Okay, I did zzzz and then pressed a cursor routing button and then after
brltty came up I did an enter and did the same with aaaa. Then I did
killall -9 brltty
On the zzzz group I believe I had to cursor route twice before the
unwanted result occurred but with aaaa it happened immediately.
--
Cheryl
May the words of my mouth
and the meditation of my heart
be acceptable to You, Lord,
my rock and my Redeemer.
(Psalm 19:14 HCSB)
On Mon, 29 Jan 2018, Dave Mielke wrote:
[quoted lines by Cheryl Homiak <[email protected]> on 2018/01/29 at 12:45
-0600]
Here is the log.
The log doesn't contain any routing key presses at all. Either it's the wrong
log or maybe brltty is actually restarting and overwriting the log.
Maybe you could do something unique (e.g. typing the letter z four times)
before you press the routing key, and then doing something else unique
afterwards. That might help us figure out what's happening.
--
I believe the Bible to be the very Word of God: http://Mielke.cc/bible/
Dave Mielke | 2213 Fox Crescent | WebHome: http://Mielke.cc/
EMail: [email protected] | Ottawa, Ontario | Twitter: @Dave_Mielke
Phone: 1-613-726-0014 | Canada K2A 1H7 |
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://brltty.com/mailman/listinfo/brltty
2018-01-29@13:42:16.948 [main] BRLTTY 5.5 rev BRLTTY-5.5-152-g2eeb81d6
[http://brltty.com/]
2018-01-29@13:42:16.948 [main] lock descriptor allocated:
queue-discarded-elements
2018-01-29@13:42:16.948 [main] Log Level: debug,brlkeys,scrdrv,csrrtg
2018-01-29@13:42:16.948 [main] pushed command environment: initial
2018-01-29@13:42:16.948 [main] report listener registered: 0: 0x1022d65a0
2018-01-29@13:42:16.949 [main] program exit event added: screen-data
2018-01-29@13:42:16.950 [main] Working Directory: /Users/cherylhomiak
2018-01-29@13:42:16.950 [main] Configuration File: /etc/brltty.conf
2018-01-29@13:42:16.950 [main] Preferences File:
/Users/chomiak/.brltty/brltty.prefs
2018-01-29@13:42:16.951 [main] cannot create directory: /var/lib/brltty:
Permission denied
2018-01-29@13:42:16.951 [main] program exit event added: tunes
2018-01-29@13:42:16.951 [main] tune thread state change: 0 -> 1
2018-01-29@13:42:16.952 [main] tune thread state change: 1 -> 3
2018-01-29@13:42:16.952 [main] regions: text=0.0 status=0.0
2018-01-29@13:42:16.952 [main] shifts: full=1 half=0 vertical=5
2018-01-29@13:42:16.952 [main] Updatable Directory: /var/lib/brltty
2018-01-29@13:42:16.953 [main] Writable Directory: /var/run/brltty
2018-01-29@13:42:16.953 [main] Drivers Directory: /lib/brltty
2018-01-29@13:42:16.953 [main] Tables Directory: /etc/brltty
2018-01-29@13:42:16.953 [main] compiling text table: /etc/brltty/Text/en_US.ttb
2018-01-29@13:42:16.954 [main] file opened: /etc/brltty/Text/en_US.ttb fd=8
2018-01-29@13:42:16.954 [main] including data file: /etc/brltty/Text/en_US.ttb
2018-01-29@13:42:16.954 [main] file opened: /etc/brltty/Text/ltr-latin.tti fd=9
2018-01-29@13:42:16.954 [main] including data file:
/etc/brltty/Text/ltr-latin.tti
2018-01-29@13:42:16.955 [main] file opened: /etc/brltty/Text/ltr-alias.tti fd=10
2018-01-29@13:42:16.955 [main] including data file:
/etc/brltty/Text/ltr-alias.tti
2018-01-29@13:42:16.957 [main] file opened: /etc/brltty/Text/ctl-latin.tti fd=9
2018-01-29@13:42:16.957 [main] including data file:
/etc/brltty/Text/ctl-latin.tti
2018-01-29@13:42:16.957 [main] file opened: /etc/brltty/Text/num-nemeth.tti fd=9
2018-01-29@13:42:16.957 [main] including data file:
/etc/brltty/Text/num-nemeth.tti
2018-01-29@13:42:16.958 [main] file opened: /etc/brltty/Text/num-alias.tti fd=10
2018-01-29@13:42:16.958 [main] including data file:
/etc/brltty/Text/num-alias.tti
2018-01-29@13:42:16.959 [main] file opened: /etc/brltty/Text/common.tti fd=9
2018-01-29@13:42:16.959 [main] including data file: /etc/brltty/Text/common.tti
2018-01-29@13:42:16.959 [main] file opened: /etc/brltty/Text/spaces.tti fd=10
2018-01-29@13:42:16.959 [main] including data file: /etc/brltty/Text/spaces.tti
2018-01-29@13:42:16.960 [main] file opened: /etc/brltty/Text/boxes.tti fd=10
2018-01-29@13:42:16.960 [main] including data file: /etc/brltty/Text/boxes.tti
2018-01-29@13:42:16.960 [main] file opened: /etc/brltty/Text/blocks.tti fd=10
2018-01-29@13:42:16.960 [main] including data file: /etc/brltty/Text/blocks.tti
2018-01-29@13:42:16.961 [main] Text Table: en_US
2018-01-29@13:42:16.961 [main] program exit event added: text-table
2018-01-29@13:42:16.961 [main] Attributes Table: left_right
2018-01-29@13:42:16.961 [main] program exit event added: attributes-table
2018-01-29@13:42:16.962 [main] program exit event added: contraction-table
2018-01-29@13:42:16.962 [main] compiling contraction table:
