[brlcad-commits] SF.net SVN: brlcad:[77613] brlcad/branches/extbuild/src/other/ext

[starseeker--- via brlcad-commits]

Revision: 77613
          http://sourceforge.net/p/brlcad/code/77613
Author:   starseeker
Date:     2020-10-23 15:47:03 +0000 (Fri, 23 Oct 2020)
Log Message:
-----------
svn add skipped the Makefile.in files

Added Paths:
-----------
    brlcad/branches/extbuild/src/other/ext/tcl/compat/zlib/Makefile.in
    brlcad/branches/extbuild/src/other/ext/tcl/pkgs/itcl4.2.0/Makefile.in
    brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbc1.1.1/Makefile.in
    brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcmysql1.1.1/Makefile.in
    brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcodbc1.1.1/Makefile.in
    
brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcpostgres1.1.1/Makefile.in
    
brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcsqlite3-1.1.1/Makefile.in
    brlcad/branches/extbuild/src/other/ext/tcl/pkgs/thread2.8.5/Makefile.in
    brlcad/branches/extbuild/src/other/ext/tcl/tools/Makefile.in
    brlcad/branches/extbuild/src/other/ext/tcl/unix/Makefile.in
    brlcad/branches/extbuild/src/other/ext/tcl/unix/dltest/Makefile.in
    brlcad/branches/extbuild/src/other/ext/tcl/win/Makefile.in
    brlcad/branches/extbuild/src/other/ext/tk/unix/Makefile.in
    brlcad/branches/extbuild/src/other/ext/tk/win/Makefile.in

Added: brlcad/branches/extbuild/src/other/ext/tcl/compat/zlib/Makefile.in
===================================================================
--- brlcad/branches/extbuild/src/other/ext/tcl/compat/zlib/Makefile.in          
                (rev 0)
+++ brlcad/branches/extbuild/src/other/ext/tcl/compat/zlib/Makefile.in  
2020-10-23 15:47:03 UTC (rev 77613)
@@ -0,0 +1,410 @@
+# Makefile for zlib
+# Copyright (C) 1995-2017 Jean-loup Gailly, Mark Adler
+# For conditions of distribution and use, see copyright notice in zlib.h
+
+# To compile and test, type:
+#    ./configure; make test
+# Normally configure builds both a static and a shared library.
+# If you want to build just a static library, use: ./configure --static
+
+# To use the asm code, type:
+#    cp contrib/asm?86/match.S ./match.S
+#    make LOC=-DASMV OBJA=match.o
+
+# To install /usr/local/lib/libz.* and /usr/local/include/zlib.h, type:
+#    make install
+# To install in $HOME instead of /usr/local, use:
+#    make install prefix=$HOME
+
+CC=cc
+
+CFLAGS=-O
+#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
+#CFLAGS=-g -DZLIB_DEBUG
+#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
+#           -Wstrict-prototypes -Wmissing-prototypes
+
+SFLAGS=-O
+LDFLAGS=
+TEST_LDFLAGS=-L. libz.a
+LDSHARED=$(CC)
+CPP=$(CC) -E
+
+STATICLIB=libz.a
+SHAREDLIB=libz.so
+SHAREDLIBV=libz.so.1.2.11
+SHAREDLIBM=libz.so.1
+LIBS=$(STATICLIB) $(SHAREDLIBV)
+
+AR=ar
+ARFLAGS=rc
+RANLIB=ranlib
+LDCONFIG=ldconfig
+LDSHAREDLIBC=-lc
+TAR=tar
+SHELL=/bin/sh
+EXE=
+
+prefix = /usr/local
+exec_prefix = ${prefix}
+libdir = ${exec_prefix}/lib
+sharedlibdir = ${libdir}
+includedir = ${prefix}/include
+mandir = ${prefix}/share/man
+man3dir = ${mandir}/man3
+pkgconfigdir = ${libdir}/pkgconfig
+SRCDIR=
+ZINC=
+ZINCOUT=-I.
+
+OBJZ = adler32.o crc32.o deflate.o infback.o inffast.o inflate.o inftrees.o 
trees.o zutil.o
+OBJG = compress.o uncompr.o gzclose.o gzlib.o gzread.o gzwrite.o
+OBJC = $(OBJZ) $(OBJG)
+
+PIC_OBJZ = adler32.lo crc32.lo deflate.lo infback.lo inffast.lo inflate.lo 
inftrees.lo trees.lo zutil.lo
+PIC_OBJG = compress.lo uncompr.lo gzclose.lo gzlib.lo gzread.lo gzwrite.lo
+PIC_OBJC = $(PIC_OBJZ) $(PIC_OBJG)
+
+# to use the asm code: make OBJA=match.o, PIC_OBJA=match.lo
+OBJA =
+PIC_OBJA =
+
+OBJS = $(OBJC) $(OBJA)
+
+PIC_OBJS = $(PIC_OBJC) $(PIC_OBJA)
+
+all: static shared
+
+static: example$(EXE) minigzip$(EXE)
+
+shared: examplesh$(EXE) minigzipsh$(EXE)
+
+all64: example64$(EXE) minigzip64$(EXE)
+
+check: test
+
+test: all teststatic testshared
+
+teststatic: static
+       @TMPST=tmpst_$$; \
+       if echo hello world | ./minigzip | ./minigzip -d && ./example $$TMPST ; 
then \
+         echo '                *** zlib test OK ***'; \
+       else \
+         echo '                *** zlib test FAILED ***'; false; \
+       fi; \
+       rm -f $$TMPST
+
+testshared: shared
+       @LD_LIBRARY_PATH=`pwd`:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
+       LD_LIBRARYN32_PATH=`pwd`:$(LD_LIBRARYN32_PATH) ; export 
LD_LIBRARYN32_PATH; \
+       DYLD_LIBRARY_PATH=`pwd`:$(DYLD_LIBRARY_PATH) ; export 
DYLD_LIBRARY_PATH; \
+       SHLIB_PATH=`pwd`:$(SHLIB_PATH) ; export SHLIB_PATH; \
+       TMPSH=tmpsh_$$; \
+       if echo hello world | ./minigzipsh | ./minigzipsh -d && ./examplesh 
$$TMPSH; then \
+         echo '                *** zlib shared test OK ***'; \
+       else \
+         echo '                *** zlib shared test FAILED ***'; false; \
+       fi; \
+       rm -f $$TMPSH
+
+test64: all64
+       @TMP64=tmp64_$$; \
+       if echo hello world | ./minigzip64 | ./minigzip64 -d && ./example64 
$$TMP64; then \
+         echo '                *** zlib 64-bit test OK ***'; \
+       else \
+         echo '                *** zlib 64-bit test FAILED ***'; false; \
+       fi; \
+       rm -f $$TMP64
+
+infcover.o: $(SRCDIR)test/infcover.c $(SRCDIR)zlib.h zconf.h
+       $(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/infcover.c
+
+infcover: infcover.o libz.a
+       $(CC) $(CFLAGS) -o $@ infcover.o libz.a
+
+cover: infcover
+       rm -f *.gcda
+       ./infcover
+       gcov inf*.c
+
+libz.a: $(OBJS)
+       $(AR) $(ARFLAGS) $@ $(OBJS)
+       -@ ($(RANLIB) $@ || true) >/dev/null 2>&1
+
+match.o: match.S
+       $(CPP) match.S > _match.s
+       $(CC) -c _match.s
+       mv _match.o match.o
+       rm -f _match.s
+
+match.lo: match.S
+       $(CPP) match.S > _match.s
+       $(CC) -c -fPIC _match.s
+       mv _match.o match.lo
+       rm -f _match.s
+
+example.o: $(SRCDIR)test/example.c $(SRCDIR)zlib.h zconf.h
+       $(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/example.c
+
+minigzip.o: $(SRCDIR)test/minigzip.c $(SRCDIR)zlib.h zconf.h
+       $(CC) $(CFLAGS) $(ZINCOUT) -c -o $@ $(SRCDIR)test/minigzip.c
+
+example64.o: $(SRCDIR)test/example.c $(SRCDIR)zlib.h zconf.h
+       $(CC) $(CFLAGS) $(ZINCOUT) -D_FILE_OFFSET_BITS=64 -c -o $@ 
$(SRCDIR)test/example.c
+
+minigzip64.o: $(SRCDIR)test/minigzip.c $(SRCDIR)zlib.h zconf.h
+       $(CC) $(CFLAGS) $(ZINCOUT) -D_FILE_OFFSET_BITS=64 -c -o $@ 
$(SRCDIR)test/minigzip.c
+
+
+adler32.o: $(SRCDIR)adler32.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)adler32.c
+
+crc32.o: $(SRCDIR)crc32.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)crc32.c
+
+deflate.o: $(SRCDIR)deflate.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)deflate.c
+
+infback.o: $(SRCDIR)infback.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)infback.c
+
+inffast.o: $(SRCDIR)inffast.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inffast.c
+
+inflate.o: $(SRCDIR)inflate.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inflate.c
+
+inftrees.o: $(SRCDIR)inftrees.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)inftrees.c
+
+trees.o: $(SRCDIR)trees.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)trees.c
+
+zutil.o: $(SRCDIR)zutil.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)zutil.c
+
+compress.o: $(SRCDIR)compress.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)compress.c
+
+uncompr.o: $(SRCDIR)uncompr.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)uncompr.c
+
+gzclose.o: $(SRCDIR)gzclose.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzclose.c
+
+gzlib.o: $(SRCDIR)gzlib.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzlib.c
+
+gzread.o: $(SRCDIR)gzread.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzread.c
+
+gzwrite.o: $(SRCDIR)gzwrite.c
+       $(CC) $(CFLAGS) $(ZINC) -c -o $@ $(SRCDIR)gzwrite.c
+
+
+adler32.lo: $(SRCDIR)adler32.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/adler32.o $(SRCDIR)adler32.c
+       -@mv objs/adler32.o $@
+
+crc32.lo: $(SRCDIR)crc32.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/crc32.o $(SRCDIR)crc32.c
+       -@mv objs/crc32.o $@
+
+deflate.lo: $(SRCDIR)deflate.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/deflate.o $(SRCDIR)deflate.c
+       -@mv objs/deflate.o $@
+
+infback.lo: $(SRCDIR)infback.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/infback.o $(SRCDIR)infback.c
+       -@mv objs/infback.o $@
+
+inffast.lo: $(SRCDIR)inffast.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inffast.o $(SRCDIR)inffast.c
+       -@mv objs/inffast.o $@
+
+inflate.lo: $(SRCDIR)inflate.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inflate.o $(SRCDIR)inflate.c
+       -@mv objs/inflate.o $@
+
+inftrees.lo: $(SRCDIR)inftrees.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/inftrees.o $(SRCDIR)inftrees.c
+       -@mv objs/inftrees.o $@
+
+trees.lo: $(SRCDIR)trees.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/trees.o $(SRCDIR)trees.c
+       -@mv objs/trees.o $@
+
+zutil.lo: $(SRCDIR)zutil.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/zutil.o $(SRCDIR)zutil.c
+       -@mv objs/zutil.o $@
+
+compress.lo: $(SRCDIR)compress.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/compress.o $(SRCDIR)compress.c
+       -@mv objs/compress.o $@
+
+uncompr.lo: $(SRCDIR)uncompr.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/uncompr.o $(SRCDIR)uncompr.c
+       -@mv objs/uncompr.o $@
+
+gzclose.lo: $(SRCDIR)gzclose.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzclose.o $(SRCDIR)gzclose.c
+       -@mv objs/gzclose.o $@
+
+gzlib.lo: $(SRCDIR)gzlib.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzlib.o $(SRCDIR)gzlib.c
+       -@mv objs/gzlib.o $@
+
+gzread.lo: $(SRCDIR)gzread.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzread.o $(SRCDIR)gzread.c
+       -@mv objs/gzread.o $@
+
+gzwrite.lo: $(SRCDIR)gzwrite.c
+       -@mkdir objs 2>/dev/null || test -d objs
+       $(CC) $(SFLAGS) $(ZINC) -DPIC -c -o objs/gzwrite.o $(SRCDIR)gzwrite.c
+       -@mv objs/gzwrite.o $@
+
+
+placebo $(SHAREDLIBV): $(PIC_OBJS) libz.a
+       $(LDSHARED) $(SFLAGS) -o $@ $(PIC_OBJS) $(LDSHAREDLIBC) $(LDFLAGS)
+       rm -f $(SHAREDLIB) $(SHAREDLIBM)
+       ln -s $@ $(SHAREDLIB)
+       ln -s $@ $(SHAREDLIBM)
+       -@rmdir objs
+
+example$(EXE): example.o $(STATICLIB)
+       $(CC) $(CFLAGS) -o $@ example.o $(TEST_LDFLAGS)
+
+minigzip$(EXE): minigzip.o $(STATICLIB)
+       $(CC) $(CFLAGS) -o $@ minigzip.o $(TEST_LDFLAGS)
+
+examplesh$(EXE): example.o $(SHAREDLIBV)
+       $(CC) $(CFLAGS) -o $@ example.o -L. $(SHAREDLIBV)
+
+minigzipsh$(EXE): minigzip.o $(SHAREDLIBV)
+       $(CC) $(CFLAGS) -o $@ minigzip.o -L. $(SHAREDLIBV)
+
+example64$(EXE): example64.o $(STATICLIB)
+       $(CC) $(CFLAGS) -o $@ example64.o $(TEST_LDFLAGS)
+
+minigzip64$(EXE): minigzip64.o $(STATICLIB)
+       $(CC) $(CFLAGS) -o $@ minigzip64.o $(TEST_LDFLAGS)
+
+install-libs: $(LIBS)
+       -@if [ ! -d $(DESTDIR)$(exec_prefix)  ]; then mkdir -p 
$(DESTDIR)$(exec_prefix); fi
+       -@if [ ! -d $(DESTDIR)$(libdir)       ]; then mkdir -p 
$(DESTDIR)$(libdir); fi
+       -@if [ ! -d $(DESTDIR)$(sharedlibdir) ]; then mkdir -p 
$(DESTDIR)$(sharedlibdir); fi
+       -@if [ ! -d $(DESTDIR)$(man3dir)      ]; then mkdir -p 
$(DESTDIR)$(man3dir); fi
+       -@if [ ! -d $(DESTDIR)$(pkgconfigdir) ]; then mkdir -p 
$(DESTDIR)$(pkgconfigdir); fi
+       rm -f $(DESTDIR)$(libdir)/$(STATICLIB)
+       cp $(STATICLIB) $(DESTDIR)$(libdir)
+       chmod 644 $(DESTDIR)$(libdir)/$(STATICLIB)
+       -@($(RANLIB) $(DESTDIR)$(libdir)/libz.a || true) >/dev/null 2>&1
+       -@if test -n "$(SHAREDLIBV)"; then \
+         rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
