I forgot to mention that my device is set to 9600 baud, 8 bits, 1 stop bits and no parity and no handshake.
Same on pc side at the usb to serial bridge configuration.
2018. 04. 16. 11:11 keltezéssel, Velegi István írta:
Hi All,

I am running latest windows 10 vv1709 and brltty latest build for windows. I am having a braille lite m40 device which works with jaws but I can't get it work with brltty and nvda. As I use an usb to serial adapter I checked the com port number of my adapter.
Below I am copying the lines from brltty..conf.
braille-device serial:COM5
braille-driver bl    # BrailleLite
braille-parameters bl:BaudRate=9600 # [300,600,1200,2400,4800,9600,19200,38400]
braille-parameters bl:KbEmu=yes # [yes,no]
I tried changing the driver to fs but no success.
I have also installed brlapi but it didn't help either. In nvda latest snapshot version if I choose brltty as braille display I get error saying "couldn't load brltty".

Do you have any idea to solve this problem?

Best regards,
Istvan


_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: BRLTTY@brltty.com
For general information, go to: http://brltty.com/mailman/listinfo/brltty

Reply via email to