On Wed, 30 Oct 2024, 高生旺 wrote:
>
> Hi, Yannick:
>
> The outputs are as following:
>
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9 Hub
> bDeviceSubClass 0
> bDeviceProtocol 1 Single TT
> bMaxPacketSize0 64
> idVendor 0x1d6b Linux Foundation
> idProduct 0x0002 2.0 root hub
> bcdDevice 6.06
> iManufacturer 3 Linux 6.6.28+rpt-rpi-v7 dwc_otg_hcd
> iProduct 2 DWC OTG Controller
> iSerial 1 3f980000.usb
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 0x0019
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0xe0
> Self Powered
> Remote Wakeup
> MaxPower 0mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9 Hub
> bInterfaceSubClass 0
> bInterfaceProtocol 0 Full speed (or root) hub
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 3
> Transfer Type Interrupt
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0004 1x 4 bytes
> bInterval 12
> Thank you!
>
> On Tue, 29 Oct 2024, Yannick PLASSIARD wrote:
>
> > Date: Tue, 29 Oct 2024 08:01:51 +0100
> > From: Yannick PLASSIARD <[email protected]>
> > To: Informal discussion between users and developers of BRLTTY.
> > <[email protected]>, 高生旺 <[email protected]>
> > Subject: Re: [BRLTTY] New EuroBraille model(s).
> >
> > Hi,
> >
> >
> > Feel free to contact me in private so that we can organize tests.
> >
> > I'll probably need some initial infos to start with: could you plug your
> > BNote to a linux box, put it into "terminal mode" (the same mode used to
> > control a computer on other OSes), and then on your linux box type:
> >
> > lsusb -v |tee ~/usb-output.txt
> >
> >
> > this will print all attached USB devices and their associated information,
> > and this is needed by Brltty to identify a Braille device before
> > attempting to connect to it.
> >
> >
> > If the above command fails, you may need to run it using "sudo" or other
> > alternatives to gain root access.
> >
> >
> > Thanks,
> >
> >
> > Yannick
> >
> >
> > Le 29/10/2024 à 11:21, 高生旺 a écrit :
> > > Me.
> > >
> > > On Mon, 28 Oct 2024, Dave Mielke wrote:
> > >
> > > > Date: Mon, 28 Oct 2024 05:40:57 -0400
> > > > From: Dave Mielke <[email protected]>
> > > > Reply-To: Informal discussion between users and developers of BRLTTY.
> > > > <[email protected]>
> > > > To: Informal discussion between users and developers of BRLTTY.
> > > > <[email protected]>
> > > > Subject: Re: [BRLTTY] New EuroBraille model(s).
> > > >
> > > > [quoted lines by Yannick PLASSIARD on 2024/10/28 at 10:33 +0100]
> > > >
> > > > > should someone have a BNote device, I could do some tests updating
> > > > > the eurobraille driver to make it recognize the device and see if
> > > > > it's suffiscient to have at least a basic support to start with.
> > > >
> > > > Sure. Does anyone on this list already have a EuroBraille BNote?
> > > >
> > > > --
> > > > I believe the Bible to be the very Word of God:
> > > > http://Mielke.cc/bible/
> > > > Dave Mielke | 2213 Fox Crescent | WebHome:
> > > > http://Mielke.cc/
> > > > EMail: [email protected] | Ottawa, Ontario | Twitter: @Dave_Mielke
> > > > Phone: +1 613 726 0014 | Canada K2A 1H7 |
> > > >
> > > > http://mielke.cc/xmother.html (Letter from a Feminist ex-Mother)
> > > > _______________________________________________
> > > > This message was sent via the BRLTTY mailing list.
> > > > To post a message, send an e-mail to: [email protected]
> > > > For general information, go to:
> > > > http://brltty.app/mailman/listinfo/brltty
> > > >
> > > _______________________________________________
> > > This message was sent via the BRLTTY mailing list.
> > > To post a message, send an e-mail to: [email protected]
> > > For general information, go to:
> > > http://brltty.app/mailman/listinfo/brltty
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://brltty.app/mailman/listinfo/brltty