+         cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir); \
+         echo "cp $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)"; \
+         chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV); \
+         echo "chmod 755 $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBV)"; \
+         rm -f $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB) 
$(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+         ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIB); \
+         ln -s $(SHAREDLIBV) $(DESTDIR)$(sharedlibdir)/$(SHAREDLIBM); \
+         ($(LDCONFIG) || true)  >/dev/null 2>&1; \
+       fi
+       rm -f $(DESTDIR)$(man3dir)/zlib.3
+       cp $(SRCDIR)zlib.3 $(DESTDIR)$(man3dir)
+       chmod 644 $(DESTDIR)$(man3dir)/zlib.3
+       rm -f $(DESTDIR)$(pkgconfigdir)/zlib.pc
+       cp zlib.pc $(DESTDIR)$(pkgconfigdir)
+       chmod 644 $(DESTDIR)$(pkgconfigdir)/zlib.pc
+# The ranlib in install is needed on NeXTSTEP which checks file times
+# ldconfig is for Linux
+
+install: install-libs
+       -@if [ ! -d $(DESTDIR)$(includedir)   ]; then mkdir -p 
$(DESTDIR)$(includedir); fi
+       rm -f $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
+       cp $(SRCDIR)zlib.h zconf.h $(DESTDIR)$(includedir)
+       chmod 644 $(DESTDIR)$(includedir)/zlib.h $(DESTDIR)$(includedir)/zconf.h
+
+uninstall:
+       cd $(DESTDIR)$(includedir) && rm -f zlib.h zconf.h
+       cd $(DESTDIR)$(libdir) && rm -f libz.a; \
+       if test -n "$(SHAREDLIBV)" -a -f $(SHAREDLIBV); then \
+         rm -f $(SHAREDLIBV) $(SHAREDLIB) $(SHAREDLIBM); \
+       fi
+       cd $(DESTDIR)$(man3dir) && rm -f zlib.3
+       cd $(DESTDIR)$(pkgconfigdir) && rm -f zlib.pc
+
+docs: zlib.3.pdf
+
+zlib.3.pdf: $(SRCDIR)zlib.3
+       groff -mandoc -f H -T ps $(SRCDIR)zlib.3 | ps2pdf - $@
+
+zconf.h.cmakein: $(SRCDIR)zconf.h.in
+       -@ TEMPFILE=zconfh_$$; \
+       echo "/#define ZCONF_H/ a\\\\\n#cmakedefine Z_PREFIX\\\\\n#cmakedefine 
Z_HAVE_UNISTD_H\n" >> $$TEMPFILE &&\
+       sed -f $$TEMPFILE $(SRCDIR)zconf.h.in > $@ &&\
+       touch -r $(SRCDIR)zconf.h.in $@ &&\
+       rm $$TEMPFILE
+
+zconf: $(SRCDIR)zconf.h.in
+       cp -p $(SRCDIR)zconf.h.in zconf.h
+
+mostlyclean: clean
+clean:
+       rm -f *.o *.lo *~ \
+          example$(EXE) minigzip$(EXE) examplesh$(EXE) minigzipsh$(EXE) \
+          example64$(EXE) minigzip64$(EXE) \
+          infcover \
+          libz.* foo.gz so_locations \
+          _match.s maketree contrib/infback9/*.o
+       rm -rf objs
+       rm -f *.gcda *.gcno *.gcov
+       rm -f contrib/infback9/*.gcda contrib/infback9/*.gcno 
contrib/infback9/*.gcov
+
+maintainer-clean: distclean
+distclean: clean zconf zconf.h.cmakein docs
+       rm -f Makefile zlib.pc configure.log
+       -@rm -f .DS_Store
+       @if [ -f Makefile.in ]; then \
+       printf 'all:\n\t-@echo "Please use ./configure first.  Thank you."\n' > 
Makefile ; \
+       printf '\ndistclean:\n\tmake -f Makefile.in distclean\n' >> Makefile ; \
+       touch -r $(SRCDIR)Makefile.in Makefile ; fi
+       @if [ ! -f zconf.h.in ]; then rm -f zconf.h zconf.h.cmakein ; fi
+       @if [ ! -f zlib.3 ]; then rm -f zlib.3.pdf ; fi
+
+tags:
+       etags $(SRCDIR)*.[ch]
+
+adler32.o zutil.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
+gzclose.o gzlib.o gzread.o gzwrite.o: $(SRCDIR)zlib.h zconf.h $(SRCDIR)gzguts.h
+compress.o example.o minigzip.o uncompr.o: $(SRCDIR)zlib.h zconf.h
+crc32.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)crc32.h
+deflate.o: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
+infback.o inflate.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h 
$(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h $(SRCDIR)inffixed.h
+inffast.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h 
$(SRCDIR)inflate.h $(SRCDIR)inffast.h
+inftrees.o: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h
+trees.o: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h 
$(SRCDIR)trees.h
+
+adler32.lo zutil.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
+gzclose.lo gzlib.lo gzread.lo gzwrite.lo: $(SRCDIR)zlib.h zconf.h 
$(SRCDIR)gzguts.h
+compress.lo example.lo minigzip.lo uncompr.lo: $(SRCDIR)zlib.h zconf.h
+crc32.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)crc32.h
+deflate.lo: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h
+infback.lo inflate.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h 
$(SRCDIR)inftrees.h $(SRCDIR)inflate.h $(SRCDIR)inffast.h $(SRCDIR)inffixed.h
+inffast.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h 
$(SRCDIR)inflate.h $(SRCDIR)inffast.h
+inftrees.lo: $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h $(SRCDIR)inftrees.h
+trees.lo: $(SRCDIR)deflate.h $(SRCDIR)zutil.h $(SRCDIR)zlib.h zconf.h 
$(SRCDIR)trees.h


Property changes on: 
brlcad/branches/extbuild/src/other/ext/tcl/compat/zlib/Makefile.in
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: brlcad/branches/extbuild/src/other/ext/tcl/pkgs/itcl4.2.0/Makefile.in
===================================================================
--- brlcad/branches/extbuild/src/other/ext/tcl/pkgs/itcl4.2.0/Makefile.in       
                        (rev 0)
+++ brlcad/branches/extbuild/src/other/ext/tcl/pkgs/itcl4.2.0/Makefile.in       
2020-10-23 15:47:03 UTC (rev 77613)
@@ -0,0 +1,472 @@
+# Makefile.in --
+#
+#      This file is a Makefile for Sample TEA Extension.  If it has the name
+#      "Makefile.in" then it is a template for a Makefile;  to generate the
+#      actual Makefile, run "./configure", which is a configuration script
+#      generated by the "autoconf" program (constructs like "@foo@" will get
+#      replaced in the actual Makefile.
+#
+# Copyright (c) 1999 Scriptics Corporation.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+
+#========================================================================
+# Add additional lines to handle any additional AC_SUBST cases that
+# have been added in a customized configure script.
+#========================================================================
+
+#SAMPLE_NEW_VAR        = @SAMPLE_NEW_VAR@
+
+#========================================================================
+# Nothing of the variables below this line should need to be changed.
+# Please check the TARGETS section below to make sure the make targets
+# are correct.
+#========================================================================
+
+#========================================================================
+# The names of the source files is defined in the configure script.
+# The object files are used for linking into the final library.
+# This will be used when a dist target is added to the Makefile.
+# It is not important to specify the directory, as long as it is the
+# $(srcdir) or in the generic, win or unix subdirectory.
+#========================================================================
+
+PKG_SOURCES    = @PKG_SOURCES@
+PKG_OBJECTS    = @PKG_OBJECTS@
+
+PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
+PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
+
+#========================================================================
+# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
+# this package that need to be installed, if any.
+#========================================================================
+
+PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
+
+#========================================================================
+# This is a list of header files to be installed
+# itk.h includes itclInt.h, which needs itclIntDecls.h,
+# so we must install them.
+#========================================================================
+
+PKG_HEADERS    = @PKG_HEADERS@
+
+#========================================================================
+# "PKG_LIB_FILE" refers to the library (dynamic or static as per
+# configuration options) composed of the named objects.
+#========================================================================
+
+PKG_LIB_FILE   = @PKG_LIB_FILE@
+PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
+
+lib_BINARIES   = $(PKG_LIB_FILE) $(PKG_STUB_LIB_FILE)
+BINARIES       = $(lib_BINARIES)
+
+SHELL          = @SHELL@
+
+srcdir         = @srcdir@
+prefix         = @prefix@
+exec_prefix    = @exec_prefix@
+
+bindir         = @bindir@
+libdir         = @libdir@
+includedir     = @includedir@
+datarootdir    = @datarootdir@
+datadir                = @datadir@
+mandir         = @mandir@
+
+DESTDIR                =
+
+PKG_DIR                = $(PACKAGE_NAME)$(PACKAGE_VERSION)
+pkgdatadir     = $(datadir)/$(PKG_DIR)
+pkglibdir      = $(libdir)/$(PKG_DIR)
+pkgincludedir  = $(includedir)/$(PKG_DIR)
+
+top_builddir   = @abs_top_builddir@
+
+INSTALL_OPTIONS        =
+INSTALL                = @INSTALL@ $(INSTALL_OPTIONS)
+INSTALL_DATA_DIR = @INSTALL_DATA_DIR@
+INSTALL_DATA   = @INSTALL_DATA@
+INSTALL_PROGRAM        = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_LIBRARY        = @INSTALL_LIBRARY@
+
+PACKAGE_NAME   = @PACKAGE_NAME@
+PACKAGE_VERSION        = @PACKAGE_VERSION@
+CC             = @CC@
+CFLAGS_DEFAULT = @CFLAGS_DEFAULT@
+CFLAGS_WARNING = @CFLAGS_WARNING@
+EXEEXT         = @EXEEXT@
+LDFLAGS_DEFAULT        = @LDFLAGS_DEFAULT@
+MAKE_LIB       = @MAKE_LIB@
+MAKE_SHARED_LIB        = @MAKE_SHARED_LIB@
+MAKE_STATIC_LIB        = @MAKE_STATIC_LIB@
+MAKE_STUB_LIB  = @MAKE_STUB_LIB@
+OBJEXT         = @OBJEXT@
+RANLIB         = @RANLIB@
+RANLIB_STUB    = @RANLIB_STUB@
+SHLIB_CFLAGS   = @SHLIB_CFLAGS@
+SHLIB_LD       = @SHLIB_LD@
+SHLIB_LD_LIBS  = @SHLIB_LD_LIBS@
+STLIB_LD       = @STLIB_LD@
+#TCL_DEFS      = @TCL_DEFS@
+TCL_BIN_DIR    = @TCL_BIN_DIR@
+TCL_SRC_DIR    = @TCL_SRC_DIR@
+#TK_BIN_DIR    = @TK_BIN_DIR@
+#TK_SRC_DIR    = @TK_SRC_DIR@
+
+# Not used, but retained for reference of what libs Tcl required
+#TCL_LIBS      = @TCL_LIBS@
+
+#========================================================================
+# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
+# package without installing.  The other environment variables allow us
+# to test against an uninstalled Tcl.  Add special env vars that you
+# require for testing here (like TCLX_LIBRARY).
+#========================================================================
+
+EXTRA_PATH     = $(top_builddir):$(TCL_BIN_DIR)
+#EXTRA_PATH    = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
+TCLLIBPATH     = $(top_builddir)
+TCLSH_ENV      = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library`
+PKG_ENV                = 
@LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
+                 PATH="$(EXTRA_PATH):$(PATH)" \
+                 ITCL_LIBRARY=`@CYGPATH@ $(srcdir)/library` \
+                 TCLLIBPATH="$(TCLLIBPATH)"
+
+TCLSH_PROG     = @TCLSH_PROG@
+TCLSH          = $(TCLSH_ENV) $(PKG_ENV) $(TCLSH_PROG)
+
+TESTLOADARG = if {[catch {package present ${PACKAGE_NAME}}]} {package forget 
${PACKAGE_NAME}}; \
+                   package ifneeded ${PACKAGE_NAME} ${PACKAGE_VERSION} \
+                       [list load `@CYGPATH@ $(top_builddir)/$(PKG_LIB_FILE)` 
$(PACKAGE_NAME)]
+
+#WISH_ENV      = TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
+#WISH_PROG     = @WISH_PROG@
+#WISH          = $(PKG_ENV) $(TCLSH_ENV) $(WISH_ENV) $(WISH_PROG)
+
+SHARED_BUILD   = @SHARED_BUILD@
+STUBS_BUILD    = @STUBS_BUILD@
+
+INCLUDES       = @PKG_INCLUDES@ @TCL_INCLUDES@
+#INCLUDES      = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
+
+PKG_CFLAGS     = @PKG_CFLAGS@
+
+# TCL_DEFS is not strictly need here, but if you remove it, then you
+# must make sure that configure.ac checks for the necessary components
+# that your library may use.  TCL_DEFS can actually be a problem if
+# you do not compile with a similar machine setup as the Tcl core was
+# compiled with.