/etc/brltty/Contraction/en-us-g2.ctb
2018-01-29@13:42:16.962 [main] file opened:
/etc/brltty/Contraction/en-us-g2.ctb fd=8
2018-01-29@13:42:16.962 [main] including data file:
/etc/brltty/Contraction/en-us-g2.ctb
2018-01-29@13:42:16.964 [main] file opened:
/etc/brltty/Contraction/countries.cti fd=9
2018-01-29@13:42:16.964 [main] including data file:
/etc/brltty/Contraction/countries.cti
2018-01-29@13:42:16.965 [main] Contraction Table: en-us-g2
2018-01-29@13:42:16.965 [main] Keyboard Property: type=
2018-01-29@13:42:16.965 [main] Keyboard Property: vendor=
2018-01-29@13:42:16.965 [main] Keyboard Property: product=
2018-01-29@13:42:16.965 [main] program exit event added: keyboard-table
2018-01-29@13:42:16.966 [main] Keyboard Table: none
2018-01-29@13:42:16.966 [main] program exit event added: screen-driver
2018-01-29@13:42:16.966 [main] activity action request: screen-driver: start
2018-01-29@13:42:16.966 [main] activity state change: screen-driver:
4[preparing]
2018-01-29@13:42:16.967 [main] activity state change: screen-driver: 1[prepared]
2018-01-29@13:42:16.967 [main] activity state change: screen-driver:
2[scheduled]
2018-01-29@13:42:16.967 [main] program exit event added: braille-data
2018-01-29@13:42:16.967 [main] program exit event added: braille-driver
2018-01-29@13:42:16.968 [main] activity action request: braille-driver: start
2018-01-29@13:42:16.968 [main] activity state change: braille-driver:
4[preparing]
2018-01-29@13:42:16.968 [main] Braille Display Dimensions: 1 row, 1 column
2018-01-29@13:42:16.968 [main] regions: text=0.1 status=0.0
2018-01-29@13:42:16.968 [main] shifts: full=1 half=0 vertical=5
2018-01-29@13:42:16.969 [main] activity state change: braille-driver:
1[prepared]
2018-01-29@13:42:16.969 [main] activity state change: braille-driver:
2[scheduled]
2018-01-29@13:42:16.969 [main] program exit event added: speech-data
2018-01-29@13:42:16.970 [main] program exit event added: speech-driver
2018-01-29@13:42:16.970 [main] activity action request: speech-driver: start
2018-01-29@13:42:16.970 [main] activity state change: speech-driver:
4[preparing]
2018-01-29@13:42:16.970 [main] activity state change: speech-driver: 1[prepared]
2018-01-29@13:42:16.971 [main] activity state change: speech-driver:
2[scheduled]
2018-01-29@13:42:16.971 [main] Speech Input: none
2018-01-29@13:42:16.971 [main] program exit event added: sessions
2018-01-29@13:42:16.971 [main] pushed command environment: main
2018-01-29@13:42:16.972 [main] pushed command handler: unhandled
2018-01-29@13:42:16.972 [main] pushed command handler: miscellaneous
2018-01-29@13:42:16.972 [main] pushed command handler: learn
2018-01-29@13:42:16.972 [main] pushed command handler: speech
2018-01-29@13:42:16.973 [main] pushed command handler: clipboard
2018-01-29@13:42:16.973 [main] pushed command handler: preferences
2018-01-29@13:42:16.973 [main] pushed command handler: toggle
2018-01-29@13:42:16.973 [main] report listener registered: 3: 0x1022df9f0
2018-01-29@13:42:16.973 [main] pushed command handler: touch
2018-01-29@13:42:16.974 [main] report listener registered: 0: 0x1022dada0
2018-01-29@13:42:16.974 [main] pushed command handler: keycodes
2018-01-29@13:42:16.974 [main] report listener registered: 0: 0x1022da6d0
2018-01-29@13:42:16.974 [main] pushed command handler: input
2018-01-29@13:42:16.975 [main] pushed command handler: navigation
2018-01-29@13:42:16.975 [main] pushed command handler: screen
2018-01-29@13:42:16.975 [main] pushed command handler: custom
2018-01-29@13:42:16.975 [main] pushed command handler: API
2018-01-29@13:42:16.975 [main] activity state change: screen-driver: 6[starting]
2018-01-29@13:42:16.976 [main] checking for screen driver: sc
2018-01-29@13:42:16.976 [main] initializing screen driver: sc
2018-01-29@13:42:16.976 [main] Shared memory file system object:
/Users/cherylhomiak
2018-01-29@13:42:16.977 [main] Trying shared memory key: 0X6206CFEE
2018-01-29@13:42:16.977 [main] Screen image shared memory key: 0X6206CFEE
2018-01-29@13:42:16.977 [main] Screen Driver: sc [Screen]
2018-01-29@13:42:16.977 [main] Screen Screen Driver:
2018-01-29@13:42:16.978 [main] activity state change: screen-driver: 3[started]
2018-01-29@13:42:16.978 [main] activity state change: braille-driver:
6[starting]
2018-01-29@13:42:16.978 [main] checking braille device: usb:
2018-01-29@13:42:16.978 [main] checking for braille driver: hm
2018-01-29@13:42:16.979 [main] initializing braille driver: hm -> usb:
2018-01-29@13:42:16.986 [main] USB: Manufacturer Name: Samsung
2018-01-29@13:42:16.986 [main] USB: Product Description: Generic USB Serial
2018-01-29@13:42:16.986 [main] usbDisableAutosuspend error 78: Function not
implemented.
