This would probably be a major overkill, but if you set up freeswitch and its port audio module, that would be completely command line and it would work. You then could use fs_cli and the pa command to make calls and you wouold have a pbx on your computer as well, but it would be a lot of configuration to go through.
On Sun, 11 Apr 2021 05:55:29 -0400, Sébastien Hinderer wrote: > > Dear all, > > which SIP client would you recommend? > > So far I tried linphone but was not very successful. > > First, I have not been able to configure the SIP acocunt. I din't find a > way to do it through linphonec, and found that the graphical client was > not accessible. > > Thus, a friend of mine created the config file for me through the > graphical interface, but even with that, I am now able to connect to > calls but the sound does not work. > > Any suggestion to help with this or any suggestion of another client to > use, preferably iin text-mode, would be warmly appreciated. > > Best wishes, > > Sébastien. > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://brltty.app/mailman/listinfo/brltty > -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una [email protected] _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://brltty.app/mailman/listinfo/brltty
