On Mon, Feb 27, 2017 at 04:55:37PM -0500, Dave Mielke wrote: > [quoted lines by Adrian van Bloois on 2017/02/27 at 22:46 +0100] > > Brltty isn't seeing your Alva. When you log with -lusb, you'll see lines like > this one (taken from your log): > > USB: testing device: vendor=1D6B product=0003 > > For an Alva BC680, the vendor ID is 0798 and the product ID is 0680. Perhaps > you could try reconnecting your USB cable. Also, of course, be sure that the > Alva is configured for USB instead of for Bluetooth. When I plug the display to my laptop it immediately sees it and brltty works fine, so the display must be configured for usb.
> > -- > Dave Mielke | 2213 Fox Crescent | The Bible is the very Word of God. > Phone: 1-613-726-0014 | Ottawa, Ontario | http://Mielke.cc/bible/ > EMail: [email protected] | Canada K2A 1H7 | http://FamilyRadio.org/ > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://brltty.com/mailman/listinfo/brltty -- Adri P. van Bloois "Elegance is not a dispensable luxury but a factor that decides between success and failure." Edsger W. Dijkstra _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://brltty.com/mailman/listinfo/brltty