2018-01-29@13:42:16.986 [main] USB device opened: vendor=045E product=930B
2018-01-29@13:42:16.987 [main] program exit event added:
sorted-usb-serial-adapters
2018-01-29@13:42:17.008 [main] detected: Braille Edge
2018-01-29@13:42:17.029 [main] activity state change: speech-driver: 6[starting]
2018-01-29@13:42:17.030 [main] no autodetectable speech drivers
2018-01-29@13:42:17.030 [main] checking for speech driver: no
2018-01-29@13:42:17.030 [main] initializing speech driver: no
2018-01-29@13:42:17.030 [main] Speech Driver: no [NoSpeech]
2018-01-29@13:42:17.031 [main] NoSpeech Speech Driver:
2018-01-29@13:42:17.031 [main] activity state change: speech-driver: 3[started]
2018-01-29@13:42:17.272 [main] Braille Display Dimensions: 1 row, 40 columns
2018-01-29@13:42:17.273 [main] regions: text=0.40 status=0.0
2018-01-29@13:42:17.273 [main] shifts: full=40 half=20 vertical=5
2018-01-29@13:42:17.273 [main] Key Bindings: edge
2018-01-29@13:42:17.273 [main] program exit event added: sorted-command-table
2018-01-29@13:42:17.274 [main] file opened: /etc/brltty/Input/hm/edge.ktb fd=12
2018-01-29@13:42:17.274 [main] including data file:
/etc/brltty/Input/hm/edge.ktb
2018-01-29@13:42:17.274 [main] file opened: /etc/brltty/Input/hm/common.kti
fd=13
2018-01-29@13:42:17.275 [main] including data file:
/etc/brltty/Input/hm/common.kti
2018-01-29@13:42:17.275 [main] file opened: /etc/brltty/Input/hm/scroll.kti
fd=13
2018-01-29@13:42:17.275 [main] including data file:
/etc/brltty/Input/hm/scroll.kti
2018-01-29@13:42:17.275 [main] file opened: /etc/brltty/Input/hm/left.kti fd=13
2018-01-29@13:42:17.276 [main] including data file:
/etc/brltty/Input/hm/left.kti
2018-01-29@13:42:17.276 [main] file opened: /etc/brltty/Input/hm/right.kti fd=13
2018-01-29@13:42:17.276 [main] including data file:
/etc/brltty/Input/hm/right.kti
2018-01-29@13:42:17.276 [main] file opened: /etc/brltty/Input/hm/f18.kti fd=13
2018-01-29@13:42:17.277 [main] including data file: /etc/brltty/Input/hm/f18.kti
2018-01-29@13:42:17.277 [main] file opened: /etc/brltty/Input/hm/contexts.kti
fd=13
2018-01-29@13:42:17.277 [main] including data file:
/etc/brltty/Input/hm/contexts.kti
2018-01-29@13:42:17.278 [main] file opened: /etc/brltty/Input/hm/braille.kti
fd=13
2018-01-29@13:42:17.278 [main] including data file:
/etc/brltty/Input/hm/braille.kti
2018-01-29@13:42:17.278 [main] program exit event added:
sorted-keyboard-functions
2018-01-29@13:42:17.278 [main] file opened: /etc/brltty/Input/hm/../chords.kti
fd=14
2018-01-29@13:42:17.279 [main] including data file:
/etc/brltty/Input/hm/../chords.kti
2018-01-29@13:42:17.279 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=15
2018-01-29@13:42:17.279 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:17.280 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=15
2018-01-29@13:42:17.280 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:17.280 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=15
2018-01-29@13:42:17.280 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:17.281 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=15
2018-01-29@13:42:17.281 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:17.281 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=15
2018-01-29@13:42:17.282 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:17.282 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=15
2018-01-29@13:42:17.282 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:17.282 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=15
2018-01-29@13:42:17.283 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:17.283 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=15
2018-01-29@13:42:17.283 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:17.284 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=15
2018-01-29@13:42:17.284 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:17.284 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=15
2018-01-29@13:42:17.284 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:17.285 [main] file opened: /etc/brltty/Input/hm/../menu.kti
