Tom,
Can you run glxgears on that system? That looks like an OpenGL failure.
If you want to work around it, you can disable OpenGL by setting
BRLCAD_ENABLE_OPENGL to OFF...
Cliff
On Fri, Mar 2, 2012 at 8:34 PM, Tom Browder <[email protected]> wrote:
> Note no dump when doing:
>
> $ mged -c
>
> mged debug stack trace:
>
>
> #0 0x00007f3977f6f4fd in Tk_CreateWindow (interp=0x24110d0,
> parent=0x0, name=0x2b00ef9 "ul", screenName=0x0)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tk/generic/tkWindow.c:1037
> #1 0x00007f398a4bd654 in ogl_open (interp=0x24110d0, argc=6,
> argv=0x24162d8) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/libdm/dm-ogl.c:847
> #2 0x00007f398a4cb3a0 in dm_open (interp=0x24110d0, type=4, argc=7,
> argv=0x24162d0) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/libdm/dm-generic.c:105
> #3 0x00000000004515c7 in Ogl_dm_init (o_dm_list=0x23f75d0, argc=8,
> argv=0x24162d0) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/mged/dm-ogl.c:124
> #4 0x0000000000429d60 in mged_attach (wp=0x6f81a8, argc=8,
> argv=0x24162d0) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/mged/attach.c:519
> #5 0x0000000000429741 in f_attach (UNUSED_clientData=0x6ffa38,
> interpreter=0x24110d0, argc=8, argv=0x24162d0)
> at /usr/src/tbrowde/brlcad-svn-trunk/src/mged/attach.c:378
> #6 0x00007f3976f764ff in TclInvokeStringCommand
> (clientData=0x273c6a0, interp=0x24110d0, objc=0, objv=0x2416288)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:2145
> #7 0x00007f3976f774e1 in TclEvalObjvInternal (interp=0x24110d0,
> objc=<value optimized out>, objv=<value optimized out>,
> command=0xffffffffffffffff <Address 0xffffffffffffffff out of
> bounds>, length=-1, flags=<value optimized out>)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:3689
> #8 0x00007f3976fbee84 in TclExecuteByteCode (interp=0x24110d0,
> codePtr=<value optimized out>)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclExecute.c:2419
> #9 0x00007f39770023bf in TclObjInterpProcCore (interp=<value
> optimized out>, procNameObj=<value optimized out>, skip=<value
> optimized out>,
> errorProc=<value optimized out>) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclProc.c:1760
> #10 0x00007f3976f774e1 in TclEvalObjvInternal (interp=0x24110d0,
> objc=<value optimized out>, objv=<value optimized out>, command=0x0,
> length=0,
> flags=<value optimized out>) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:3689
> #11 0x00007f3976f785c3 in Tcl_EvalObjv (interp=0x24110d0, objc=0,
> objv=0x2b00ef9, flags=0)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:3885
> #12 0x00007f3976f78a21 in TclEvalObjEx (interp=0x24110d0,
> objPtr=0x2b832f0, flags=0, invoker=<value optimized out>, word=<value
> optimized out>)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:5115
> #13 0x00007f3977002d9f in Tcl_UplevelObjCmd (dummy=<value optimized
> out>, interp=0x24110d0, objc=<value optimized out>, objv=0x24160c0)
> at /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclProc.c:948
> #14 0x00007f3976f774e1 in TclEvalObjvInternal (interp=0x24110d0,
> objc=<value optimized out>, objv=<value optimized out>,
> command=0xffffffffffffffff <Address 0xffffffffffffffff out of
> bounds>, length=-1, flags=<value optimized out>)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:3689
> #15 0x00007f3976fbee84 in TclExecuteByteCode (interp=0x24110d0,
> codePtr=<value optimized out>)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclExecute.c:2419
> #16 0x00007f39770023bf in TclObjInterpProcCore (interp=<value
> optimized out>, procNameObj=<value optimized out>, skip=<value
> optimized out>,
> errorProc=<value optimized out>) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclProc.c:1760
> #17 0x00007f3976f774e1 in TclEvalObjvInternal (interp=0x24110d0,
> objc=<value optimized out>, objv=<value optimized out>,
> command=0xffffffffffffffff <Address 0xffffffffffffffff out of
> bounds>, length=-1, flags=<value optimized out>)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:3689
> #18 0x00007f3976f773cd in TclEvalObjvInternal (interp=0x24110d0,
