On Sat, Mar 21, 2009 at 06:42:47PM +1100, Jason White wrote: > Daniel Dalton <[email protected]> wrote: > > > I guess it must be brltty if he and I are running the same versions of > > liblouis and orca, and he gets g2 braille, but I don't. The only > > difference is brltty, although gnome versions may differ oh and > > distrobutions of course... > > Let's start from the beginning. > > Is Liblouis installed properly? If you run the command line tools that come > with it, does it produce braille? I haven't looked at liblouis yet, but these > are general points to consider.
I should double check it is working yes. > > Next, make sure that BRLTTY and Orca are cooperating, i.e., without liblouis > in the configuration, BrlAPI should enable braille support to function > correctly within Orca. They do, computer braille works. > > Next, configure Orca to load liblouis. I'm not sure how best to test this, > but, basically, you want to know whether Orca finds the library. Again, not sure how to do this, maybe the braille monitor may help as if it displays the dots it may eliminate brltty, but then again it may not... Here is my brltty log when I tried orca with grade 2. Do you see anything in here to worry about? I saw a few warnings, so that's why I'm not confident brltty is working 100%... Thanks, Daniel.
BRLTTY 3.11dev rev 4351M [http://mielke.cc/brltty/] brltty: Working Directory: /etc/brltty brltty: Writable Directory: /lib/brltty/rw brltty: Configuration File: /etc/brltty.conf brltty: Data Directory: /etc/brltty brltty: Library Directory: /lib/brltty brltty: Tables Directory: /etc/brltty brltty: file opened: /etc/brltty/en_US.ttb fd=3 brltty: including data file: /etc/brltty/en_US.ttb brltty: file opened: /etc/brltty/letters-latin.tti fd=4 brltty: including data file: /etc/brltty/letters-latin.tti brltty: file opened: /etc/brltty/control-latin.tti fd=4 brltty: including data file: /etc/brltty/control-latin.tti brltty: file opened: /etc/brltty/numbers-nemeth.tti fd=4 brltty: including data file: /etc/brltty/numbers-nemeth.tti brltty: file opened: /etc/brltty/common.tti fd=4 brltty: including data file: /etc/brltty/common.tti brltty: file opened: /etc/brltty/spaces.tti fd=5 brltty: including data file: /etc/brltty/spaces.tti brltty: file opened: /etc/brltty/boxes.tti fd=5 brltty: including data file: /etc/brltty/boxes.tti brltty: Text Table: en_US brltty: Attributes Table: attributes brltty: compiling contraction table: /etc/brltty/en-ueb-g2.ctb brltty: file opened: /etc/brltty/en-ueb-g2.ctb fd=3 brltty: including data file: /etc/brltty/en-ueb-g2.ctb brltty: file opened: /etc/brltty/letters-latin.cti fd=4 brltty: including data file: /etc/brltty/letters-latin.cti brltty: Contraction Table: en-ueb-g2 brltty: Key Table: none brltty: Keyboard Property: type= brltty: Keyboard Property: vendor= brltty: Keyboard Property: product= brltty: checking for screen driver: lx brltty: initializing screen driver: lx brltty: device directory: /dev brltty: checking screen device: /dev/vcsa brltty: screen device: vcsa brltty: checking console device: /dev/tty0 brltty: console device: tty0 brltty: device opened: /dev/vcsa: fd=3 brltty: screen opened: vcsa: fd=3 brltty: device opened: /dev/tty0: fd=4 brltty: console opened: tty0: fd=4 brltty: Screen Font Map Size: 297 brltty: VGA Character Count: 256(small) brltty: attributes masks: font=0000 unshifted=FF00 shifted=0000 brltty: Screen Driver: lx [Linux] brltty: Linux Screen Driver: brltty: Screen Parameter: charset= brltty: Screen Parameter: hfb= brltty: Screen Parameter: debugsfm= brltty: BrlAPI Server: release 0.5.3 brltty: API Parameter: auth= brltty: API Parameter: host= brltty: API Parameter: stacksize= brltty: socket 0 established (fd 5) brltty: exit status: 0 brltty: Console opened: fd=6 brltty: regions: text=0.0 status=0.0 brltty: shifts: full=1 half=0 vertical=5 brltty: checking braille device: serial:/dev/ttyUSB0 brltty: checking for braille driver: bn