fd=15
2018-01-29@13:42:17.285 [main] including data file:
/etc/brltty/Input/hm/../menu.kti
2018-01-29@13:42:17.287 [main] Key Table: /etc/brltty/Input/hm/edge.ktb
2018-01-29@13:42:17.287 [main] constructing special screen: help
2018-01-29@13:42:17.287 [main] Braille Driver: hm [HIMS]
2018-01-29@13:42:17.288 [main] HIMS Braille Driver:
2018-01-29@13:42:17.288 [main] Braille Device: usb:
2018-01-29@13:42:17.288 [main] Old Preferences File: /etc/brltty-hm.prefs
2018-01-29@13:42:17.288 [main] BrlAPI Server: release 0.6.7
2018-01-29@13:42:17.288 [main] API Parameter: auth=
2018-01-29@13:42:17.289 [main] API Parameter: host=
2018-01-29@13:42:17.289 [main] API Parameter: stacksize=
2018-01-29@13:42:17.289 [main] program exit event added: address-table
2018-01-29@13:42:17.289 [main] program exit event added: api-server
2018-01-29@13:42:17.290 [main] report listener registered: 0: 0x102307e90
2018-01-29@13:42:17.290 [main] cannot open file: /etc/brltty-hm.prefs: No such
file or directory
2018-01-29@13:42:17.290 [main] regions: text=0.40 status=0.0
2018-01-29@13:42:17.290 [main] shifts: full=40 half=20 vertical=5
2018-01-29@13:42:17.291 [main] program exit event added: alert-tunes
2018-01-29@13:42:17.291 [main] activity state change: braille-driver: 3[started]
2018-01-29@13:42:17.312 [main] report listener unregistered: 0: 0x102307e90
2018-01-29@13:42:17.312 [main] pushed command environment: message
2018-01-29@13:42:17.312 [main] pushed command handler: message
2018-01-29@13:42:17.347 [tune-thread] MIDI enabled
2018-01-29@13:42:17.348 [tune-thread] tone: MSecs:60 Note:64
2018-01-29@13:42:17.410 [tune-thread] tone: MSecs:100 Note:69
2018-01-29@13:42:19.441 [tune-thread] MIDI disabled
2018-01-29@13:42:21.314 [main] popped command handler: message
2018-01-29@13:42:21.315 [main] popped command environment: message
2018-01-29@13:42:21.315 [main] report listener registered: 0: 0x102307e90
2018-01-29@13:42:33.467 [main] program exit event added: command-queue
2018-01-29@13:42:33.467 [main] brl key press: RoutingKey.12 (Ctx:2 Grp:1
Num:11) -> NOOP (Cmd:000000)
2018-01-29@13:42:33.467 [main] brl key release: RoutingKey.12 (Ctx:2 Grp:1
Num:11) -> ROUTE (Cmd:00010B)
2018-01-29@13:42:33.489 [main] command: 000000 (NOOP: do nothing)
2018-01-29@13:42:33.510 [main] command: 00010B (ROUTE: bring screen cursor to
character #12)
2018-01-29@13:42:33.511 [cursor-routing] program exit event added:
cursor-routing
2018-01-29@13:42:33.512 [cursor-routing] Shared memory file system object:
/Users/cherylhomiak
2018-01-29@13:42:33.512 [cursor-routing] Trying shared memory key: 0X6206CFEE
2018-01-29@13:42:33.512 [cursor-routing] Screen image shared memory key:
0X6206CFEE
2018-01-29@13:42:33.513 [cursor-routing] cursor routing: screen: num=1 cols=80
rows=24
2018-01-29@13:42:33.513 [cursor-routing] cursor routing: from: [14,23]
2018-01-29@13:42:33.513 [cursor-routing] cursor routing: to: [-1,23]
2018-01-29@13:42:33.514 [cursor-routing] cursor routing: to: [11,23]
2018-01-29@13:42:33.514 [cursor-routing] cursor routing: move: left
2018-01-29@13:42:33.514 [cursor-routing] screen driver: insert key: 0XF804
2018-01-29@13:42:33.514 [cursor-routing] screen driver: insert bytes: 1B 5B 44
2018-01-29@13:42:33.515 [cursor-routing] starting host command: screen -p 1 -X
stuff [D
2018-01-29@13:42:33.523 [cursor-routing] host command exit status: 0: screen
2018-01-29@13:42:33.524 [cursor-routing] cursor routing: moved: [14,23] ->
[13,23] (2ms)
2018-01-29@13:42:33.525 [tune-thread] MIDI enabled
2018-01-29@13:42:33.525 [tune-thread] tone: MSecs:10 Note:55
2018-01-29@13:42:33.530 [cursor-routing] cursor routing: move: left
2018-01-29@13:42:33.531 [cursor-routing] screen driver: insert key: 0XF804
2018-01-29@13:42:33.531 [cursor-routing] screen driver: insert bytes: 1B 5B 44
2018-01-29@13:42:33.531 [cursor-routing] starting host command: screen -p 1 -X
stuff [D
2018-01-29@13:42:33.537 [tune-thread] tone: MSecs:60 Note:0
2018-01-29@13:42:33.539 [cursor-routing] host command exit status: 0: screen
