followup to reconnection problem. if i disconnect display and connect it again systemd will flag unit as failed. i think this happens because Process /usr/lib/brltty/systemd-wrapper -C exits with code 3.
relevant logs: ноя 23 11:13:42 alex-pc brltty[3620]: USB URB status error 71: Ошибка протокола ноя 23 11:13:42 alex-pc brltty[3620]: braille input monitor error 19: Нет такого устройства ноя 23 11:13:42 alex-pc brltty[3620]: USB bulk transfer error 108: Невозможно отправить данные после выключения конечной точки передачи ноя 23 11:13:42 alex-pc brltty[3620]: USB: endpoint descriptor not found: B3 ноя 23 11:13:42 alex-pc systemd[1]: Stopping BRLTTY Instance: /dev/bus/usb/001/010... ноя 23 11:13:42 alex-pc systemd[1]: [email protected]: Control process exited, code=exited, status=3/NOTIMPLEMENTED ноя 23 11:13:42 alex-pc brltty[3620]: USB device descriptor read error 4: Прерван системный вызов ноя 23 11:13:43 alex-pc brltty[3620]: select: Прерван системный вызов ноя 23 11:13:43 alex-pc systemd[1]: [email protected]: Failed with result 'exit-code'. ноя 23 11:13:43 alex-pc systemd[1]: Stopped BRLTTY Instance: /dev/bus/usb/001/010. -- Sincerely, Alexander. _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://brltty.app/mailman/listinfo/brltty
