Hi all, Unfortunately I had to return the Alva display since I only borrowed it a little while for testing. I will have access to it again somewhere next week, and I'll try out the all the things suggested.
My tests so far were all using USB->COM adapters, since I don't have computers around that still have real COM ports. I was using brltty 3.10-2, but I changed the path manually. I didn't think it would make a difference. I'll try the original path + reinstalling libusb and see how far I get. Cheers, Thijs On Thu, Oct 30, 2008 at 5:32 PM, Lee Maschmeyer <[EMAIL PROTECTED]>wrote: > Hi Thijs, > > Your path is different. Unless you changed it, you may be using an older > version of brltty 3.10 for Windows. I'm using an Alva ABT340 and mine works > with virtually the same command. The current version has a path of > brltty-3.10-2 in case that helps. > > Note that the ABT340 has a real serial port and so does my computer. The > cable is a null modem cable and I imagine all Alvas use those. > > HTH, > > -- > > Lee Maschmeyer > Wayne State University > Detroit, Michigan, USA > > > _______________________________________________ > This message was sent via the BRLTTY mailing list. > To post a message, send an e-mail to: [email protected] > For general information, go to: http://mielke.cc/mailman/listinfo/brltty >
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
