Hello,
Sorry for the late reply. As I said I got busy with my exams.
> You should see a consistent difference in performance, but this would
> require compiling and installing both with and without OpenCL support to
> make sure the same compilation options are being used.
>
I don't exactly understand by what you meant by compiling in OpenCL. Right
now, I am just following the raytrace tutorial. The command are as follows
(n order):
i
>
>
>
>
>
> *n sph.s sph 4 4 4 3in rcc.s rcc 4 4 0 0 0 4 3draw sph.s rcc.sr shapes.r u
> sph.s u rcc.smater shapes.r plastic 0 255 0 0B shapes.rrt*
>
This gives the raytrace output in the frame buffer
But in the output log there is nothing like "PREP" as you said.
Also for openCL raytracing, I am simply using "rt -z1" in place of the "rt"
command. But still the output log is exact same with no signs of OpenCL
compilation.
Please tell me how and what exactly to do for OpenCL compilation.
Regards
Shailesh
Shailesh Tripathi
B.Tech. Part-IV
Electronics Engineering
IIT-BHU (Varanasi)
On Tue, Mar 28, 2017 at 9:24 PM, Vasco Alexandre da Silva Costa <
vasco.co...@gmail.com> wrote:
> On Tue, Mar 28, 2017 at 2:57 AM, Christopher Sean Morrison <brl...@mac.com
> > wrote:
>
>>
>> > On Mar 27, 2017, at 8:01 PM, Shailesh Tripathi <
>> shailesh.tripathi.ec...@itbhu.ac.in> wrote:
>> >
>> > Finally, now all the errors are resolved. deviceQuery' is working fine
>> with CUDA which hints that OpenCL is also setup.
>> > Now, as I told the 'rt' command and 'rt and 'rt -z1' gives
>> quantitatively equal results.
>> > How can I make sure that 'rt -z1' is making use of GPU?
>>
>> You should see a consistent difference in performance, but this would
>> require compiling and installing both with and without OpenCL support to
>> make sure the same compilation options are being used.
>>
>> Another tell-tale sign is that the OpenCL path does not yet handle
>> booleans. If you render the havoc sample model, does it look like the
>> rendering here http://brlcad.org/wiki/User:Vasco.costa/GSoC15/logs ?
>>
>> Last but not least, it should say "Compiling OpenCL programs...” and
>> “OCLPREP” instead of “PREP” in the output.
>>
>
> Yes, the easiest way to know for sure is to look at the console log output.
>
> --
> Vasco Alexandre da Silva Costa
> PhD in Computer Engineering (Computer Graphics)
> Instituto Superior Técnico/University of Lisbon, Portugal
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> BRL-CAD Developer mailing list
> brlcad-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/brlcad-devel
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
BRL-CAD Developer mailing list
brlcad-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/brlcad-devel