2018-01-29@13:42:33.540 [cursor-routing] cursor routing: moved: [13,23] ->
[12,23] (2ms)
2018-01-29@13:42:33.546 [cursor-routing] cursor routing: move: left
2018-01-29@13:42:33.546 [cursor-routing] screen driver: insert key: 0XF804
2018-01-29@13:42:33.547 [cursor-routing] screen driver: insert bytes: 1B 5B 44
2018-01-29@13:42:33.547 [cursor-routing] starting host command: screen -p 1 -X
stuff [D
2018-01-29@13:42:33.555 [cursor-routing] host command exit status: 0: screen
2018-01-29@13:42:33.556 [cursor-routing] cursor routing: moved: [12,23] ->
[11,23] (2ms)
2018-01-29@13:42:33.602 [tune-thread] tone: MSecs:15 Note:60
2018-01-29@13:42:33.619 [tune-thread] tone: MSecs:60 Note:64
2018-01-29@13:42:33.684 [tune-thread] tone: MSecs:20 Note:76
2018-01-29@13:42:35.714 [tune-thread] MIDI disabled
2018-01-29@13:42:38.891 [main] brl key press: RoutingKey.11 (Ctx:2 Grp:1
Num:10) -> NOOP (Cmd:000000)
2018-01-29@13:42:38.891 [main] brl key release: RoutingKey.11 (Ctx:2 Grp:1
Num:10) -> ROUTE (Cmd:00010A)
2018-01-29@13:42:38.914 [main] command: 000000 (NOOP: do nothing)
2018-01-29@13:42:38.914 [main] command: 00010A (ROUTE: bring screen cursor to
character #11)
2018-01-29@13:42:38.916 [cursor-routing] Shared memory file system object:
/Users/cherylhomiak
2018-01-29@13:42:38.916 [cursor-routing] Trying shared memory key: 0X6206CFEE
2018-01-29@13:42:38.916 [cursor-routing] Screen image shared memory key:
0X6206CFEE
2018-01-29@13:42:38.917 [cursor-routing] cursor routing: screen: num=1 cols=80
rows=24
2018-01-29@13:42:38.917 [cursor-routing] cursor routing: from: [11,23]
2018-01-29@13:42:38.917 [cursor-routing] cursor routing: to: [-1,23]
2018-01-29@13:42:38.917 [cursor-routing] cursor routing: to: [10,23]
2018-01-29@13:42:38.918 [cursor-routing] cursor routing: move: left
2018-01-29@13:42:38.918 [cursor-routing] screen driver: insert key: 0XF804
2018-01-29@13:42:38.918 [cursor-routing] screen driver: insert bytes: 1B 5B 44
2018-01-29@13:42:38.918 [cursor-routing] starting host command: screen -p 1 -X
stuff [D
2018-01-29@13:42:38.926 [cursor-routing] host command exit status: 0: screen
2018-01-29@13:42:38.928 [cursor-routing] cursor routing: moved: [11,23] ->
[10,23] (2ms)
2018-01-29@13:42:38.929 [tune-thread] MIDI enabled
2018-01-29@13:42:38.929 [tune-thread] tone: MSecs:10 Note:55
2018-01-29@13:42:38.935 [main] Darwin error 0XFFFFFFFFE00002EB.
2018-01-29@13:42:38.935 [main] USB endpoint read error 89: Operation canceled.
2018-01-29@13:42:38.935 [main] command: 00004A (RESTARTBRL: restart braille
driver)
2018-01-29@13:42:38.936 [main] activity action request: braille-driver: stop
2018-01-29@13:42:38.936 [main] activity state change: braille-driver:
9[stopping]
2018-01-29@13:42:38.936 [main] report listener unregistered: 0: 0x102307e90
2018-01-29@13:42:38.939 [main] activity state change: braille-driver: 0[stopped]
2018-01-29@13:42:38.939 [main] reinitializing braille driver
2018-01-29@13:42:38.940 [main] activity action request: braille-driver: start
2018-01-29@13:42:38.940 [main] activity state change: braille-driver:
4[preparing]
2018-01-29@13:42:38.940 [main] Braille Display Dimensions: 1 row, 1 column
2018-01-29@13:42:38.940 [main] regions: text=0.1 status=0.0
2018-01-29@13:42:38.941 [main] shifts: full=1 half=0 vertical=5
2018-01-29@13:42:38.941 [main] activity state change: braille-driver:
1[prepared]
2018-01-29@13:42:38.941 [main] activity state change: braille-driver:
2[scheduled]
2018-01-29@13:42:38.941 [main] activity state change: braille-driver:
6[starting]
2018-01-29@13:42:38.941 [main] checking braille device: usb:
2018-01-29@13:42:38.942 [main] checking for braille driver: hm
2018-01-29@13:42:38.942 [tune-thread] tone: MSecs:60 Note:0
2018-01-29@13:42:38.942 [main] initializing braille driver: hm -> usb:
2018-01-29@13:42:38.947 [main] USB: Manufacturer Name: Samsung
2018-01-29@13:42:38.947 [main] USB: Product Description: Generic USB Serial
2018-01-29@13:42:38.947 [main] usbDisableAutosuspend error 78: Function not
implemented.
