE}${REDHAT_VERSION})
+ else(EXISTS /etc/redhat-release)
+ set(CPACK_RPM_PACKAGE_RELEASE ${CPACK_RPM_VERSION})
+ endif(EXISTS /etc/redhat-release)
+
+ endif(CPACK_RPM_VERSION)
+endif(RPMBUILD_EXEC AND NOT CPACK_RPM_SKIP)
+
+if(${CMAKE_WORD_SIZE} MATCHES "32BIT" AND ${CMAKE_SYSTEM_PROCESSOR} STREQUAL
"x86_64")
+ set(CPACK_PACKAGE_FILE_NAME
"BRL-CAD_${BRLCAD_VERSION}_${CMAKE_SYSTEM_NAME}_x86")
+else(${CMAKE_WORD_SIZE} MATCHES "32BIT" AND ${CMAKE_SYSTEM_PROCESSOR} STREQUAL
"x86_64")
+ set(CPACK_PACKAGE_FILE_NAME
"BRL-CAD_${BRLCAD_VERSION}_${CMAKE_SYSTEM_NAME}_${CMAKE_SYSTEM_PROCESSOR}")
+endif(${CMAKE_WORD_SIZE} MATCHES "32BIT" AND ${CMAKE_SYSTEM_PROCESSOR}
STREQUAL "x86_64")
+if(CPACK_RPM_PACKAGE_RELEASE)
+ set(CPACK_PACKAGE_FILE_NAME
"${CPACK_PACKAGE_FILE_NAME}_${CPACK_RPM_PACKAGE_RELEASE}")
+endif(CPACK_RPM_PACKAGE_RELEASE)
+
+if(WIN32)
+ find_package(NSIS)
+ if (NSIS_FOUND)
+ set(CPACK_GENERATOR ${CPACK_GENERATOR} NSIS)
+ set(CPACK_NSIS_PACKAGE_NAME "BRL-CAD")
+ set(CPACK_NSIS_INSTALL_DIRECTORY "BRL-CAD ${BRLCAD_VERSION}")
+ set(CPACK_SOURCE_DIR "${CMAKE_SOURCE_DIR}")
+ set(CPACK_DATA_DIR "${DATA_DIR}")
+ set(CPACK_DOC_DIR "${DOC_DIR}")
+ # There is a bug in NSIS that does not handle full unix paths
properly. Make
+ # sure there is at least one set of four (4) backslashes.
+ set(CPACK_NSIS_MUI_ICON
"${CMAKE_SOURCE_DIR}/misc/nsis\\\\brlcad.ico")
+ set(CPACK_NSIS_MUI_UNIICON
"${CMAKE_SOURCE_DIR}/misc/nsis\\\\uninstall.ico")
+ set(CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL ON)
+ set(CPACK_NSIS_DISPLAY_NAME "BRL-CAD")
+ set(CPACK_NSIS_MODIFY_PATH ON)
+ endif (NSIS_FOUND)
+ find_package(Wix)
+ if (Wix_FOUND)
+ # User report that this version of the installer also supports
+ # non-graphical installation with the /passive option.
+ #
+ # Note: for WiX, start menu shortcuts and desktop icons are
handled with
+ # properties set on targets. (At the moment, this is not true
for NSIS -
+ # it uses entries in the misc/CMake/NSIS.template.in file.)
