So, I did successfully run autogen and cfg-darwin and got the following warnings:
configure: WARNING: icu support not available configure: WARNING: lua support not available configure: WARNING: Lua BrlAPI bindings not included configure: WARNING: xtst support not available configure: WARNING: xfixes support not available configure: WARNING: xt support not available configure: WARNING: louis support not available configure: WARNING: program privileges support not available on this platform configure: WARNING: Human Interface Device I/O support not available on this platform configure: WARNING: primary serial device not configured for darwin21.6.0 configure: WARNING: no native screen driver for darwin21.6.0 On Sat, 15 Oct 2022 18:49:45 -0400, Dave Mielke wrote: > > [quoted lines by Dave Mielke on 2022/10/15 at 18:46 -0400] > > I'd better correct what I just said. I wrote the following too quickly. > > >the autogen script is written in tcl. > > What I should've written is that brltty's autogen script needs tcl. The > reason is that it runs brltty's gendeps script, and that one is written in > tcl. > > -- > I believe the Bible to be the very Word of God: http://Mielke.cc/bible/ > Dave Mielke | 2213 Fox Crescent | WebHome: http://Mielke.cc/ > EMail: [email protected] | Ottawa, Ontario | Twitter: @Dave_Mielke > Phone: +1 613 726 0014 | Canada K2A 1H7 | -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici wb2una [email protected] _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://brltty.app/mailman/listinfo/brltty