+#DEFS          = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
+DEFS           = @DEFS@ $(PKG_CFLAGS) -DITCL_LIBRARY=\"$(pkglibdir)\"
+
+# Move pkgIndex.tcl to 'BINARIES' var if it is generated in the Makefile
+CONFIG_CLEAN_FILES = @CONFIG_CLEAN_FILES@ Makefile itclConfig.sh pkgIndex.tcl
+CLEANFILES     = @CLEANFILES@
+
+CPPFLAGS       = @CPPFLAGS@
+LIBS           = @PKG_LIBS@ @LIBS@
+AR             = @AR@
+CFLAGS         = @CFLAGS@ -DTCL_NO_DEPRECATED
+COMPILE                = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) 
$(AM_CFLAGS) $(CFLAGS)
+
+GDB            = gdb
+VALGRIND       = valgrind
+VALGRINDARGS   = --tool=memcheck --num-callers=8 --leak-resolution=high \
+                 --leak-check=yes --show-reachable=yes -v
+
+.SUFFIXES: .c .$(OBJEXT)
+
+#========================================================================
+# Start of user-definable TARGETS section
+#========================================================================
+
+#========================================================================
+# TEA TARGETS.  Please note that the "libraries:" target refers to platform
+# independent files, and the "binaries:" target includes executable programs 
and
+# platform-dependent libraries.  Modify these targets so that they install
+# the various pieces of your package.  The make and install rules
+# for the BINARIES that you specified above have already been done.
+#========================================================================
+
+all: binaries libraries doc
+
+#========================================================================
+# The binaries target builds executable programs, Windows .dll's, unix
+# shared/static libraries, and any other platform-dependent files.
+# The list of targets to build for "binaries:" is specified at the top
+# of the Makefile, in the "BINARIES" variable.
+#========================================================================
+
+binaries: $(BINARIES)
+
+libraries:
+
+#========================================================================
+# Your doc target should differentiate from doc builds (by the developer)
+# and doc installs (see install-doc), which just install the docs on the
+# end user machine when building from source.
+#========================================================================
+
+doc:
+
+install: all install-binaries install-libraries install-doc
+
+install-binaries: binaries install-lib-binaries install-bin-binaries
+
+#========================================================================
+# This rule installs platform-independent files, such as header files.
+# The list=...; for p in $$list handles the empty list case x-platform.
+#========================================================================
+
+install-libraries: libraries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(includedir)
+       @echo "Installing header files in $(DESTDIR)$(includedir)"
+       @list='$(PKG_HEADERS)'; for i in $$list; do \
+           echo "Installing $(srcdir)/$$i" ; \
+           $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
+       done;
+
+#========================================================================
+# Install documentation.  Unix manpages should go in the $(mandir)
+# directory.
+#========================================================================
+
+install-doc: doc
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(mandir)/mann
+       @echo "Installing documentation in $(DESTDIR)$(mandir)"
+       @list='$(srcdir)/doc/*.n'; for i in $$list; do \
+           if test X"$$i" = X'$(srcdir)/doc/*.n'; then break; fi; \
+           bi=`basename $$i`; \
+           echo "Installing $$bi"; \
+           sed -e '/man\.macros/r $(srcdir)/doc/man.macros' -e 
'/man\.macros/d' $$i > $$bi.tmp \
+           && $(INSTALL_DATA) $$bi.tmp $(DESTDIR)$(mandir)/mann/$$bi \
+           && rm -f $$bi.tmp; \
+       done
+
+test: binaries libraries
+       $(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) -load 
"$(TESTLOADARG)"
+
+shell: binaries libraries
+       @$(TCLSH) $(SCRIPT)
+
+gdb:
+       $(TCLSH_ENV) $(PKG_ENV) $(GDB) $(TCLSH_PROG) $(SCRIPT)
+
+gdb-test: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(GDB) \
+           --args $(TCLSH_PROG) `@CYGPATH@ $(srcdir)/tests/all.tcl` \
+           $(TESTFLAGS) -singleproc 1 -load "$(TESTLOADARG)"
+
+valgrind: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(VALGRIND) $(VALGRINDARGS) $(TCLSH_PROG) \
+           `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)
+
+valgrindshell: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(VALGRIND) $(VALGRINDARGS) $(TCLSH_PROG) 
$(SCRIPT)
+
+depend:
+
+genstubs: $(srcdir)/tools/genStubs.tcl $(srcdir)/generic/itcl.decls
+       $(TCLSH) $(srcdir)/tools/genStubs.tcl $(srcdir)/generic 
$(srcdir)/generic/itcl.decls
+
+#========================================================================
+# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
+# mentioned above.  That will ensure that this target is built when you
+# run "make binaries".
+#
+# The $(PKG_OBJECTS) objects are created and linked into the final
+# library.  In most cases these object files will correspond to the
+# source files above.
+#========================================================================
+
+$(PKG_LIB_FILE): $(PKG_OBJECTS)
+       -rm -f $(PKG_LIB_FILE)
+       ${MAKE_LIB}
+       $(RANLIB) $(PKG_LIB_FILE)
+
+$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
+       -rm -f $(PKG_STUB_LIB_FILE)
+       ${MAKE_STUB_LIB}
+       $(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
+
+#========================================================================
+# We need to enumerate the list of .c to .o lines here.
+#
+# In the following lines, $(srcdir) refers to the toplevel directory
+# containing your extension.  If your sources are in a subdirectory,
+# you will have to modify the paths to reflect this:
+#
+# sample.$(OBJEXT): $(srcdir)/generic/sample.c
+#      $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
+#
+# Setting the VPATH variable to a list of paths will cause the makefile
+# to look into these paths when resolving .c to .obj dependencies.
+# As necessary, add $(srcdir):$(srcdir)/compat:....
+#========================================================================
+
+VPATH = 
$(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win:$(srcdir)/macosx
+
+.c.@OBJEXT@:
+       $(COMPILE) -c `@CYGPATH@ $<` -o $@
+
+#========================================================================
+# Distribution creation
+# You may need to tweak this target to make it work correctly.
+#========================================================================
+
+#COMPRESS      = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
+COMPRESS       = tar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
+DIST_ROOT      = /tmp/dist
+DIST_DIR       = $(DIST_ROOT)/$(PKG_DIR)
+
+DIST_INSTALL_DATA      = CPPROG='cp -p' $(INSTALL) -m 644
+DIST_INSTALL_SCRIPT    = CPPROG='cp -p' $(INSTALL) -m 755
+
+dist-clean:
+       rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
+
+dist: dist-clean doc
+       $(INSTALL_DATA_DIR) $(DIST_DIR)
+
+       # TEA files
+       $(DIST_INSTALL_DATA) $(srcdir)/Makefile.in \
+           $(srcdir)/aclocal.m4 $(srcdir)/configure.ac \
+           $(DIST_DIR)/
+       $(DIST_INSTALL_SCRIPT) $(srcdir)/configure $(DIST_DIR)/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/tclconfig
+       $(DIST_INSTALL_DATA) $(srcdir)/tclconfig/README.txt \
+           $(srcdir)/tclconfig/tcl.m4 $(srcdir)/tclconfig/install-sh \
+           $(DIST_DIR)/tclconfig/
+
+       # Extension files
+       $(DIST_INSTALL_DATA) \
+           $(srcdir)/ChangeLog \
+           $(srcdir)/license.terms \
+           $(srcdir)/README \
+           $(srcdir)/pkgIndex.tcl.in \
+           $(srcdir)/itclConfig.sh.in \
+           $(srcdir)/TODO $(srcdir)/releasenotes.txt \
+           $(srcdir)/.project \
+           $(DIST_DIR)/
+
+       list='doc generic library tests tools win'; \
+       for p in $$list; do \
+           if test -d $(srcdir)/$$p ; then \
+               $(INSTALL_DATA_DIR) $(DIST_DIR)/$$p; \
+               for q in $(srcdir)/$$p/*; do \
+                   if test -f $$q ; then \
+                       $(DIST_INSTALL_DATA) $$q $(DIST_DIR)/$$p/; \
+                   fi; \
+               done; \
+           fi; \
+       done
+
+       (cd $(DIST_ROOT); $(COMPRESS);)
+
+#========================================================================
+# End of user-definable section
+#========================================================================
+
+#========================================================================
+# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
+# variable in configure.ac
+#========================================================================
+
+clean:
+       -test -z "$(BINARIES)" || rm -f $(BINARIES)
+       -rm -f *.$(OBJEXT) core *.core
+       -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean: clean
+       -rm -f *.tab.c
+       -rm -f $(CONFIG_CLEAN_FILES)
+       -rm -f config.cache config.log config.status
+
+#========================================================================
+# Install binary object libraries.  On Windows this includes both .dll and
+# .lib files.  Because the .lib files are not explicitly listed anywhere,
+# we need to deduce their existence from the .dll file of the same name.
+# Library files go into the lib directory.
+# In addition, this will generate the pkgIndex.tcl
+# file in the install location (assuming it can find a usable tclsh shell)
+#
+# You should not have to modify this target.
+#========================================================================
+
+install-lib-binaries: binaries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(pkglibdir)
+       @list='$(lib_BINARIES)'; for p in $$list; do \
+         if test -f $$p; then \
+           echo " $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
+           $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p; \
+           ext=`echo $$p|sed -e "s/.*\.//"`; \
+           if test "x$$ext" = "xdll"; then \
+               lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
+               if test -f $$lib; then \
+                   echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; 
\
+                   $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
+               fi; \
+           fi; \
+         fi; \
+       done
+       @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+         if test -f $(srcdir)/$$p; then \
+           destp=`basename $$p`; \
+           echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
+           $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
+         fi; \
+       done
+       @if test "x$(SHARED_BUILD)" = "x1"; then \
+           echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
+           $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
+       fi
+       $(INSTALL_DATA) itclConfig.sh $(DESTDIR)$(pkglibdir)
+
+#========================================================================
+# Install binary executables (e.g. .exe files and dependent .dll files)
+# This is for files that must go in the bin directory (located next to
+# wish and tclsh), like dependent .dll files on Windows.
+#
+# You should not have to modify this target, except to define bin_BINARIES
+# above if necessary.
+#========================================================================
+
+install-bin-binaries: binaries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(bindir)
+       @list='$(bin_BINARIES)'; for p in $$list; do \
+         if test -f $$p; then \
+           echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
+           $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
+         fi; \
+       done
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
+       cd $(top_builddir) \
+         && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+uninstall-binaries:
+       list='$(lib_BINARIES)'; for p in $$list; do \
+         rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+       done
+       list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+         p=`basename $$p`; \
+         rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+       done
+       list='$(bin_BINARIES)'; for p in $$list; do \
+         rm -f $(DESTDIR)$(bindir)/$$p; \
+       done
+
+.PHONY: all binaries clean depend distclean doc install libraries test
+.PHONY: gdb gdb-test valgrind valgrindshell
+.PHONY: genstubs
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:


Property changes on: 
brlcad/branches/extbuild/src/other/ext/tcl/pkgs/itcl4.2.0/Makefile.in
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbc1.1.1/Makefile.in
===================================================================
--- brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbc1.1.1/Makefile.in       
                        (rev 0)
+++ brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbc1.1.1/Makefile.in       
2020-10-23 15:47:03 UTC (rev 77613)
@@ -0,0 +1,496 @@
+# Makefile.in --
+#
+#      This file is a Makefile for Sample TEA Extension.  If it has the name
+#      "Makefile.in" then it is a template for a Makefile;  to generate the
+#      actual Makefile, run "./configure", which is a configuration script
+#      generated by the "autoconf" program (constructs like "@foo@" will get
+#      replaced in the actual Makefile.
+#
+# Copyright (c) 1999 Scriptics Corporation.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+
+#========================================================================
+# Add additional lines to handle any additional AC_SUBST cases that
+# have been added in a customized configure script.
+#========================================================================
+
+#SAMPLE_NEW_VAR        = @SAMPLE_NEW_VAR@
+
+#========================================================================
+# Nothing of the variables below this line should need to be changed.
+# Please check the TARGETS section below to make sure the make targets
+# are correct.
+#========================================================================
+
+#========================================================================
+# The names of the source files is defined in the configure script.
+# The object files are used for linking into the final library.
+# This will be used when a dist target is added to the Makefile.
+# It is not important to specify the directory, as long as it is the
+# $(srcdir) or in the generic, win or unix subdirectory.
+#========================================================================
+
+PKG_SOURCES    = @PKG_SOURCES@
+PKG_OBJECTS    = @PKG_OBJECTS@
+
+PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
+PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
+
+#========================================================================
+# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
+# this package that need to be installed, if any.
+#========================================================================
+
+PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
+
+#========================================================================
+# This is a list of public header files to be installed, if any.