brltty: socket 1 established (fd 7) brltty: initializing braille driver: bn -> serial:/dev/ttyUSB0 brltty: serial device opened: /dev/ttyUSB0: fd=8 brltty: Braille Display Dimensions: 1 row, 32 columns brltty: regions: text=0.32 status=0.0 brltty: shifts: full=32 half=16 vertical=5 brltty: api link brltty: Braille Driver: bn [BrailleNote] brltty: BrailleNote Braille Driver: version 1.0 brltty: Braille Device: serial:/dev/ttyUSB0 brltty: Help File: brltty-bn.hlp brltty: Help Page: /etc/brltty/brltty-bn.hlp[0] brltty: Preferences File: /etc/brltty-bn.prefs brltty: file opened: /etc/brltty-bn.prefs fd=9 brltty: regions: text=0.32 status=0.0 brltty: shifts: full=32 half=16 vertical=5 brltty: ALSA PCM: Chan=1 Rate=16000 BufTim=170625 PerTim=21333 brltty: PCM enabled: blk=682 rate=16000 chan=1 fmt=5 brltty: tone: msec=60 smct=960 note=64 brltty: tone: msec=100 smct=1600 note=69 brltty: api unlink brltty: command: 000002 brltty: api link brltty: checking for speech driver: sd brltty: initializing speech driver: sd brltty: Speech Driver: sd [SpeechDispatcher] brltty: SpeechDispatcher Speech Driver: brltty: Speech Parameter: port= brltty: Speech Parameter: module= brltty: Speech Parameter: language= brltty: Speech Parameter: voice= brltty: setting speech rate: 18 brltty: set rate: 18 -> 80 brltty: setting speech volume: 20 brltty: set volume: 20 -> 100 brltty: setting speech pitch: 10 brltty: set pitch: 10 -> 0 brltty: setting speech punctuation: 2 brltty: set punctuation: 2 -> 0 brltty: Speech FIFO: none brltty: Screen Font Map Size: 297 brltty: VGA Character Count: 256(small) brltty: attributes masks: font=0000 unshifted=FF00 shifted=0000 brltty: GPM opened: fd=14 con=13 brltty: device opened: /dev/tty0: fd=15 brltty: console opened: tty0: fd=15 brltty: console closed: fd=4 brltty: Screen Font Map Size: 297 brltty: VGA Character Count: 256(small) brltty: attributes masks: font=0000 unshifted=FF00 shifted=0000 brltty: PCM disabled brltty: BrlAPI connection fd=4 accepted: local <unnamed> brltty: Authorization key loaded brltty: Received GetDisplaySize request on fd 4 brltty: Received enterTtyMode request on fd 4 brltty: adding range [0(0)..ffffffff(ffffffff)] brltty: removing range [20000000(0)..20000000(ffffffff)] brltty: removing range [20000046(0)..20000047(ffffffff)] brltty: removing range [2000004a(0)..2000004b(ffffffff)] brltty: removing range [20060000(0)..2006ffff(ffffffff)] brltty: removing range [20240000(0)..2024ffff(ffffffff)] brltty: removing range [20230000(0)..2023ffff(ffffffff)] brltty: removing range [20250000(0)..2025ffff(ffffffff)] brltty: allocated tty 0x00000007 brltty: Taking control of tty 0x00000007 (how=0) brltty: Received Write request on fd 4 brltty: Warning: Client uses deprecated regionBegin=0 and regionSize = 0 brltty: Received Write request on fd 4 brltty: charset UTF-8 brltty: writing exception 7 brltty: res != (size_t) -1 not met: invalid charset conversion brltty: exception 7 for packet type 119 on fd 4 brltty: Received IgnoreKeyRanges request on fd 4 brltty: range: [0000000000000000..ffffffffffffffff] brltty: removing range [0(0)..ffffffff(ffffffff)] brltty: read : Connection reset by peer (connection on fd 4) brltty: Client on fd 4 did not give up control of tty 0x00000007 properly brltty: Releasing tty 0x00000007 brltty: freeing tty 0x00000007 brltty: device opened: /dev/tty0: fd=4 brltty: console opened: tty0: fd=4 brltty: console closed: fd=15 brltty: Screen Font Map Size: 297 brltty: VGA Character Count: 256(small) brltty: attributes masks: font=0000 unshifted=FF00 shifted=0000 brltty: api unlink brltty: api link brltty: api unlink brltty: ALSA PCM: Chan=1 Rate=16000 BufTim=170625 PerTim=21333 brltty: PCM enabled: blk=682 rate=16000 chan=1 fmt=5 brltty: tone: msec=60 smct=960 note=64 brltty: tone: msec=60 smct=960 note=57 brltty: console closed: fd=4 brltty: screen closed: fd=3 brltty: PCM disabled
_______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
