Hi David, could you help me create a standard model protocol that lights LED bulbs in such a way that one can test with the LEDs and then make the modifications to what one wants to have, what possibilities are there to develop something like that and upload it to gitub so that anyone you can modify it and adapt it to your project in such a way that a standard protocol would be created and there could be a single controller for everyone and not that each one has a different controller she that having many controllers a standard controller would be spectacular because we did not create a document in gitub where a well-commented controller is developed that lights LED bulbs as a base so that anyone can take it, analyze it and adapt it, the led bulbs would help to test and understand how it works and it would simply be enough to change the LED output to the development of each one
I plan to place my project open so that anyone can use it for the cost of my screen ... I plan to place my project open so that anyone can use it. The cost of my braille display is 1 esp32 $ 15 4 servo motors sg90 3.5 $ each A battery that can be a power Power Bank 4000 Mah Portable 5 $ Buttons for the keyboard The rest 3D printing and the box The cost of my design will be the cheapest that can exist <[email protected]> > > > > I think you should be using the official standard for this, i.e. ISO > 11548-1. Dot1 is 0X01, Dot2 is 0X02, ..., Dot8 is 0X80. Not only is this a > standard, but it's also compatible with the Unicode Braille Patterns row. > > >
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://brltty.app/mailman/listinfo/brltty