2018-01-29@13:42:38.947 [main] USB device opened: vendor=045E product=930B
2018-01-29@13:42:38.969 [main] detected: Braille Edge
2018-01-29@13:42:39.004 [tune-thread] tone: MSecs:15 Note:60
2018-01-29@13:42:39.023 [tune-thread] tone: MSecs:60 Note:64
2018-01-29@13:42:39.087 [tune-thread] tone: MSecs:20 Note:76
2018-01-29@13:42:39.111 [tune-thread] tone: MSecs:60 Note:64
2018-01-29@13:42:39.176 [tune-thread] tone: MSecs:60 Note:57
2018-01-29@13:42:40.269 [main] Braille Display Dimensions: 1 row, 40 columns
2018-01-29@13:42:40.270 [main] regions: text=0.40 status=0.0
2018-01-29@13:42:40.270 [main] shifts: full=40 half=20 vertical=5
2018-01-29@13:42:40.270 [main] Key Bindings: edge
2018-01-29@13:42:40.270 [main] file opened: /etc/brltty/Input/hm/edge.ktb fd=17
2018-01-29@13:42:40.271 [main] including data file:
/etc/brltty/Input/hm/edge.ktb
2018-01-29@13:42:40.271 [main] file opened: /etc/brltty/Input/hm/common.kti
fd=18
2018-01-29@13:42:40.271 [main] including data file:
/etc/brltty/Input/hm/common.kti
2018-01-29@13:42:40.271 [main] file opened: /etc/brltty/Input/hm/scroll.kti
fd=18
2018-01-29@13:42:40.272 [main] including data file:
/etc/brltty/Input/hm/scroll.kti
2018-01-29@13:42:40.272 [main] file opened: /etc/brltty/Input/hm/left.kti fd=18
2018-01-29@13:42:40.272 [main] including data file:
/etc/brltty/Input/hm/left.kti
2018-01-29@13:42:40.273 [main] file opened: /etc/brltty/Input/hm/right.kti fd=18
2018-01-29@13:42:40.273 [main] including data file:
/etc/brltty/Input/hm/right.kti
2018-01-29@13:42:40.273 [main] file opened: /etc/brltty/Input/hm/f18.kti fd=18
2018-01-29@13:42:40.273 [main] including data file: /etc/brltty/Input/hm/f18.kti
2018-01-29@13:42:40.274 [main] file opened: /etc/brltty/Input/hm/contexts.kti
fd=18
2018-01-29@13:42:40.274 [main] including data file:
/etc/brltty/Input/hm/contexts.kti
2018-01-29@13:42:40.274 [main] file opened: /etc/brltty/Input/hm/braille.kti
fd=18
2018-01-29@13:42:40.274 [main] including data file:
/etc/brltty/Input/hm/braille.kti
2018-01-29@13:42:40.275 [main] file opened: /etc/brltty/Input/hm/../chords.kti
fd=19
2018-01-29@13:42:40.275 [main] including data file:
/etc/brltty/Input/hm/../chords.kti
2018-01-29@13:42:40.275 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:42:40.275 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:40.276 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:42:40.276 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:40.276 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:42:40.276 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:40.277 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:42:40.277 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:40.277 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:42:40.277 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:40.278 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:42:40.278 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:40.278 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:42:40.278 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:40.279 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:42:40.279 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:40.279 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:42:40.279 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:40.280 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:42:40.280 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:42:40.280 [main] file opened: /etc/brltty/Input/hm/../menu.kti
fd=20
2018-01-29@13:42:40.281 [main] including data file:
/etc/brltty/Input/hm/../menu.kti
2018-01-29@13:42:40.282 [main] Key Table: /etc/brltty/Input/hm/edge.ktb
2018-01-29@13:42:40.283 [main] Braille Driver: hm [HIMS]
2018-01-29@13:42:40.283 [main] HIMS Braille Driver:
2018-01-29@13:42:40.283 [main] Braille Device: usb:
2018-01-29@13:42:40.284 [main] Old Preferences File: /etc/brltty-hm.prefs
2018-01-29@13:42:40.284 [main] report listener registered: 0: 0x102307e90
2018-01-29@13:42:40.284 [main] cannot open file: /etc/brltty-hm.prefs: No such
file or directory
2018-01-29@13:42:40.284 [main] regions: text=0.40 status=0.0
2018-01-29@13:42:40.285 [main] shifts: full=40 half=20 vertical=5
2018-01-29@13:42:40.285 [main] activity state change: braille-driver: 3[started]