> objc=<value optimized out>, objv=<value optimized out>,
> command=0xffffffffffffffff <Address 0xffffffffffffffff out of
> bounds>, length=-1, flags=<value optimized out>)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:3829
> #19 0x00007f3976fbee84 in TclExecuteByteCode (interp=0x24110d0,
> codePtr=<value optimized out>)
> ---Type <return> to continue, or q <return> to quit---
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclExecute.c:2419
> #20 0x00007f39770023bf in TclObjInterpProcCore (interp=<value
> optimized out>, procNameObj=<value optimized out>, skip=<value
> optimized out>,
> errorProc=<value optimized out>) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclProc.c:1760
> #21 0x00007f3976f774e1 in TclEvalObjvInternal (interp=0x24110d0,
> objc=<value optimized out>, objv=<value optimized out>, command=0x0,
> length=0,
> flags=<value optimized out>) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:3689
> #22 0x00007f3976f785c3 in Tcl_EvalObjv (interp=0x24110d0, objc=0,
> objv=0x2b00ef9, flags=0)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:3885
> #23 0x00007f3976f78a21 in TclEvalObjEx (interp=0x24110d0,
> objPtr=0x2a40ab0, flags=0, invoker=<value optimized out>, word=<value
> optimized out>)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:5115
> #24 0x00007f3977002d9f in Tcl_UplevelObjCmd (dummy=<value optimized
> out>, interp=0x24110d0, objc=<value optimized out>, objv=0x24158d0)
> at /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclProc.c:948
> #25 0x00007f3976f774e1 in TclEvalObjvInternal (interp=0x24110d0,
> objc=<value optimized out>, objv=<value optimized out>,
> command=0xffffffffffffffff <Address 0xffffffffffffffff out of
> bounds>, length=-1, flags=<value optimized out>)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:3689
> #26 0x00007f3976fbee84 in TclExecuteByteCode (interp=0x24110d0,
> codePtr=<value optimized out>)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclExecute.c:2419
> #27 0x00007f39770023bf in TclObjInterpProcCore (interp=<value
> optimized out>, procNameObj=<value optimized out>, skip=<value
> optimized out>,
> errorProc=<value optimized out>) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclProc.c:1760
> #28 0x00007f3976f774e1 in TclEvalObjvInternal (interp=0x24110d0,
> objc=<value optimized out>, objv=<value optimized out>,
> command=0x286d8f0 "gui", length=3,
> flags=<value optimized out>) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:3689
> #29 0x00007f3976f773cd in TclEvalObjvInternal (interp=0x24110d0,
> objc=<value optimized out>, objv=<value optimized out>,
> command=0x286d8f0 "gui", length=3,
> flags=<value optimized out>) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:3829
> #30 0x00007f3976f78052 in TclEvalEx (interp=0x24110d0, script=<value
> optimized out>, numBytes=<value optimized out>, flags=<value optimized
> out>, line=1,
> clNextOuter=0x2415448, outerScript=0x286d8f0 "gui") at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:4386
> #31 0x00007f3976f78396 in Tcl_EvalEx (interp=0x24110d0, script=0x0,
> numBytes=45092601, flags=0)
> at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:4043
> #32 0x00007f3976f783bd in Tcl_Eval (interp=0x24110d0, script=0x0) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/other/tcl/generic/tclBasic.c:4955
> #33 0x00000000004b0a86 in main (argc=1, argv=0x7fffcbcb79d0) at
> /usr/src/tbrowde/brlcad-svn-trunk/src/mged/mged.c:1502
> (gdb)
>
> -Tom
>
>
> ------------------------------------------------------------------------------
> Virtualization & Cloud Management Using Capacity Planning
> Cloud computing makes use of virtualization - but cloud computing
> also focuses on allowing computing to be delivered as a service.
> http://www.accelacomm.com/jaw/sfnl/114/51521223/
> _______________________________________________
> BRL-CAD Developer mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>
------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
BRL-CAD Developer mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/brlcad-devel