+#========================================================================
+
+PKG_HEADERS    = @PKG_HEADERS@
+
+#========================================================================
+# "PKG_LIB_FILE" refers to the library (dynamic or static as per
+# configuration options) composed of the named objects.
+#========================================================================
+
+PKG_LIB_FILE   = @PKG_LIB_FILE@
+PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
+
+lib_BINARIES   = $(PKG_LIB_FILE) $(PKG_STUB_LIB_FILE)
+BINARIES       = $(lib_BINARIES)
+
+SHELL          = @SHELL@
+
+srcdir         = @srcdir@
+prefix         = @prefix@
+exec_prefix    = @exec_prefix@
+
+bindir         = @bindir@
+libdir         = @libdir@
+includedir     = @includedir@
+datarootdir    = @datarootdir@
+datadir                = @datadir@
+mandir         = @mandir@
+
+DESTDIR                =
+
+PKG_DIR                = $(PACKAGE_NAME)$(PACKAGE_VERSION)
+pkgdatadir     = $(datadir)/$(PKG_DIR)
+pkglibdir      = $(libdir)/$(PKG_DIR)
+pkgincludedir  = $(includedir)/$(PKG_DIR)
+
+top_builddir   = @abs_top_builddir@
+
+INSTALL_OPTIONS        =
+INSTALL                = @INSTALL@ $(INSTALL_OPTIONS)
+INSTALL_DATA_DIR = @INSTALL_DATA_DIR@
+INSTALL_DATA   = @INSTALL_DATA@
+INSTALL_PROGRAM        = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_LIBRARY        = @INSTALL_LIBRARY@
+
+PACKAGE_NAME   = @PACKAGE_NAME@
+PACKAGE_VERSION        = @PACKAGE_VERSION@
+CC             = @CC@
+CFLAGS_DEFAULT = @CFLAGS_DEFAULT@
+CFLAGS_WARNING = @CFLAGS_WARNING@
+EXEEXT         = @EXEEXT@
+LDFLAGS_DEFAULT        = @LDFLAGS_DEFAULT@
+MAKE_LIB       = @MAKE_LIB@
+MAKE_SHARED_LIB        = @MAKE_SHARED_LIB@
+MAKE_STATIC_LIB        = @MAKE_STATIC_LIB@
+MAKE_STUB_LIB  = @MAKE_STUB_LIB@
+OBJEXT         = @OBJEXT@
+RANLIB         = @RANLIB@
+RANLIB_STUB    = @RANLIB_STUB@
+SHLIB_CFLAGS   = @SHLIB_CFLAGS@
+SHLIB_LD       = @SHLIB_LD@
+SHLIB_LD_LIBS  = @SHLIB_LD_LIBS@
+STLIB_LD       = @STLIB_LD@
+#TCL_DEFS      = @TCL_DEFS@
+TCL_BIN_DIR    = @TCL_BIN_DIR@
+TCL_SRC_DIR    = @TCL_SRC_DIR@
+#TK_BIN_DIR    = @TK_BIN_DIR@
+#TK_SRC_DIR    = @TK_SRC_DIR@
+
+# Not used, but retained for reference of what libs Tcl required
+#TCL_LIBS      = @TCL_LIBS@
+
+#========================================================================
+# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
+# package without installing.  The other environment variables allow us
+# to test against an uninstalled Tcl.  Add special env vars that you
+# require for testing here (like TCLX_LIBRARY).
+#========================================================================
+
+EXTRA_PATH     = $(top_builddir):$(TCL_BIN_DIR)
+#EXTRA_PATH    = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
+TCLLIBPATH     = $(top_builddir)
+TCLSH_ENV      = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library`
+PKG_ENV                = 
@LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
+                 PATH="$(EXTRA_PATH):$(PATH)" \
+                 TDBC_LIBRARY=`@CYGPATH@ $(srcdir)/library` \
+                 TCLLIBPATH="$(TCLLIBPATH)"
+
+TCLSH_PROG     = @TCLSH_PROG@
+TCLSH          = $(TCLSH_ENV) $(PKG_ENV) $(TCLSH_PROG)
+
+#WISH_ENV      = TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
+#WISH_PROG     = @WISH_PROG@
+#WISH          = $(TCLSH_ENV) $(WISH_ENV) $(PKG_ENV) $(WISH_PROG)
+
+SHARED_BUILD   = @SHARED_BUILD@
+
+INCLUDES       = @PKG_INCLUDES@ @TCL_INCLUDES@
+#INCLUDES      = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
+
+PKG_CFLAGS     = @PKG_CFLAGS@
+
+# TCL_DEFS is not strictly need here, but if you remove it, then you
+# must make sure that configure.ac checks for the necessary components
+# that your library may use.  TCL_DEFS can actually be a problem if
+# you do not compile with a similar machine setup as the Tcl core was
+# compiled with.
+#DEFS          = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
+DEFS           = @DEFS@ $(PKG_CFLAGS)
+
+# Move pkgIndex.tcl to 'BINARIES' var if it is generated in the Makefile
+CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl tdbcConfig.sh
+CLEANFILES     = @CLEANFILES@
+
+CPPFLAGS       = @CPPFLAGS@
+LIBS           = @PKG_LIBS@ @LIBS@
+AR             = @AR@
+CFLAGS         = @CFLAGS@
+COMPILE                = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) 
$(AM_CFLAGS) $(CFLAGS)
+
+GDB            = gdb
+VALGRIND       = valgrind
+VALGRINDARGS   = --tool=memcheck --num-callers=8 --leak-resolution=high \
+                 --leak-check=yes --show-reachable=yes -v
+
+.SUFFIXES: .c .$(OBJEXT)
+
+#========================================================================
+# Start of user-definable TARGETS section
+#========================================================================
+
+#========================================================================
+# TEA TARGETS.  Please note that the "libraries:" target refers to platform
+# independent files, and the "binaries:" target includes executable programs 
and
+# platform-dependent libraries.  Modify these targets so that they install
+# the various pieces of your package.  The make and install rules
+# for the BINARIES that you specified above have already been done.
+#========================================================================
+
+all: binaries libraries doc
+
+#========================================================================
+# The binaries target builds executable programs, Windows .dll's, unix
+# shared/static libraries, and any other platform-dependent files.
+# The list of targets to build for "binaries:" is specified at the top
+# of the Makefile, in the "BINARIES" variable.
+#========================================================================
+
+binaries: $(BINARIES)
+
+libraries:
+
+#========================================================================
+# Your doc target should differentiate from doc builds (by the developer)
+# and doc installs (see install-doc), which just install the docs on the
+# end user machine when building from source.
+#========================================================================
+
+doc:
+
+install: all install-binaries install-libraries install-doc
+
+install-binaries: binaries install-lib-binaries install-bin-binaries
+
+#========================================================================
+# This rule installs platform-independent files, such as header files.
+# The list=...; for p in $$list handles the empty list case x-platform.
+#========================================================================
+
+install-libraries: libraries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(includedir)
+       @echo "Installing header files in $(DESTDIR)$(includedir)"
+       @list='$(PKG_HEADERS)'; for i in $$list; do \
+           echo "Installing $(srcdir)/$$i" ; \
+           $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
+       done;
+
+#========================================================================
+# Install documentation.  Unix manpages should go in the $(mandir)
+# directory.
+#========================================================================
+
+install-doc: doc
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(mandir)/man3 $(DESTDIR)$(mandir)/mann
+       @echo "Installing documentation in $(DESTDIR)$(mandir)"
+       @list='$(srcdir)/doc/*.3'; for i in $$list; do \
+           echo "Installing $$i"; \
+           $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/man3 ; \
+       done
+       @list='$(srcdir)/doc/*.n'; for i in $$list; do \
+           echo "Installing $$i"; \
+           $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
+       done
+
+test: binaries libraries
+       $(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)
+
+shell: binaries libraries
+       @$(TCLSH) $(SCRIPT)
+
+gdb:
+       $(TCLSH_ENV) $(PKG_ENV) $(GDB) $(TCLSH_PROG) $(SCRIPT)
+
+gdb-test: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(GDB) \
+           --args $(TCLSH_PROG) `@CYGPATH@ $(srcdir)/tests/all.tcl` \
+           $(TESTFLAGS) -singleproc 1 \
+           -load "package ifneeded $(PACKAGE_NAME) $(PACKAGE_VERSION) \
+               [list load `@CYGPATH@ $(PKG_LIB_FILE)` $(PACKAGE_NAME)]"
+
+valgrind: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(VALGRIND) $(VALGRINDARGS) $(TCLSH_PROG) \
+           `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)
+
+valgrindshell: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(VALGRIND) $(VALGRINDARGS) $(TCLSH_PROG) 
$(SCRIPT)
+
+depend:
+
+#========================================================================
+# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
+# mentioned above.  That will ensure that this target is built when you
+# run "make binaries".
+#
+# The $(PKG_OBJECTS) objects are created and linked into the final
+# library.  In most cases these object files will correspond to the
+# source files above.
+#========================================================================
+
+$(PKG_LIB_FILE): $(PKG_OBJECTS)
+       -rm -f $(PKG_LIB_FILE)
+       ${MAKE_LIB}
+       $(RANLIB) $(PKG_LIB_FILE)
+
+$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
+       -rm -f $(PKG_STUB_LIB_FILE)
+       ${MAKE_STUB_LIB}
+       $(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
+
+#========================================================================
+# We need to enumerate the list of .c to .o lines here.
+#
+# In the following lines, $(srcdir) refers to the toplevel directory
+# containing your extension.  If your sources are in a subdirectory,
+# you will have to modify the paths to reflect this:
+#
+# sample.$(OBJEXT): $(srcdir)/generic/sample.c
+#      $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
+#
+# Setting the VPATH variable to a list of paths will cause the makefile
+# to look into these paths when resolving .c to .obj dependencies.
+# As necessary, add $(srcdir):$(srcdir)/compat:....
+#========================================================================
+
+VPATH = 
$(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win:$(srcdir)/macosx
+
+.c.@OBJEXT@:
+       $(COMPILE) -c `@CYGPATH@ $<` -o $@
+
+#========================================================================
+# Distribution creation
+# You may need to tweak this target to make it work correctly.
+#========================================================================
+
+#COMPRESS      = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
+COMPRESS       = tar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
+DIST_ROOT      = /tmp/dist
+DIST_DIR       = $(DIST_ROOT)/$(PKG_DIR)
+
+DIST_INSTALL_DATA      = CPPROG='cp -p' $(INSTALL) -m 644
+DIST_INSTALL_SCRIPT    = CPPROG='cp -p' $(INSTALL) -m 755
+
+dist-clean:
+       rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
+
+dist: dist-clean
+       $(INSTALL_DATA_DIR) $(DIST_DIR)
+
+       # TEA files
+       $(DIST_INSTALL_DATA) $(srcdir)/Makefile.in \
+           $(srcdir)/aclocal.m4 $(srcdir)/configure.ac \
+           $(DIST_DIR)/
+       $(DIST_INSTALL_SCRIPT) $(srcdir)/configure $(DIST_DIR)/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/tclconfig
+       $(DIST_INSTALL_DATA) $(srcdir)/tclconfig/README.txt \
+           $(srcdir)/tclconfig/tcl.m4 $(srcdir)/tclconfig/install-sh \
+           $(DIST_DIR)/tclconfig/
+
+       # Extension files
+       $(DIST_INSTALL_DATA) \
+           $(srcdir)/ChangeLog \
+           $(srcdir)/license.terms \
+           $(srcdir)/README \
+           $(srcdir)/pkgIndex.tcl.in \
+           $(srcdir)/tdbcConfig.sh.in \
+           $(DIST_DIR)/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/doc
+       $(DIST_INSTALL_DATA) $(srcdir)/doc/tdbc.n \
+               $(srcdir)/doc/tdbc_connection.n \
+               $(srcdir)/doc/tdbc_resultset.n \
+               $(srcdir)/doc/tdbc_statement.n \
+               $(srcdir)/doc/tdbc_mapSqlState.n \
+               $(srcdir)/doc/tdbc_tokenize.n \
+               $(srcdir)/doc/Tdbc_Init.3 \
+               $(DIST_DIR)/doc/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/generic
+       $(DIST_INSTALL_DATA) $(srcdir)/generic/tdbc.c 
$(srcdir)/generic/tdbc.decls \
+               $(srcdir)/generic/tdbc.h $(srcdir)/generic/tdbcDecls.h \
+               $(srcdir)/generic/tdbcInt.h $(srcdir)/generic/tdbcStubInit.c \
+               $(srcdir)/generic/tdbcStubLib.c \
+               $(srcdir)/generic/tdbcTokenize.c $(DIST_DIR)/generic/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/library
+       $(DIST_INSTALL_DATA) $(srcdir)/library/tdbc.tcl $(DIST_DIR)/library/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/tests
+       $(DIST_INSTALL_DATA) $(srcdir)/tests/all.tcl \
+               $(srcdir)/tests/tdbc.test \
+               $(srcdir)/tests/tokenize.test \
+               $(DIST_DIR)/tests/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/tools
+       $(DIST_INSTALL_DATA) $(srcdir)/tools/genExtStubs.tcl \
+               $(srcdir)/tools/genStubs.tcl \
+               $(srcdir)/tools/tdbc-man2html.tcl \
+               $(DIST_DIR)/tools/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/win
+       $(DIST_INSTALL_DATA) $(srcdir)/win/makefile.vc $(srcdir)/win/nmakehlp.c 
\
+               $(srcdir)/win/targets.vc $(srcdir)/win/rules-ext.vc \
+               $(srcdir)/win/rules.vc $(srcdir)/win/tdbc.rc \
+               $(DIST_DIR)/win/
+
+       (cd $(DIST_ROOT); $(COMPRESS);)
+
+#========================================================================
+# How to rebuild the package's stub table.