2018-01-29@13:42:40.285 [tune-thread] tone: MSecs:60 Note:64
2018-01-29@13:42:40.308 [main] report listener unregistered: 0: 0x102307e90
2018-01-29@13:42:40.308 [main] pushed command environment: message
2018-01-29@13:42:40.308 [main] pushed command handler: message
2018-01-29@13:42:40.350 [tune-thread] tone: MSecs:100 Note:69
2018-01-29@13:42:42.383 [tune-thread] MIDI disabled
2018-01-29@13:42:44.311 [main] popped command handler: message
2018-01-29@13:42:44.311 [main] popped command environment: message
2018-01-29@13:42:44.312 [main] report listener registered: 0: 0x102307e90
2018-01-29@13:43:05.402 [main] brl key press: RoutingKey.13 (Ctx:2 Grp:1
Num:12) -> NOOP (Cmd:000000)
2018-01-29@13:43:05.402 [main] brl key release: RoutingKey.13 (Ctx:2 Grp:1
Num:12) -> ROUTE (Cmd:00010C)
2018-01-29@13:43:05.425 [main] command: 000000 (NOOP: do nothing)
2018-01-29@13:43:05.425 [main] command: 00010C (ROUTE: bring screen cursor to
character #13)
2018-01-29@13:43:05.426 [cursor-routing] Shared memory file system object:
/Users/cherylhomiak
2018-01-29@13:43:05.427 [cursor-routing] Trying shared memory key: 0X6206CFEE
2018-01-29@13:43:05.427 [cursor-routing] Screen image shared memory key:
0X6206CFEE
2018-01-29@13:43:05.428 [cursor-routing] cursor routing: screen: num=1 cols=80
rows=24
2018-01-29@13:43:05.428 [cursor-routing] cursor routing: from: [14,23]
2018-01-29@13:43:05.428 [cursor-routing] cursor routing: to: [-1,23]
2018-01-29@13:43:05.428 [cursor-routing] cursor routing: to: [12,23]
2018-01-29@13:43:05.428 [cursor-routing] cursor routing: move: left
2018-01-29@13:43:05.429 [cursor-routing] screen driver: insert key: 0XF804
2018-01-29@13:43:05.429 [cursor-routing] screen driver: insert bytes: 1B 5B 44
2018-01-29@13:43:05.429 [cursor-routing] starting host command: screen -p 1 -X
stuff [D
2018-01-29@13:43:05.437 [cursor-routing] host command exit status: 0: screen
2018-01-29@13:43:05.439 [cursor-routing] cursor routing: moved: [14,23] ->
[13,23] (2ms)
2018-01-29@13:43:05.439 [tune-thread] MIDI enabled
2018-01-29@13:43:05.440 [tune-thread] tone: MSecs:10 Note:55
2018-01-29@13:43:05.444 [cursor-routing] cursor routing: move: left
2018-01-29@13:43:05.445 [cursor-routing] screen driver: insert key: 0XF804
2018-01-29@13:43:05.445 [cursor-routing] screen driver: insert bytes: 1B 5B 44
2018-01-29@13:43:05.445 [cursor-routing] starting host command: screen -p 1 -X
stuff [D
2018-01-29@13:43:05.452 [tune-thread] tone: MSecs:60 Note:0
2018-01-29@13:43:05.453 [cursor-routing] host command exit status: 0: screen
2018-01-29@13:43:05.454 [cursor-routing] cursor routing: moved: [13,23] ->
[12,23] (2ms)
2018-01-29@13:43:05.461 [main] Darwin error 0XFFFFFFFFE00002EB.
2018-01-29@13:43:05.461 [main] USB endpoint read error 89: Operation canceled.
2018-01-29@13:43:05.462 [main] command: 00004A (RESTARTBRL: restart braille
driver)
2018-01-29@13:43:05.462 [main] activity action request: braille-driver: stop
2018-01-29@13:43:05.462 [main] activity state change: braille-driver:
9[stopping]
2018-01-29@13:43:05.462 [main] report listener unregistered: 0: 0x102307e90
2018-01-29@13:43:05.466 [main] activity state change: braille-driver: 0[stopped]
2018-01-29@13:43:05.466 [main] reinitializing braille driver
2018-01-29@13:43:05.466 [main] activity action request: braille-driver: start
2018-01-29@13:43:05.466 [main] activity state change: braille-driver:
4[preparing]
2018-01-29@13:43:05.466 [main] Braille Display Dimensions: 1 row, 1 column
2018-01-29@13:43:05.467 [main] regions: text=0.1 status=0.0
2018-01-29@13:43:05.467 [main] shifts: full=1 half=0 vertical=5
2018-01-29@13:43:05.467 [main] activity state change: braille-driver:
1[prepared]
2018-01-29@13:43:05.467 [main] activity state change: braille-driver:
2[scheduled]
2018-01-29@13:43:05.467 [main] activity state change: braille-driver:
6[starting]
2018-01-29@13:43:05.468 [main] checking braille device: usb:
2018-01-29@13:43:05.468 [main] checking for braille driver: hm
2018-01-29@13:43:05.468 [main] initializing braille driver: hm -> usb:
2018-01-29@13:43:05.473 [main] USB: Manufacturer Name: Samsung
2018-01-29@13:43:05.473 [main] USB: Product Description: Generic USB Serial
2018-01-29@13:43:05.473 [main] usbDisableAutosuspend error 78: Function not
implemented.
