On Fri, Mar 13, 2009 at 09:43:25AM -0400, Dave Mielke wrote: > [quoted lines by Daniel Dalton on 2009/03/13 at 22:41 +1100] > > >Any other ideas? > > The default PCM support is for OSS. If you'd rather use ALSA then you have to > configure brltty at build time with: > > --enable-pcm-support=alsa
I ran the following: cd to_brltty_checkout_directory make clean && ./autogen && ./configure --enable-pcm-support=alsa && make && sudo make install I then restarted brltty: sudo killall brltty sudo /bin/brltty I also tried with the init.d script: sudo /etc/init.d/brltty restart I then tried with these lines in my config file, tried one at a time of course then the other after restarting brltty: I tried with pcm-device pcm-handle-id:0,0 # ALSA (see second parameter of snd_pcm_open) and pcm-device hw:0,0 # ALSA (see second parameter of snd_pcm_open) No tunes heard... I have some soft music playing in the background through mpd (alsa)... I also saw this line: #pcm-device /path/to/device # most methods Could I use this and just point it to the alsa device? If so how should it look? Any other ideas? Thanks! Daniel. P.s, Pcm volume in the prefs menu is on 90 and my tune device is set to pcm digital soundcard of course! Thanks. _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