+#========================================================================
+
+genstubs: $(srcdir)/tools/genStubs.tcl $(srcdir)/generic/tdbc.decls
+       @echo $(TCLSH_PROGRAM) $(srcdir)/tools/genStubs.tcl $(srcdir)/generic 
$(srcdir)/generic/tdbc.decls
+       @$(TCLSH) `@CYGPATH@ $(srcdir)/tools/genStubs.tcl` `@CYGPATH@ 
$(srcdir)/generic` `@CYGPATH@ $(srcdir)/generic/tdbc.decls`
+
+#========================================================================
+# End of user-definable section
+#========================================================================
+
+#========================================================================
+# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
+# variable in configure.ac
+#========================================================================
+
+clean:
+       -test -z "$(BINARIES)" || rm -f $(BINARIES)
+       -rm -f *.$(OBJEXT) core *.core
+       -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean: clean
+       -rm -f *.tab.c
+       -rm -f $(CONFIG_CLEAN_FILES)
+       -rm -f config.cache config.log config.status
+
+#========================================================================
+# Install binary object libraries.  On Windows this includes both .dll and
+# .lib files.  Because the .lib files are not explicitly listed anywhere,
+# we need to deduce their existence from the .dll file of the same name.
+# Library files go into the lib directory.
+# In addition, this will generate the pkgIndex.tcl
+# file in the install location (assuming it can find a usable tclsh shell)
+#
+# You should not have to modify this target.
+#========================================================================
+
+install-lib-binaries: binaries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(pkglibdir)
+       @list='$(lib_BINARIES)'; for p in $$list; do \
+         if test -f $$p; then \
+           echo " $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
+           $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p; \
+           ext=`echo $$p|sed -e "s/.*\.//"`; \
+           if test "x$$ext" = "xdll"; then \
+               lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
+               if test -f $$lib; then \
+                   echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; 
\
+                   $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
+               fi; \
+           fi; \
+         fi; \
+       done
+       @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+         if test -f $(srcdir)/$$p; then \
+           destp=`basename $$p`; \
+           echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
+           $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
+         fi; \
+       done
+       @if test "x$(SHARED_BUILD)" = "x1"; then \
+           echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
+           $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
+       fi
+       @echo " Install tdbcConfig.sh $(DESTDIR)$(pkglibdir)"; \
+       $(INSTALL_DATA) tdbcConfig.sh $(DESTDIR)$(pkglibdir)/tdbcConfig.sh
+
+#========================================================================
+# Install binary executables (e.g. .exe files and dependent .dll files)
+# This is for files that must go in the bin directory (located next to
+# wish and tclsh), like dependent .dll files on Windows.
+#
+# You should not have to modify this target, except to define bin_BINARIES
+# above if necessary.
+#========================================================================
+
+install-bin-binaries: binaries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(bindir)
+       @list='$(bin_BINARIES)'; for p in $$list; do \
+         if test -f $$p; then \
+           echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
+           $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
+         fi; \
+       done
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
+       cd $(top_builddir) \
+         && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+uninstall-binaries:
+       list='$(lib_BINARIES)'; for p in $$list; do \
+         rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+       done
+       list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+         p=`basename $$p`; \
+         rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+       done
+       list='$(bin_BINARIES)'; for p in $$list; do \
+         rm -f $(DESTDIR)$(bindir)/$$p; \
+       done
+
+.PHONY: all binaries clean depend distclean doc install libraries test
+.PHONY: gdb gdb-test valgrind valgrindshell
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:


Property changes on: 
brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbc1.1.1/Makefile.in
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: 
brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcmysql1.1.1/Makefile.in
===================================================================
--- brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcmysql1.1.1/Makefile.in  
                        (rev 0)
+++ brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcmysql1.1.1/Makefile.in  
2020-10-23 15:47:03 UTC (rev 77613)
@@ -0,0 +1,490 @@
+# Makefile.in --
+#
+#      This file is a Makefile for Sample TEA Extension.  If it has the name
+#      "Makefile.in" then it is a template for a Makefile;  to generate the
+#      actual Makefile, run "./configure", which is a configuration script
+#      generated by the "autoconf" program (constructs like "@foo@" will get
+#      replaced in the actual Makefile.
+#
+# Copyright (c) 1999 Scriptics Corporation.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+
+#========================================================================
+# Add additional lines to handle any additional AC_SUBST cases that
+# have been added in a customized configure script.
+#========================================================================
+
+#SAMPLE_NEW_VAR        = @SAMPLE_NEW_VAR@
+
+#========================================================================
+# Nothing of the variables below this line should need to be changed.
+# Please check the TARGETS section below to make sure the make targets
+# are correct.
+#========================================================================
+
+#========================================================================
+# The names of the source files is defined in the configure script.
+# The object files are used for linking into the final library.
+# This will be used when a dist target is added to the Makefile.
+# It is not important to specify the directory, as long as it is the
+# $(srcdir) or in the generic, win or unix subdirectory.
+#========================================================================
+
+PKG_SOURCES    = @PKG_SOURCES@
+PKG_OBJECTS    = @PKG_OBJECTS@
+
+PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
+PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
+
+#========================================================================
+# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
+# this package that need to be installed, if any.
+#========================================================================
+
+PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
+
+#========================================================================
+# This is a list of public header files to be installed, if any.
+#========================================================================
+
+PKG_HEADERS    = @PKG_HEADERS@
+
+#========================================================================
+# "PKG_LIB_FILE" refers to the library (dynamic or static as per
+# configuration options) composed of the named objects.
+#========================================================================
+
+PKG_LIB_FILE   = @PKG_LIB_FILE@
+PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
+
+lib_BINARIES   = $(PKG_LIB_FILE)
+BINARIES       = $(lib_BINARIES)
+
+SHELL          = @SHELL@
+
+srcdir         = @srcdir@
+prefix         = @prefix@
+exec_prefix    = @exec_prefix@
+
+bindir         = @bindir@
+libdir         = @libdir@
+includedir     = @includedir@
+datarootdir    = @datarootdir@
+datadir                = @datadir@
+mandir         = @mandir@
+
+DESTDIR                =
+
+PKG_DIR                = $(PACKAGE_NAME)$(PACKAGE_VERSION)
+pkgdatadir     = $(datadir)/$(PKG_DIR)
+pkglibdir      = $(libdir)/$(PKG_DIR)
+pkgincludedir  = $(includedir)/$(PKG_DIR)
+
+top_builddir   = @abs_top_builddir@
+
+INSTALL_OPTIONS        =
+INSTALL                = @INSTALL@ $(INSTALL_OPTIONS)
+INSTALL_DATA_DIR = @INSTALL_DATA_DIR@
+INSTALL_DATA   = @INSTALL_DATA@
+INSTALL_PROGRAM        = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_LIBRARY        = @INSTALL_LIBRARY@
+
+PACKAGE_NAME   = @PACKAGE_NAME@
+PACKAGE_VERSION        = @PACKAGE_VERSION@
+CC             = @CC@
+CFLAGS_DEFAULT = @CFLAGS_DEFAULT@
+CFLAGS_WARNING = @CFLAGS_WARNING@
+EXEEXT         = @EXEEXT@
+LDFLAGS_DEFAULT        = @LDFLAGS_DEFAULT@
+MAKE_LIB       = @MAKE_LIB@
+MAKE_SHARED_LIB        = @MAKE_SHARED_LIB@
+MAKE_STATIC_LIB        = @MAKE_STATIC_LIB@
+MAKE_STUB_LIB  = @MAKE_STUB_LIB@
+OBJEXT         = @OBJEXT@
+RANLIB         = @RANLIB@
+RANLIB_STUB    = @RANLIB_STUB@
+SHLIB_CFLAGS   = @SHLIB_CFLAGS@
+SHLIB_LD       = @SHLIB_LD@
+SHLIB_LD_LIBS  = @SHLIB_LD_LIBS@
+STLIB_LD       = @STLIB_LD@
+#TCL_DEFS      = @TCL_DEFS@
+TCL_BIN_DIR    = @TCL_BIN_DIR@
+TCL_SRC_DIR    = @TCL_SRC_DIR@
+#TK_BIN_DIR    = @TK_BIN_DIR@
+#TK_SRC_DIR    = @TK_SRC_DIR@
+
+TDBC_VERSION   = @TDBC_VERSION@
+TDBC_SRC_DIR   = @tdbc_SRC_DIR@
+TDBC_BIN_DIR   = @tdbc_BIN_DIR@
+TDBC_LIB_FILE  = @TDBC_LIB_FILE@
+
+# Not used, but retained for reference of what libs Tcl required
+#TCL_LIBS      = @TCL_LIBS@
+
+#========================================================================
+# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
+# package without installing.  The other environment variables allow us
+# to test against an uninstalled Tcl.  Add special env vars that you
+# require for testing here (like TCLX_LIBRARY).
+#========================================================================
+
+EXTRA_PATH     = $(top_builddir):$(TCL_BIN_DIR)
+#EXTRA_PATH    = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
+TCLLIBPATH     = $(top_builddir) $(TDBC_BIN_DIR)
+TCLSH_ENV      = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library`
+PKG_ENV                = 
@LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
+                 PATH="$(EXTRA_PATH):$(PATH)" \
+                 TDBC_LIBRARY=`@CYGPATH@ @tdbc_LIBRARY_PATH@` \
+                 TDBCMYSQL_LIBRARY=`@CYGPATH@ $(srcdir)/library` \
+                 TCLLIBPATH="$(TCLLIBPATH)"
+
+TCLSH_PROG     = @TCLSH_PROG@
+TCLSH          = $(TCLSH_ENV) $(PKG_ENV) $(TCLSH_PROG)
+
+#WISH_ENV      = TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
+#WISH_PROG     = @WISH_PROG@
+#WISH          = $(TCLSH_ENV) $(WISH_ENV) $(PKG_ENV) $(WISH_PROG)
+
+SHARED_BUILD   = @SHARED_BUILD@
+
+INCLUDES       = @PKG_INCLUDES@ @TCL_INCLUDES@
+#INCLUDES      = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
+
+PKG_CFLAGS     = @PKG_CFLAGS@
+
+# TCL_DEFS is not strictly need here, but if you remove it, then you
+# must make sure that configure.ac checks for the necessary components
+# that your library may use.  TCL_DEFS can actually be a problem if
+# you do not compile with a similar machine setup as the Tcl core was
+# compiled with.
+#DEFS          = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
+DEFS           = @DEFS@ $(PKG_CFLAGS)
+
+# Move pkgIndex.tcl to 'BINARIES' var if it is generated in the Makefile
+CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl
+CLEANFILES     = @CLEANFILES@
+
+CPPFLAGS       = @CPPFLAGS@
+LIBS           = @PKG_LIBS@ @LIBS@
+AR             = @AR@
+CFLAGS         = @CFLAGS@
+COMPILE                = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) 
$(AM_CFLAGS) $(CFLAGS)
+
+GDB            = gdb
+VALGRIND       = valgrind
+VALGRINDARGS   = --tool=memcheck --num-callers=8 --leak-resolution=high \
+                 --leak-check=yes --show-reachable=yes -v
+
+.SUFFIXES: .c .$(OBJEXT)
+
+#========================================================================
+# Start of user-definable TARGETS section
+#========================================================================
+
+#========================================================================
+# TEA TARGETS.  Please note that the "libraries:" target refers to platform
+# independent files, and the "binaries:" target includes executable programs 
and
+# platform-dependent libraries.  Modify these targets so that they install
+# the various pieces of your package.  The make and install rules
+# for the BINARIES that you specified above have already been done.
+#========================================================================
+
+all: binaries libraries doc
+
+#========================================================================
+# The binaries target builds executable programs, Windows .dll's, unix
+# shared/static libraries, and any other platform-dependent files.
+# The list of targets to build for "binaries:" is specified at the top
+# of the Makefile, in the "BINARIES" variable.
+#========================================================================
+
+binaries: $(BINARIES)
+
+libraries:
+
+#========================================================================
+# Your doc target should differentiate from doc builds (by the developer)
+# and doc installs (see install-doc), which just install the docs on the
+# end user machine when building from source.
+#========================================================================
+
+doc:
+
+install: all install-binaries install-libraries install-doc
+
+install-binaries: binaries install-lib-binaries install-bin-binaries
+
+#========================================================================
+# This rule installs platform-independent files, such as header files.
+# The list=...; for p in $$list handles the empty list case x-platform.
+#========================================================================
+
+install-libraries: libraries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(includedir)
+       @echo "Installing header files in $(DESTDIR)$(includedir)"
+       @list='$(PKG_HEADERS)'; for i in $$list; do \
+           echo "Installing $(srcdir)/$$i" ; \
+           $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
+       done;
+
+#========================================================================
+# Install documentation.  Unix manpages should go in the $(mandir)
+# directory.
