Yeah, that is usually perfectly fine. Alternatively, you can tell
configure where X11 is using the --with-x11="/usr/X11" during
configure. The end result should be pretty much the same as setting
the symbolic link. If there's a problem finding X11 during
configure, it will complain in the output. Look for any sections
that begin with }}}}}}}}}}... as well as the summary output at the
end to make sure X11 support is enabled.
Cheers!
Sean
On Apr 29, 2009, at 10:15 PM, Mike B. wrote:
Hi all,
configure reports it does not find /usr/X11. My installation
(Debian Lenny) has /usr/X11R6. It is O.K. to link the latter to
X11, that is:
ln -s X11R6 X11 ?
Running configure again (with this symbolic link), it reports
finding X11 but I'm not sure X11R6 contains the files configure needs.
Also, would appreciate help with the compilation problem (please
see my previous post `7.14.6 install fails on Debian Lenny' .
Cheers,
Mike.
----------------------------------------------------------------------
--------
Register Now & Save for Velocity, the Web Performance & Operations
Conference from O'Reilly Media. Velocity features a full day of
expert-led, hands-on workshops and two days of sessions from industry
leaders in dedicated Performance & Operations tracks. Use code
vel09scf
and Save an extra 15% before 5/3. http://p.sf.net/sfu/
velocityconf_______________________________________________
BRL-CAD Users mailing list
brlcad-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/brlcad-users
------------------------------------------------------------------------------
Register Now & Save for Velocity, the Web Performance & Operations
Conference from O'Reilly Media. Velocity features a full day of
expert-led, hands-on workshops and two days of sessions from industry
leaders in dedicated Performance & Operations tracks. Use code vel09scf
and Save an extra 15% before 5/3. http://p.sf.net/sfu/velocityconf
_______________________________________________
BRL-CAD Users mailing list
brlcad-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/brlcad-users