+ #
+ # If we need to get fancier about this, look at the following:
+ #
https://github.com/Kitware/CMake/blob/master/CMakeCPackOptions.cmake.in#L216
+ #
https://github.com/Kitware/CMake/tree/master/Utilities/Release/WiX
+ set(CPACK_GENERATOR ${CPACK_GENERATOR} WIX)
+ set(CPACK_WIX_LICENSE_RTF
"${CMAKE_SOURCE_DIR}/misc/wix/License.rtf")
+ set(CPACK_WIX_PRODUCT_ICON
"${CMAKE_SOURCE_DIR}/misc/wix/brlcad_product.ico")
+ set(CPACK_WIX_PROGRAM_MENU_FOLDER "BRL-CAD ${BRLCAD_VERSION}")
+ set(CPACK_WIX_UI_BANNER
"${CMAKE_SOURCE_DIR}/misc/wix/brlcad_banner.bmp")
+ set(CPACK_WIX_UI_DIALOG
"${CMAKE_SOURCE_DIR}/misc/wix/brlcad_dialog.bmp")
+ endif (Wix_FOUND)
+ if (NOT CPACK_GENERATOR)
+ # If nothing else, make a zip file
+ set(CPACK_GENERATOR ZIP)
+ endif (NOT CPACK_GENERATOR)
+ if(CMAKE_CL_64)
+ set(CPACK_PACKAGE_FILE_NAME "BRL-CAD_${BRLCAD_VERSION}_win64")
+ set(CPACK_PACKAGE_INSTALL_REGISTRY_KEY "BRL-CAD
${BRLCAD_VERSION} win64")
+ # Use the setting from
http://public.kitware.com/pipermail/cmake/2013-June/055000.html to
+ # provide the correct default 64 bit directory with older CMake
versions
+ set(CPACK_NSIS_INSTALL_ROOT "$PROGRAMFILES64")
+ else(CMAKE_CL_64)
+ set(CPACK_PACKAGE_FILE_NAME "BRL-CAD_${BRLCAD_VERSION}_win32")
+ set(CPACK_PACKAGE_INSTALL_REGISTRY_KEY "BRL-CAD
${BRLCAD_VERSION} win32")
+ set(CPACK_NSIS_PACKAGE_NAME "BRL-CAD (32 Bit)")
+ endif(CMAKE_CL_64)
+endif(WIN32)
+
+set(CPACK_SOURCE_GENERATOR TGZ TBZ2 ZIP)
+set(CPACK_SOURCE_PACKAGE_FILE_NAME "brlcad-${BRLCAD_VERSION}")
+set(CPACK_SOURCE_IGNORE_FILES "\\\\.svn/")
+
+configure_file("${BRLCAD_CMAKE_DIR}/BRLCAD_CPackOptions.cmake.in"
"${CMAKE_BINARY_DIR}/BRLCAD_CPackOptions.cmake" @ONLY)
+DISTCLEAN("${CMAKE_BINARY_DIR}/BRLCAD_CPackOptions.cmake")
+set(CPACK_PROJECT_CONFIG_FILE "${CMAKE_BINARY_DIR}/BRLCAD_CPackOptions.cmake")
+
+include(CPack)
+
+DISTCLEAN("${CMAKE_BINARY_DIR}/CPackConfig.cmake")
+DISTCLEAN("${CMAKE_BINARY_DIR}/CPackSourceConfig.cmake")
+DISTCLEAN("${CMAKE_BINARY_DIR}/DartConfiguration.tcl")
+
Property changes on: brlcad/branches/extbuild/misc/CMake/BRLCAD_CPack.cmake
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Modified: brlcad/branches/extbuild/misc/CMake/CMakeLists.txt
===================================================================
--- brlcad/branches/extbuild/misc/CMake/CMakeLists.txt 2020-10-22 21:21:03 UTC
(rev 77556)
+++ brlcad/branches/extbuild/misc/CMake/CMakeLists.txt 2020-10-22 21:34:20 UTC
(rev 77557)
@@ -1,5 +1,6 @@
set(cmake_ignore_files
BRLCAD_Build_Types.cmake
+ BRLCAD_CPack.cmake
BRLCAD_CPackOptions.cmake.in
BRLCAD_CheckFunctions.cmake
BRLCAD_Environment_Setup.cmake
This was sent by the SourceForge.net collaborative development platform, the
world's largest Open Source development site.
_______________________________________________
BRL-CAD Source Commits mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/brlcad-commits