+#========================================================================
+
+install-doc: doc
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(mandir)/mann
+       @echo "Installing documentation in $(DESTDIR)$(mandir)"
+       @list='$(srcdir)/doc/*.n'; for i in $$list; do \
+           echo "Installing $$i"; \
+           $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
+       done
+
+test: binaries libraries
+       @$(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) \
+               -load "package ifneeded tdbc::mysql $(PACKAGE_VERSION) \
+                       [list source `@CYGPATH@ 
$(srcdir)/library/tdbcmysql.tcl`]\;[list load `@CYGPATH@ $(PKG_LIB_FILE)` 
$(PACKAGE_NAME)]"
+
+shell: binaries libraries
+       @$(TCLSH) $(SCRIPT)
+
+gdb:
+       $(TCLSH_ENV) $(PKG_ENV) $(GDB) $(TCLSH_PROG) $(SCRIPT)
+
+gdb-test: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(GDB) \
+           --args $(TCLSH_PROG) `@CYGPATH@ $(srcdir)/tests/all.tcl` \
+           $(TESTFLAGS) -singleproc 1 \
+           -load "package ifneeded $(PACKAGE_NAME) $(PACKAGE_VERSION) \
+               [list load `@CYGPATH@ $(PKG_LIB_FILE)` $(PACKAGE_NAME)]"
+
+valgrind: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(VALGRIND) $(VALGRINDARGS) $(TCLSH_PROG) \
+           `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)
+
+valgrindshell: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(VALGRIND) $(VALGRINDARGS) $(TCLSH_PROG) 
$(SCRIPT)
+
+depend:
+
+#========================================================================
+# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
+# mentioned above.  That will ensure that this target is built when you
+# run "make binaries".
+#
+# The $(PKG_OBJECTS) objects are created and linked into the final
+# library.  In most cases these object files will correspond to the
+# source files above.
+#========================================================================
+
+$(PKG_LIB_FILE): $(PKG_OBJECTS)
+       -rm -f $(PKG_LIB_FILE)
+       ${MAKE_LIB}
+       $(RANLIB) $(PKG_LIB_FILE)
+
+$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
+       -rm -f $(PKG_STUB_LIB_FILE)
+       ${MAKE_STUB_LIB}
+       $(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
+
+#========================================================================
+# We need to enumerate the list of .c to .o lines here.
+#
+# In the following lines, $(srcdir) refers to the toplevel directory
+# containing your extension.  If your sources are in a subdirectory,
+# you will have to modify the paths to reflect this:
+#
+# sample.$(OBJEXT): $(srcdir)/generic/sample.c
+#      $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
+#
+# Setting the VPATH variable to a list of paths will cause the makefile
+# to look into these paths when resolving .c to .obj dependencies.
+# As necessary, add $(srcdir):$(srcdir)/compat:....
+#========================================================================
+
+VPATH = 
$(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win:$(srcdir)/macosx
+
+.c.@OBJEXT@:
+       $(COMPILE) -c `@CYGPATH@ $<` -o $@
+
+#========================================================================
+# Distribution creation
+# You may need to tweak this target to make it work correctly.
+#========================================================================
+
+#COMPRESS      = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
+COMPRESS       = tar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
+DIST_ROOT      = /tmp/dist
+DIST_DIR       = $(DIST_ROOT)/$(PKG_DIR)
+
+DIST_INSTALL_DATA      = CPPROG='cp -p' $(INSTALL) -m 644
+DIST_INSTALL_SCRIPT    = CPPROG='cp -p' $(INSTALL) -m 755
+
+dist-clean:
+       rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
+
+dist: dist-clean
+       $(INSTALL_DATA_DIR) $(DIST_DIR)
+
+       # TEA files
+       $(DIST_INSTALL_DATA) $(srcdir)/Makefile.in \
+           $(srcdir)/aclocal.m4 $(srcdir)/configure.ac \
+           $(DIST_DIR)/
+       $(DIST_INSTALL_SCRIPT) $(srcdir)/configure $(DIST_DIR)/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/tclconfig
+       $(DIST_INSTALL_DATA) $(srcdir)/tclconfig/README.txt \
+           $(srcdir)/tclconfig/tcl.m4 $(srcdir)/tclconfig/install-sh \
+           $(DIST_DIR)/tclconfig/
+
+       # Extension files
+       $(DIST_INSTALL_DATA) \
+           $(srcdir)/ChangeLog \
+           $(srcdir)/license.terms \
+           $(srcdir)/README \
+           $(srcdir)/pkgIndex.tcl.in \
+           $(DIST_DIR)/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/doc
+       $(DIST_INSTALL_DATA) $(srcdir)/doc/tdbc_mysql.n $(DIST_DIR)/doc/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/generic
+       $(DIST_INSTALL_DATA) \
+               $(srcdir)/generic/fakemysql.h \
+               $(srcdir)/generic/mysqlStubDefs.txt \
+               $(srcdir)/generic/mysqlStubInit.c \
+               $(srcdir)/generic/mysqlStubs.h \
+               $(srcdir)/generic/tdbcmysql.c \
+               $(srcdir)/generic/int2ptr_ptr2int.h \
+               $(DIST_DIR)/generic/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/library
+       $(DIST_INSTALL_DATA) $(srcdir)/library/tdbcmysql.tcl 
$(DIST_DIR)/library/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/tests
+       $(DIST_INSTALL_DATA) $(srcdir)/tests/all.tcl 
$(srcdir)/tests/tdbcmysql.test \
+               $(DIST_DIR)/tests/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/win
+       $(DIST_INSTALL_DATA) $(srcdir)/win/makefile.vc $(srcdir)/win/nmakehlp.c 
\
+               $(srcdir)/win/targets.vc $(srcdir)/win/rules-ext.vc \
+               $(srcdir)/win/rules.vc $(DIST_DIR)/win/
+
+       (cd $(DIST_ROOT); $(COMPRESS);)
+
+#========================================================================
+# How to rebuild the package's stub table.
+#========================================================================
+
+genstubs: $(TDBC_SRC_DIR)/tools/genExtStubs.tcl 
$(srcdir)/generic/mysqlStubDefs.txt
+       @echo $(TCLSH_PROGRAM) $(TDBC_SRC_DIR)/tools/genExtStubs.tcl \
+               $(srcdir)/generic/mysqlStubDefs.txt \
+               $(srcdir)/generic/mysqlStubs.h \
+               $(srcdir)/generic/mysqlStubInit.c
+       @$(TCLSH) $(TDBC_SRC_DIR)/tools/genExtStubs.tcl \
+               $(srcdir)/generic/mysqlStubDefs.txt \
+               $(srcdir)/generic/mysqlStubs.h \
+               $(srcdir)/generic/mysqlStubInit.c
+
+#========================================================================
+# End of user-definable section
+#========================================================================
+
+#========================================================================
+# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
+# variable in configure.ac
+#========================================================================
+
+clean:
+       -test -z "$(BINARIES)" || rm -f $(BINARIES)
+       -rm -f *.$(OBJEXT) core *.core
+       -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean: clean
+       -rm -f *.tab.c
+       -rm -f $(CONFIG_CLEAN_FILES)
+       -rm -f config.cache config.log config.status
+
+#========================================================================
+# Install binary object libraries.  On Windows this includes both .dll and
+# .lib files.  Because the .lib files are not explicitly listed anywhere,
+# we need to deduce their existence from the .dll file of the same name.
+# Library files go into the lib directory.
+# In addition, this will generate the pkgIndex.tcl
+# file in the install location (assuming it can find a usable tclsh shell)
+#
+# You should not have to modify this target.
+#========================================================================
+
+install-lib-binaries: binaries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(pkglibdir)
+       @list='$(lib_BINARIES)'; for p in $$list; do \
+         if test -f $$p; then \
+           echo " $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
+           $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p; \
+           ext=`echo $$p|sed -e "s/.*\.//"`; \
+           if test "x$$ext" = "xdll"; then \
+               lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
+               if test -f $$lib; then \
+                   echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; 
\
+                   $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
+               fi; \
+           fi; \
+         fi; \
+       done
+       @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+         if test -f $(srcdir)/$$p; then \
+           destp=`basename $$p`; \
+           echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
+           $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
+         fi; \
+       done
+       @if test "x$(SHARED_BUILD)" = "x1"; then \
+           echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
+           $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
+       fi
+
+#========================================================================
+# Install binary executables (e.g. .exe files and dependent .dll files)
+# This is for files that must go in the bin directory (located next to
+# wish and tclsh), like dependent .dll files on Windows.
+#
+# You should not have to modify this target, except to define bin_BINARIES
+# above if necessary.
+#========================================================================
+
+install-bin-binaries: binaries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(bindir)
+       @list='$(bin_BINARIES)'; for p in $$list; do \
+         if test -f $$p; then \
+           echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
+           $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
+         fi; \
+       done
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
+       cd $(top_builddir) \
+         && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+uninstall-binaries:
+       list='$(lib_BINARIES)'; for p in $$list; do \
+         rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+       done
+       list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+         p=`basename $$p`; \
+         rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+       done
+       list='$(bin_BINARIES)'; for p in $$list; do \
+         rm -f $(DESTDIR)$(bindir)/$$p; \
+       done
+
+.PHONY: all binaries clean depend distclean doc install libraries test
+.PHONY: gdb gdb-test valgrind valgrindshell
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:


Property changes on: 
brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcmysql1.1.1/Makefile.in
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcodbc1.1.1/Makefile.in
===================================================================
--- brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcodbc1.1.1/Makefile.in   
                        (rev 0)
+++ brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcodbc1.1.1/Makefile.in   
2020-10-23 15:47:03 UTC (rev 77613)
@@ -0,0 +1,502 @@
+# Makefile.in --
+#
+#      This file is a Makefile for Sample TEA Extension.  If it has the name
+#      "Makefile.in" then it is a template for a Makefile;  to generate the
+#      actual Makefile, run "./configure", which is a configuration script
+#      generated by the "autoconf" program (constructs like "@foo@" will get
+#      replaced in the actual Makefile.
+#
+# Copyright (c) 1999 Scriptics Corporation.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+
+#========================================================================
+# Add additional lines to handle any additional AC_SUBST cases that
+# have been added in a customized configure script.
+#========================================================================
+
+#SAMPLE_NEW_VAR        = @SAMPLE_NEW_VAR@
+
+#========================================================================
+# Nothing of the variables below this line should need to be changed.
+# Please check the TARGETS section below to make sure the make targets
+# are correct.
+#========================================================================
+
+#========================================================================
+# The names of the source files is defined in the configure script.
+# The object files are used for linking into the final library.
+# This will be used when a dist target is added to the Makefile.
+# It is not important to specify the directory, as long as it is the
+# $(srcdir) or in the generic, win or unix subdirectory.
+#========================================================================
+
+PKG_SOURCES    = @PKG_SOURCES@
+PKG_OBJECTS    = @PKG_OBJECTS@
+
+PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
+PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
+
+#========================================================================
+# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
+# this package that need to be installed, if any.
+#========================================================================
+
+PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
+
+#========================================================================
+# This is a list of public header files to be installed, if any.
+#========================================================================
+
+PKG_HEADERS    = @PKG_HEADERS@
+
+#========================================================================
+# "PKG_LIB_FILE" refers to the library (dynamic or static as per
+# configuration options) composed of the named objects.
+#========================================================================
+
+PKG_LIB_FILE   = @PKG_LIB_FILE@
+PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
+
+lib_BINARIES   = $(PKG_LIB_FILE)
+BINARIES       = $(lib_BINARIES)
+
+SHELL          = @SHELL@
+
+srcdir         = @srcdir@
+prefix         = @prefix@
+exec_prefix    = @exec_prefix@
+
+bindir         = @bindir@
+libdir         = @libdir@
+includedir     = @includedir@
+datarootdir    = @datarootdir@
+datadir                = @datadir@
+mandir         = @mandir@
+
+DESTDIR                =
+
+PKG_DIR                = $(PACKAGE_NAME)$(PACKAGE_VERSION)
+pkgdatadir     = $(datadir)/$(PKG_DIR)
+pkglibdir      = $(libdir)/$(PKG_DIR)
+pkgincludedir  = $(includedir)/$(PKG_DIR)
+
+top_builddir   = @abs_top_builddir@
+
+INSTALL_OPTIONS        =
+INSTALL                = @INSTALL@ $(INSTALL_OPTIONS)
+INSTALL_DATA_DIR = @INSTALL_DATA_DIR@
+INSTALL_DATA   = @INSTALL_DATA@
+INSTALL_PROGRAM        = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_LIBRARY        = @INSTALL_LIBRARY@
+
+PACKAGE_NAME   = @PACKAGE_NAME@
+PACKAGE_VERSION        = @PACKAGE_VERSION@
+CC             = @CC@
+CFLAGS_DEFAULT = @CFLAGS_DEFAULT@
+CFLAGS_WARNING = @CFLAGS_WARNING@
+EXEEXT         = @EXEEXT@
+LDFLAGS_DEFAULT        = @LDFLAGS_DEFAULT@
+MAKE_LIB       = @MAKE_LIB@
+MAKE_SHARED_LIB        = @MAKE_SHARED_LIB@
+MAKE_STATIC_LIB        = @MAKE_STATIC_LIB@
+MAKE_STUB_LIB  = @MAKE_STUB_LIB@
+OBJEXT         = @OBJEXT@
+RANLIB         = @RANLIB@
+RANLIB_STUB    = @RANLIB_STUB@
+SHLIB_CFLAGS   = @SHLIB_CFLAGS@
+SHLIB_LD       = @SHLIB_LD@
+SHLIB_LD_LIBS  = @SHLIB_LD_LIBS@
+STLIB_LD       = @STLIB_LD@
+#TCL_DEFS      = @TCL_DEFS@
+TCL_BIN_DIR    = @TCL_BIN_DIR@
+TCL_SRC_DIR    = @TCL_SRC_DIR@
+#TK_BIN_DIR    = @TK_BIN_DIR@
+#TK_SRC_DIR    = @TK_SRC_DIR@
+
+TDBC_VERSION   = @TDBC_VERSION@
+TDBC_SRC_DIR   = @tdbc_SRC_DIR@
+TDBC_BIN_DIR   = @tdbc_BIN_DIR@
+TDBC_LIB_FILE  = @TDBC_LIB_FILE@
+
+# Not used, but retained for reference of what libs Tcl required
+#TCL_LIBS      = @TCL_LIBS@
+
+#========================================================================
+# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
+# package without installing.  The other environment variables allow us
+# to test against an uninstalled Tcl.  Add special env vars that you
+# require for testing here (like TCLX_LIBRARY).
