Hello! I prepared https://github.com/brltty/brltty/pull/505
I found the following problems during a longer test: 1. when disconnecting the display from the computer brltty starts spamming /dev/hidraw* access errors again. maybe wee should hide these messages by default... 2. if I don't turn off computer bt module, but only the display orca hangs until the display is connected back via bt. On Wed, Dec 03, 2025 at 02:10:07PM -0500, Dave Mielke wrote: > [quoted lines by Alexander Epaneshnikov on 2025/12/03 at 14:05 +0300] > > >If brltty devs are ok with this implementation I can adapt this rule to > >Autostart/Udev/hid.rules > >and send a pr. > > I'm sorry I forgot to answer you. That's the right file but I was hoping the > issue could be resolved in a different way. After the label BRLTTY_HID_FILTER > there's a rule for the NLS Zoommax. I was hoping yo'd be able to add a > similar rule for your device. You can use the brltty command brltty-hid to > find out what the device's HID name is. > > -- > I believe the Bible to be the very Word of God: http://Mielke.cc/bible/ > Dave Mielke | 2213 Fox Crescent | WebHome: http://Mielke.cc/ > EMail: [email protected] | Ottawa, Ontario | Twitter: @Dave_Mielke > Phone: +1 613 726 0014 | Canada K2A 1H7 | > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > http://mielke.cc/xmother.html (Letter from a Feminist ex-Mother) > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://brltty.app/mailman/listinfo/brltty -- Sincerely, Alexander _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://brltty.app/mailman/listinfo/brltty