2018-01-29@13:43:05.474 [main] USB device opened: vendor=045E product=930B
2018-01-29@13:43:05.497 [main] detected: Braille Edge
2018-01-29@13:43:05.517 [tune-thread] tone: MSecs:15 Note:60
2018-01-29@13:43:05.533 [tune-thread] tone: MSecs:60 Note:64
2018-01-29@13:43:05.596 [tune-thread] tone: MSecs:20 Note:76
2018-01-29@13:43:05.618 [tune-thread] tone: MSecs:60 Note:64
2018-01-29@13:43:05.682 [tune-thread] tone: MSecs:60 Note:57
2018-01-29@13:43:05.720 [main] Braille Display Dimensions: 1 row, 40 columns
2018-01-29@13:43:05.720 [main] regions: text=0.40 status=0.0
2018-01-29@13:43:05.721 [main] shifts: full=40 half=20 vertical=5
2018-01-29@13:43:05.721 [main] Key Bindings: edge
2018-01-29@13:43:05.721 [main] file opened: /etc/brltty/Input/hm/edge.ktb fd=17
2018-01-29@13:43:05.721 [main] including data file:
/etc/brltty/Input/hm/edge.ktb
2018-01-29@13:43:05.722 [main] file opened: /etc/brltty/Input/hm/common.kti
fd=18
2018-01-29@13:43:05.722 [main] including data file:
/etc/brltty/Input/hm/common.kti
2018-01-29@13:43:05.722 [main] file opened: /etc/brltty/Input/hm/scroll.kti
fd=18
2018-01-29@13:43:05.722 [main] including data file:
/etc/brltty/Input/hm/scroll.kti
2018-01-29@13:43:05.723 [main] file opened: /etc/brltty/Input/hm/left.kti fd=18
2018-01-29@13:43:05.723 [main] including data file:
/etc/brltty/Input/hm/left.kti
2018-01-29@13:43:05.723 [main] file opened: /etc/brltty/Input/hm/right.kti fd=18
2018-01-29@13:43:05.724 [main] including data file:
/etc/brltty/Input/hm/right.kti
2018-01-29@13:43:05.724 [main] file opened: /etc/brltty/Input/hm/f18.kti fd=18
2018-01-29@13:43:05.724 [main] including data file: /etc/brltty/Input/hm/f18.kti
2018-01-29@13:43:05.724 [main] file opened: /etc/brltty/Input/hm/contexts.kti
fd=18
2018-01-29@13:43:05.725 [main] including data file:
/etc/brltty/Input/hm/contexts.kti
2018-01-29@13:43:05.725 [main] file opened: /etc/brltty/Input/hm/braille.kti
fd=18
2018-01-29@13:43:05.725 [main] including data file:
/etc/brltty/Input/hm/braille.kti
2018-01-29@13:43:05.725 [main] file opened: /etc/brltty/Input/hm/../chords.kti
fd=19
2018-01-29@13:43:05.726 [main] including data file:
/etc/brltty/Input/hm/../chords.kti
2018-01-29@13:43:05.726 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:43:05.726 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:43:05.726 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:43:05.727 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:43:05.727 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:43:05.727 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:43:05.727 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:43:05.728 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:43:05.728 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:43:05.728 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:43:05.728 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:43:05.729 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:43:05.729 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:43:05.729 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:43:05.730 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:43:05.730 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:43:05.730 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:43:05.731 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:43:05.731 [main] file opened: /etc/brltty/Input/hm/../toggle.kti
fd=20
2018-01-29@13:43:05.731 [main] including data file:
/etc/brltty/Input/hm/../toggle.kti
2018-01-29@13:43:05.731 [main] file opened: /etc/brltty/Input/hm/../menu.kti
fd=20
2018-01-29@13:43:05.732 [main] including data file:
/etc/brltty/Input/hm/../menu.kti
2018-01-29@13:43:05.733 [main] Key Table: /etc/brltty/Input/hm/edge.ktb
2018-01-29@13:43:05.734 [main] Braille Driver: hm [HIMS]
2018-01-29@13:43:05.734 [main] HIMS Braille Driver:
2018-01-29@13:43:05.734 [main] Braille Device: usb:
2018-01-29@13:43:05.735 [main] Old Preferences File: /etc/brltty-hm.prefs
2018-01-29@13:43:05.735 [main] report listener registered: 0: 0x102307e90
2018-01-29@13:43:05.735 [main] cannot open file: /etc/brltty-hm.prefs: No such
file or directory
2018-01-29@13:43:05.735 [main] regions: text=0.40 status=0.0
2018-01-29@13:43:05.736 [main] shifts: full=40 half=20 vertical=5
2018-01-29@13:43:05.736 [main] activity state change: braille-driver: 3[started]
2018-01-29@13:43:05.746 [tune-thread] tone: MSecs:60 Note:64
2018-01-29@13:43:05.759 [main] report listener unregistered: 0: 0x102307e90
2018-01-29@13:43:05.759 [main] pushed command environment: message
2018-01-29@13:43:05.759 [main] pushed command handler: message
2018-01-29@13:43:05.810 [tune-thread] tone: MSecs:100 Note:69
2018-01-29@13:43:07.842 [tune-thread] MIDI disabled
2018-01-29@13:43:09.761 [main] popped command handler: message
2018-01-29@13:43:09.761 [main] popped command environment: message
2018-01-29@13:43:09.761 [main] report listener registered: 0: 0x102307e90
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://brltty.com/mailman/listinfo/brltty