+#========================================================================
+
+EXTRA_PATH     = $(top_builddir):$(TCL_BIN_DIR)
+#EXTRA_PATH    = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
+TCLLIBPATH     = $(top_builddir) $(TDBC_BIN_DIR)
+TCLSH_ENV      = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library`
+PKG_ENV                = 
@LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
+                 PATH="$(EXTRA_PATH):$(PATH)" \
+                 TDBCODBC_LIBRARY=`@CYGPATH@ $(srcdir)/library` \
+                 TDBC_LIBRARY=`@CYGPATH@ @tdbc_LIBRARY_PATH@` \
+                 TCLLIBPATH="$(TCLLIBPATH)"
+
+TCLSH_PROG     = @TCLSH_PROG@
+TCLSH          = $(TCLSH_ENV) $(PKG_ENV) $(TCLSH_PROG)
+
+#WISH_ENV      = TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
+#WISH_PROG     = @WISH_PROG@
+#WISH          = $(TCLSH_ENV) $(WISH_ENV) $(PKG_ENV) $(WISH_PROG)
+
+SHARED_BUILD   = @SHARED_BUILD@
+
+INCLUDES       = @PKG_INCLUDES@ @TCL_INCLUDES@
+#INCLUDES      = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
+
+PKG_CFLAGS     = @PKG_CFLAGS@
+
+# TCL_DEFS is not strictly need here, but if you remove it, then you
+# must make sure that configure.ac checks for the necessary components
+# that your library may use.  TCL_DEFS can actually be a problem if
+# you do not compile with a similar machine setup as the Tcl core was
+# compiled with.
+#DEFS          = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
+DEFS           = @DEFS@ $(PKG_CFLAGS)
+
+# Move pkgIndex.tcl to 'BINARIES' var if it is generated in the Makefile
+CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl tdbcConfig.sh
+CLEANFILES     = @CLEANFILES@
+
+CPPFLAGS       = @CPPFLAGS@
+LIBS           = @PKG_LIBS@ @LIBS@
+AR             = @AR@
+CFLAGS         = @CFLAGS@
+COMPILE                = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) 
$(AM_CFLAGS) $(CFLAGS)
+
+GDB            = gdb
+VALGRIND       = valgrind
+VALGRINDARGS   = --tool=memcheck --num-callers=16 --leak-resolution=high \
+                 --leak-check=yes --show-reachable=yes -v
+
+.SUFFIXES: .c .$(OBJEXT)
+
+#========================================================================
+# Start of user-definable TARGETS section
+#========================================================================
+
+#========================================================================
+# TEA TARGETS.  Please note that the "libraries:" target refers to platform
+# independent files, and the "binaries:" target includes executable programs 
and
+# platform-dependent libraries.  Modify these targets so that they install
+# the various pieces of your package.  The make and install rules
+# for the BINARIES that you specified above have already been done.
+#========================================================================
+
+all: binaries libraries doc
+
+#========================================================================
+# The binaries target builds executable programs, Windows .dll's, unix
+# shared/static libraries, and any other platform-dependent files.
+# The list of targets to build for "binaries:" is specified at the top
+# of the Makefile, in the "BINARIES" variable.
+#========================================================================
+
+binaries: $(BINARIES)
+
+libraries:
+
+#========================================================================
+# Your doc target should differentiate from doc builds (by the developer)
+# and doc installs (see install-doc), which just install the docs on the
+# end user machine when building from source.
+#========================================================================
+
+doc:
+
+install: all install-binaries install-libraries install-doc
+
+install-binaries: binaries install-lib-binaries install-bin-binaries
+
+#========================================================================
+# This rule installs platform-independent files, such as header files.
+# The list=...; for p in $$list handles the empty list case x-platform.
+#========================================================================
+
+install-libraries: libraries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(includedir)
+       @echo "Installing header files in $(DESTDIR)$(includedir)"
+       @list='$(PKG_HEADERS)'; for i in $$list; do \
+           echo "Installing $(srcdir)/$$i" ; \
+           $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
+       done;
+
+#========================================================================
+# Install documentation.  Unix manpages should go in the $(mandir)
+# directory.
+#========================================================================
+
+install-doc: doc
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(mandir)/mann
+       @echo "Installing documentation in $(DESTDIR)$(mandir)"
+       @list='$(srcdir)/doc/*.n'; for i in $$list; do \
+           echo "Installing $$i"; \
+           $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
+       done
+
+test: test-jet test-sqlserver test-sqlite
+
+test-jet: binaries libraries
+       @echo testing tdbcodbc against Jet
+       TDBCODBC_TEST_TYPE=jet \
+               $(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) \
+               -load "package ifneeded tdbc::odbc $(PACKAGE_VERSION) \
+                       [list source `@CYGPATH@ 
$(srcdir)/library/tdbcodbc.tcl`]\;[list load `@CYGPATH@ $(PKG_LIB_FILE)` 
$(PACKAGE_NAME)]"
+
+test-sqlserver: binaries libraries
+       @echo testing tdbcodbc against SQL Server
+       TDBCODBC_TEST_TYPE=sqlserver \
+               $(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) \
+               -load "package ifneeded tdbc::odbc ${PACKAGE_VERSION} \
+                       [list source `@CYGPATH@ 
$(srcdir)/library/tdbcodbc.tcl`]\;[list load `@CYGPATH@ $(PKG_LIB_FILE)` 
$(PACKAGE_NAME)]"
+
+test-sqlite: binaries libraries
+       @echo testing tdbcodbc against SQLite
+       TDBCODBC_TEST_TYPE=sqlite \
+               $(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) \
+               -load "package ifneeded tdbc::odbc ${PACKAGE_VERSION} \
+                       [list source `@CYGPATH@ 
$(srcdir)/library/tdbcodbc.tcl`]\;[list load `@CYGPATH@ $(PKG_LIB_FILE)` 
$(PACKAGE_NAME)]"
+
+valgrind-sqlite: binaries libraries
+       TDBCODBC_TEST_TYPE=sqlite \
+       $(PKG_ENV) $(TCLSH_ENV) \
+       LD_PRELOAD=$(PKG_LIB_FILE) \
+       $(VALGRIND) $(VALGRINDARGS) \
+       $(TCLSH_PROG) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) \
+               -load "package ifneeded tdbc::odbc ${PACKAGE_VERSION} \
+                       [list source `@CYGPATH@ 
$(srcdir)/library/tdbcodbc.tcl`]\;[list load `@CYGPATH@ $(PKG_LIB_FILE)` 
$(PACKAGE_NAME)]"
+
+shell: binaries libraries
+       @$(TCLSH) $(SCRIPT)
+
+gdb:
+       $(TCLSH_ENV) $(PKG_ENV) $(GDB) $(TCLSH_PROG) $(SCRIPT)
+
+depend:
+
+#========================================================================
+# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
+# mentioned above.  That will ensure that this target is built when you
+# run "make binaries".
+#
+# The $(PKG_OBJECTS) objects are created and linked into the final
+# library.  In most cases these object files will correspond to the
+# source files above.
+#========================================================================
+
+$(PKG_LIB_FILE): $(PKG_OBJECTS)
+       -rm -f $(PKG_LIB_FILE)
+       ${MAKE_LIB}
+       $(RANLIB) $(PKG_LIB_FILE)
+
+$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
+       -rm -f $(PKG_STUB_LIB_FILE)
+       ${MAKE_STUB_LIB}
+       $(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
+
+#========================================================================
+# We need to enumerate the list of .c to .o lines here.
+#
+# In the following lines, $(srcdir) refers to the toplevel directory
+# containing your extension.  If your sources are in a subdirectory,
+# you will have to modify the paths to reflect this:
+#
+# sample.$(OBJEXT): $(srcdir)/generic/sample.c
+#      $(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
+#
+# Setting the VPATH variable to a list of paths will cause the makefile
+# to look into these paths when resolving .c to .obj dependencies.
+# As necessary, add $(srcdir):$(srcdir)/compat:....
+#========================================================================
+
+VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win
+
+.c.@OBJEXT@:
+       $(COMPILE) -c `@CYGPATH@ $<` -o $@
+
+#========================================================================
+# Distribution creation
+# You may need to tweak this target to make it work correctly.
+#========================================================================
+
+#COMPRESS      = tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
+COMPRESS       = tar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
+DIST_ROOT      = /tmp/dist
+DIST_DIR       = $(DIST_ROOT)/$(PKG_DIR)
+
+DIST_INSTALL_DATA      = CPPROG='cp -p' $(INSTALL) -m 644
+DIST_INSTALL_SCRIPT    = CPPROG='cp -p' $(INSTALL) -m 755
+
+dist-clean:
+       rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
+
+dist: dist-clean
+       $(INSTALL_DATA_DIR) $(DIST_DIR)
+
+       # TEA files
+       $(DIST_INSTALL_DATA) $(srcdir)/Makefile.in \
+           $(srcdir)/aclocal.m4 $(srcdir)/configure.ac \
+           $(DIST_DIR)/
+       $(DIST_INSTALL_SCRIPT) $(srcdir)/configure $(DIST_DIR)/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/tclconfig
+       $(DIST_INSTALL_DATA) $(srcdir)/tclconfig/README.txt \
+           $(srcdir)/tclconfig/tcl.m4 $(srcdir)/tclconfig/install-sh \
+           $(DIST_DIR)/tclconfig/
+
+       # Extension files
+       $(DIST_INSTALL_DATA) \
+           $(srcdir)/ChangeLog \
+           $(srcdir)/license.terms \
+           $(srcdir)/README \
+           $(srcdir)/pkgIndex.tcl.in \
+           $(DIST_DIR)/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/doc
+       $(DIST_INSTALL_DATA) $(srcdir)/doc/tdbc_odbc.n $(DIST_DIR)/doc/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/generic
+       $(DIST_INSTALL_DATA) \
+               $(srcdir)/generic/fakesql.h $(srcdir)/generic/odbcStubDefs.txt \
+               $(srcdir)/generic/odbcStubInit.c $(srcdir)/generic/odbcStubs.h \
+               $(srcdir)/generic/tdbcodbc.c \
+               $(srcdir)/generic/int2ptr_ptr2int.h \
+               $(DIST_DIR)/generic/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/library
+       $(DIST_INSTALL_DATA) $(srcdir)/library/tdbcodbc.tcl $(DIST_DIR)/library/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/tests
+       $(DIST_INSTALL_DATA) $(srcdir)/tests/all.tcl 
$(srcdir)/tests/tdbcodbc.test \
+               $(srcdir)/tests/test.mdb \
+               $(DIST_DIR)/tests/
+
+       $(INSTALL_DATA_DIR) $(DIST_DIR)/win
+       $(DIST_INSTALL_DATA) $(srcdir)/win/makefile.vc $(srcdir)/win/nmakehlp.c 
\
+               $(srcdir)/win/targets.vc $(srcdir)/win/rules-ext.vc \
+               $(srcdir)/win/rules.vc $(DIST_DIR)/win/
+
+       (cd $(DIST_ROOT); $(COMPRESS);)
+
+#========================================================================
+# How to rebuild the package's stub table.
+#========================================================================
+
+genstubs: $(TDBC_SRC_DIR)/tools/genExtStubs.tcl 
$(srcdir)/generic/odbcStubDefs.txt
+       @echo $(TCLSH_PROGRAM) $(TDBC_SRC_DIR)/tools/genExtStubs.tcl \
+               $(srcdir)/generic/odbcStubDefs.txt \
+               $(srcdir)/generic/odbcStubs.h \
+               $(srcdir)/generic/odbcStubInit.c
+       @$(TCLSH) $(TDBC_SRC_DIR)/tools/genExtStubs.tcl \
+               $(srcdir)/generic/odbcStubDefs.txt \
+               $(srcdir)/generic/odbcStubs.h \
+               $(srcdir)/generic/odbcStubInit.c
+
+#========================================================================
+# End of user-definable section
+#========================================================================
+
+#========================================================================
+# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
+# variable in configure.ac
+#========================================================================
+
+clean:
+       -test -z "$(BINARIES)" || rm -f $(BINARIES)
+       -rm -f *.$(OBJEXT) core *.core
+       -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean: clean
+       -rm -f *.tab.c
+       -rm -f $(CONFIG_CLEAN_FILES)
+       -rm -f config.cache config.log config.status
+
+#========================================================================
+# Install binary object libraries.  On Windows this includes both .dll and
+# .lib files.  Because the .lib files are not explicitly listed anywhere,
+# we need to deduce their existence from the .dll file of the same name.
+# Library files go into the lib directory.
+# In addition, this will generate the pkgIndex.tcl
+# file in the install location (assuming it can find a usable tclsh shell)
+#
+# You should not have to modify this target.
+#========================================================================
+
+install-lib-binaries: binaries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(pkglibdir)
+       @list='$(lib_BINARIES)'; for p in $$list; do \
+         if test -f $$p; then \
+           echo " $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
+           $(INSTALL_LIBRARY) $$p $(DESTDIR)$(pkglibdir)/$$p; \
+           ext=`echo $$p|sed -e "s/.*\.//"`; \
+           if test "x$$ext" = "xdll"; then \
+               lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
+               if test -f $$lib; then \
+                   echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; 
\
+                   $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
+               fi; \
+           fi; \
+         fi; \
+       done
+       @list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+         if test -f $(srcdir)/$$p; then \
+           destp=`basename $$p`; \
+           echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
+           $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
+         fi; \
+       done
+       @if test "x$(SHARED_BUILD)" = "x1"; then \
+           echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
+           $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
+       fi
+
+#========================================================================
+# Install binary executables (e.g. .exe files and dependent .dll files)
+# This is for files that must go in the bin directory (located next to
+# wish and tclsh), like dependent .dll files on Windows.
+#
+# You should not have to modify this target, except to define bin_BINARIES
+# above if necessary.
+#========================================================================
+
+install-bin-binaries: binaries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(bindir)
+       @list='$(bin_BINARIES)'; for p in $$list; do \
+         if test -f $$p; then \
+           echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
+           $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
+         fi; \
+       done
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
+       cd $(top_builddir) \
+         && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+uninstall-binaries:
+       list='$(lib_BINARIES)'; for p in $$list; do \
+         rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+       done
+       list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+         p=`basename $$p`; \
+         rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+       done
+       list='$(bin_BINARIES)'; for p in $$list; do \
+         rm -f $(DESTDIR)$(bindir)/$$p; \
+       done
+
+.PHONY: all binaries clean depend distclean doc install libraries test
+.PHONY: gdb
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:


Property changes on: 
brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcodbc1.1.1/Makefile.in
___________________________________________________________________
Added: svn:eol-style
## -0,0 +1 ##
+native
\ No newline at end of property
Added: svn:mime-type
## -0,0 +1 ##
+text/plain
\ No newline at end of property
Added: 
brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcpostgres1.1.1/Makefile.in
===================================================================
--- 
brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcpostgres1.1.1/Makefile.in   
                            (rev 0)
+++ 
brlcad/branches/extbuild/src/other/ext/tcl/pkgs/tdbcpostgres1.1.1/Makefile.in   
    2020-10-23 15:47:03 UTC (rev 77613)
@@ -0,0 +1,492 @@
+# Makefile.in --
+#
+#      This file is a Makefile for Sample TEA Extension.  If it has the name
+#      "Makefile.in" then it is a template for a Makefile;  to generate the
+#      actual Makefile, run "./configure", which is a configuration script
+#      generated by the "autoconf" program (constructs like "@foo@" will get
+#      replaced in the actual Makefile.
+#
+# Copyright (c) 1999 Scriptics Corporation.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+
+#========================================================================
+# Add additional lines to handle any additional AC_SUBST cases that
+# have been added in a customized configure script.
+#========================================================================
+
+#SAMPLE_NEW_VAR        = @SAMPLE_NEW_VAR@
+
+#========================================================================
+# Nothing of the variables below this line should need to be changed.
+# Please check the TARGETS section below to make sure the make targets
+# are correct.
+#========================================================================
+
+#========================================================================
+# The names of the source files is defined in the configure script.
+# The object files are used for linking into the final library.
+# This will be used when a dist target is added to the Makefile.
+# It is not important to specify the directory, as long as it is the
+# $(srcdir) or in the generic, win or unix subdirectory.
+#========================================================================
+
+PKG_SOURCES    = @PKG_SOURCES@
+PKG_OBJECTS    = @PKG_OBJECTS@
+
+PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
+PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
+
+#========================================================================
+# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
+# this package that need to be installed, if any.
+#========================================================================
+
+PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
+
+#========================================================================
+# This is a list of public header files to be installed, if any.
+#========================================================================
+
+PKG_HEADERS    = @PKG_HEADERS@
+
+#========================================================================
+# "PKG_LIB_FILE" refers to the library (dynamic or static as per
+# configuration options) composed of the named objects.
+#========================================================================
+
+PKG_LIB_FILE   = @PKG_LIB_FILE@
+PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
+
+lib_BINARIES   = $(PKG_LIB_FILE)
+BINARIES       = $(lib_BINARIES)
+
+SHELL          = @SHELL@
+
+srcdir         = @srcdir@
+prefix         = @prefix@
+exec_prefix    = @exec_prefix@
+
+bindir         = @bindir@
+libdir         = @libdir@
+includedir     = @includedir@
+datarootdir    = @datarootdir@
+datadir                = @datadir@
+mandir         = @mandir@
+
+DESTDIR                =
+
+PKG_DIR                = $(PACKAGE_NAME)$(PACKAGE_VERSION)
+pkgdatadir     = $(datadir)/$(PKG_DIR)
+pkglibdir      = $(libdir)/$(PKG_DIR)
+pkgincludedir  = $(includedir)/$(PKG_DIR)
+
+top_builddir   = @abs_top_builddir@
+
+INSTALL_OPTIONS        =
+INSTALL                = @INSTALL@ $(INSTALL_OPTIONS)
+INSTALL_DATA_DIR = @INSTALL_DATA_DIR@
+INSTALL_DATA   = @INSTALL_DATA@
+INSTALL_PROGRAM        = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_LIBRARY        = @INSTALL_LIBRARY@
+
+PACKAGE_NAME   = @PACKAGE_NAME@
+PACKAGE_VERSION        = @PACKAGE_VERSION@
+CC             = @CC@
+CFLAGS_DEFAULT = @CFLAGS_DEFAULT@
+CFLAGS_WARNING = @CFLAGS_WARNING@
+EXEEXT         = @EXEEXT@
+LDFLAGS_DEFAULT        = @LDFLAGS_DEFAULT@
+MAKE_LIB       = @MAKE_LIB@
+MAKE_SHARED_LIB        = @MAKE_SHARED_LIB@
+MAKE_STATIC_LIB        = @MAKE_STATIC_LIB@
+MAKE_STUB_LIB  = @MAKE_STUB_LIB@
+OBJEXT         = @OBJEXT@
+RANLIB         = @RANLIB@
+RANLIB_STUB    = @RANLIB_STUB@
+SHLIB_CFLAGS   = @SHLIB_CFLAGS@
+SHLIB_LD       = @SHLIB_LD@
+SHLIB_LD_LIBS  = @SHLIB_LD_LIBS@
+STLIB_LD       = @STLIB_LD@
+#TCL_DEFS      = @TCL_DEFS@
+TCL_BIN_DIR    = @TCL_BIN_DIR@
+TCL_SRC_DIR    = @TCL_SRC_DIR@
+#TK_BIN_DIR    = @TK_BIN_DIR@
+#TK_SRC_DIR    = @TK_SRC_DIR@
+
+TDBC_VERSION   = @TDBC_VERSION@
+TDBC_SRC_DIR   = @tdbc_SRC_DIR@
+TDBC_BIN_DIR   = @tdbc_BIN_DIR@
+TDBC_LIB_FILE  = @TDBC_LIB_FILE@
+
+# Not used, but retained for reference of what libs Tcl required
+#TCL_LIBS      = @TCL_LIBS@
+
+#========================================================================
+# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
+# package without installing.  The other environment variables allow us
+# to test against an uninstalled Tcl.  Add special env vars that you
+# require for testing here (like TCLX_LIBRARY).
+#========================================================================
+
+EXTRA_PATH     = $(top_builddir):$(TCL_BIN_DIR)
+#EXTRA_PATH    = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
+TCLLIBPATH     = $(top_builddir) $(TDBC_BIN_DIR)
+TCLSH_ENV      = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library`
+PKG_ENV                = 
@LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
+                 PATH="$(EXTRA_PATH):$(PATH)" \
+                 TDBC_LIBRARY=`@CYGPATH@ @tdbc_LIBRARY_PATH@` \
+                 TDBCPOSTGRES_LIBRARY=`@CYGPATH@ $(srcdir)/library` \
+                 TCLLIBPATH="$(TCLLIBPATH)"
+
+TCLSH_PROG     = @TCLSH_PROG@
+TCLSH          = $(TCLSH_ENV) $(PKG_ENV) $(TCLSH_PROG)
+
+#WISH_ENV      = TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
+#WISH_PROG     = @WISH_PROG@
+#WISH          = $(TCLSH_ENV) $(WISH_ENV) $(PKG_ENV) $(WISH_PROG)
+
+SHARED_BUILD   = @SHARED_BUILD@
+
+INCLUDES       = @PKG_INCLUDES@ @TCL_INCLUDES@
+#INCLUDES      = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
+
+PKG_CFLAGS     = @PKG_CFLAGS@
+
+# TCL_DEFS is not strictly need here, but if you remove it, then you
+# must make sure that configure.ac checks for the necessary components
+# that your library may use.  TCL_DEFS can actually be a problem if
+# you do not compile with a similar machine setup as the Tcl core was
+# compiled with.
+#DEFS          = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
+DEFS           = @DEFS@ $(PKG_CFLAGS)
+
+# Move pkgIndex.tcl to 'BINARIES' var if it is generated in the Makefile
+CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl
+CLEANFILES     = @CLEANFILES@
+
+CPPFLAGS       = @CPPFLAGS@
+LIBS           = @PKG_LIBS@ @LIBS@
+AR             = @AR@
+CFLAGS         = @CFLAGS@
+COMPILE                = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) 
$(AM_CFLAGS) $(CFLAGS)
+
+GDB            = gdb
+VALGRIND       = valgrind
+VALGRINDARGS   = --tool=memcheck --num-callers=16 --leak-resolution=high \
+                 --leak-check=yes --show-reachable=yes -v
+
+.SUFFIXES: .c .$(OBJEXT)
+
+#========================================================================
+# Start of user-definable TARGETS section
+#========================================================================
+
+#========================================================================
+# TEA TARGETS.  Please note that the "libraries:" target refers to platform
+# independent files, and the "binaries:" target includes executable programs 
and
+# platform-dependent libraries.  Modify these targets so that they install
+# the various pieces of your package.  The make and install rules
+# for the BINARIES that you specified above have already been done.
+#========================================================================
+
+all: binaries libraries doc
+
+#========================================================================
+# The binaries target builds executable programs, Windows .dll's, unix
+# shared/static libraries, and any other platform-dependent files.
+# The list of targets to build for "binaries:" is specified at the top
+# of the Makefile, in the "BINARIES" variable.
+#========================================================================
+
+binaries: $(BINARIES)
+
+libraries:
+
+#========================================================================
+# Your doc target should differentiate from doc builds (by the developer)
+# and doc installs (see install-doc), which just install the docs on the
+# end user machine when building from source.
+#========================================================================
+
+doc:
+
+install: all install-binaries install-libraries install-doc
+
+install-binaries: binaries install-lib-binaries install-bin-binaries
+
+#========================================================================
+# This rule installs platform-independent files, such as header files.
+# The list=...; for p in $$list handles the empty list case x-platform.
+#========================================================================
+
+install-libraries: libraries
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(includedir)
+       @echo "Installing header files in $(DESTDIR)$(includedir)"
+       @list='$(PKG_HEADERS)'; for i in $$list; do \
+           echo "Installing $(srcdir)/$$i" ; \
+           $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
+       done;
+
+#========================================================================
+# Install documentation.  Unix manpages should go in the $(mandir)
+# directory.
+#========================================================================
+
+install-doc: doc
+       @$(INSTALL_DATA_DIR) $(DESTDIR)$(mandir)/mann
+       @echo "Installing documentation in $(DESTDIR)$(mandir)"
+       @list='$(srcdir)/doc/*.n'; for i in $$list; do \
+           echo "Installing $$i"; \
+           $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
+       done
+
+test: binaries libraries
+       $(TCLSH) `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS) \
+               -load "package ifneeded tdbc::postgres $(PACKAGE_VERSION) \
+                       [list source `@CYGPATH@ 
$(srcdir)/library/tdbcpostgres.tcl`]\;[list load `@CYGPATH@ $(PKG_LIB_FILE)` 
$(PACKAGE_NAME)]"
+
+shell: binaries libraries
+       @$(TCLSH) $(SCRIPT)
+
+gdb:
+       $(TCLSH_ENV) $(PKG_ENV) $(GDB) $(TCLSH_PROG) $(SCRIPT)
+
+gdb-test: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(GDB) \
+           --args $(TCLSH_PROG) `@CYGPATH@ $(srcdir)/tests/all.tcl` \
+           $(TESTFLAGS) -singleproc 1 \
+           -load "package ifneeded $(PACKAGE_NAME) $(PACKAGE_VERSION) \
+               [list load `@CYGPATH@ $(PKG_LIB_FILE)` $(PACKAGE_NAME)]"
+
+valgrind: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(VALGRIND) $(VALGRINDARGS) $(TCLSH_PROG) \
+           `@CYGPATH@ $(srcdir)/tests/all.tcl` $(TESTFLAGS)
+
+valgrindshell: binaries libraries
+       $(TCLSH_ENV) $(PKG_ENV) $(VALGRIND) $(VALGRINDARGS) $(TCLSH_PROG) 
$(SCRIPT)
+
+depend:
+
+#========================================================================
+# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
+# mentioned above.  That will ensure that this target is built when you

@@ Diff output truncated at 100000 characters. @@
This was sent by the SourceForge.net collaborative development platform, the 
world's largest Open Source development site.



_______________________________________________
BRL-CAD Source Commits mailing list
brlcad-commits@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/brlcad-commits